우분투 Dapper 테스팅과 버그 모음집

firefox 1.5.0 rc2 가 올라왔네요. 멋쟁이~
근데 위에서 말씀하신 gcc 관련한 에러땜에 업글은 안됩니다.

After updating of udev (076-0ubuntu3), device-mapper complains "unable to find volume group "Ubuntu" at boot time with kernel 2.6.15. There is only "control" in /dev/mapper, no "Ubuntu-root" and "Ubuntu-swap_1" are there.

Flight CD 2 is ready. This is the second in a series of milestone CD
images that will be released throughout the Dapper development cycle, as
images that are known to be reasonably free of showstopper CD-build or
installer bugs, while representing very current snapshots of Dapper. You
can download it here:

Europe:
http://ftp.acc.umu.se/mirror/cdimage.ubuntu.com/releases/dapper/flight-2/ (Ubuntu)
http://ftp.acc.umu.se/mirror/cdimage.ubuntu.com/kubuntu/releases/dapper/flight-2/ (Kubuntu)

United Kingdom, and the rest of the world:
http://cdimage.ubuntu.com/releases/dapper/flight-2/ (Ubuntu)
http://cdimage.ubuntu.com/kubuntu/releases/dapper/flight-2/ (Kubuntu)

An Edubuntu release should follow soon. Please download using BitTorrent
if possible, and see http://wiki.ubuntu.com/Archive for other mirrors.

A list of notable changes in this release across the whole distribution
is available here, thanks to Matt Galvin:

http://wiki.ubuntu.com/DapperFlight2

This release has been somewhat delayed due to the switch to Linux 2.6.15
and the new hardware detection and activation infrastructure that comes
along with it (new udev and the demise of the old hotplug scripts; see
http://lists.ubuntu.com/archives/ubuntu-devel-announce/2005-December/000028.html).
This is mostly done now, but the whole point of getting it in early in
the Dapper development cycle was to attract as many bug reports about
breakage as possible, so please do report (component: linux or udev,
depending on the bug) any failures to detect your hardware, especially
if those failures are also regressions from Ubuntu 5.10.

This release also includes a new simplified live CD boot system
(http://wiki.ubuntu.com/SimplifiedLiveCD), included at the eleventh hour
because the alternative options stood a good chance of taking
considerably longer to get working. This system should ultimately end up
being faster and more visually pleasing than the one in Ubuntu 5.10, but
at the moment it's text-only, spews a lot of error messages, and
includes long delays with no progress feedback (we would really have
preferred to land it just after Flight CD 2 rather than just before if
it had been possible, but there we go). Please don't file bug reports
just about the ugliness; we are aware of it and it will be improved.

Other significant changes affecting the installer and live CD include:

* New graphical x86 CD bootloader screen, using gfxboot. This is
partly there for general aesthetics and partly in order to push
language selection back to the bootloader so that the live CD
doesn't have to ask any questions (keymap selection will move here
too but this hasn't been done yet). Bug reports (component: gfxboot)
on any quirks this displays on your machine would be appreciated.
While it's theoretically possible to enable this graphical
bootloader for the installed system too, the use case for that is
less immediately compelling and we probably won't look at it until
after Dapper.

* Default vga16fb resolution changed to 640x400. This should avoid the
need to boot many machines with kernel arguments like vga=771 just
to be able to see all of the screens displayed by the installer. We
don't think that this change should make things worse on any
machines, but if it does, please file a bug report (component:
linux).

* New udev-based PCMCIA infrastructure supporting the new kernel.
cardmgr from pcmcia-cs is no longer especially useful, but I
recommend not storming ahead and purging pcmcia-cs just yet; that
includes some configuration files that we still need. If your PCMCIA
cards don't activate properly, then please file a bug report
(component: pcmciautils).

* Switched to rewritten versions of the APT configuration and
user/password configuration screens in the installer. The former
will no longer ask duplicate questions in netboot installs, and the
latter is now asked before base system installation.

* 'localhost.localdomain' is no longer made the canonical hostname of
127.0.0.1; the old behaviour broke some applications.

* Automatic LVM configuration options are now available on powerpc
too.

* Various enhancements to rescue mode. On powerpc, it now knows how to
offer an option to reinstall the yaboot bootloader; this will be
added for other architectures and bootloaders in time too.

* Added boot performance measurement support to the live CD; use the
'bootchart' boot parameter to enable this.

* Added a "boot from first hard disk" option to the CD boot menu.

* Live CD boot text fixed (erratum from Flight CD 1).

* Appearance of debconf priority question before reboot fixed (erratum
from Flight CD 1).

Known bugs:

* Network interfaces may not be brought up automatically on boot.
Putting 'auto eth0' (or whatever your interface is called) in
/etc/network/interfaces generally fixes this, although I'm not sure
what the final fix is going to be yet.

* Rescue mode selection is broken on some images when booting on an
x86-64-class computer. The underlying issue has already been fixed,
but it was going to take too long to run around rebuilding all the
images. As a workaround at the boot screen, select the "Install to
the hard disk" option, press F3 to edit boot options, and add
"rescue/enable=true".

* Rescue mode doesn't work on the live CD any more, as a casualty of
the simplified live CD. I may bring it back at the cost of CD space,
or we may do something else in the simplified environment; this has
not yet been decided.

* Network devices that require firmware will not be detected by the
installer (a udev-udeb bug).

* If the installer fails to detect your network card, then it's harder
than it should be to continue without the network card and sort it
out later. This bug was introduced by moving to the new apt-setup.

* The live CD now uses unionfs, which seems very flaky on powerpc.
Testing is welcome to check that it isn't just my machine; if that's
the case, we will drop back to the old device-mapper snapshot
approach there.

If you're interested in following changes as we further develop Dapper,
have a look at the dapper-changes list:

http://lists.ubuntu.com/mailman/listinfo/dapper-changes

We also suggest that you subscribe to the ubuntu-devel-announce list if
you're interested in following Ubuntu development. This is a low-traffic
list (a few posts a week) carrying announcements of approved
specifications, policy changes, alpha releases, and other interesting
events. Future Flight CD announcements may only go to this list.

http://lists.ubuntu.com/mailman/listinfo/ubuntu-devel-announce

The Testing area of the wiki suggests various tests that can be
performed on Flight CD releases to try to catch bugs far enough before
the final release that they can be fixed:

http://wiki.ubuntu.com/Testing

Bug reports should go here for now (although we intend to switch over to
Launchpad's bug tracking facilities soon):

https://bugzilla.ubuntu.com/

Enjoy,

--
Colin Watson

ubuntu와 kubuntu livecd 둘 다 받아서 써 봤는데요.
kubuntu livecd로 부팅한 후에 static ip로 네트워크를 설정을 했습니다.
그런데 default gateway가 제대로 설정이 안 되는 것 같습니다.
분명히 default gateway 항목에 내용을 써 주었습니다.

Konsole에서 route -n 하면 항목이 단 하나만 나옵니다. 0.0.0.0 으로
시작하는 것이 안 나오네요. 예전에도 이같은 이유로 kubuntu를 접었던
기억이...

nautilus (2.13.3-0ubuntu3) dapper; urgency=low
.
* debian/patches/07_copy_dialog_fix.patch:
- fix an issue with the copy dialog due the new eel (Ubuntu: #21079)

#deb cdrom:[Ubuntu 5.10 _Breezy Badger_ - Alpha i386 (20050817)]/ breezy main restricted

deb http://archive.ubuntu.com/ubuntu dapper main restricted
deb-src http://archive.ubuntu.com/ubuntu dapper main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://archive.ubuntu.com/ubuntu dapper-updates main restricted
deb-src http://archive.ubuntu.com/ubuntu dapper-updates main restricted

## Uncomment the following two lines to add software from the 'universe'
## repository.
## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://archive.ubuntu.com/ubuntu dapper universe
deb-src http://archive.ubuntu.com/ubuntu dapper universe

deb http://security.ubuntu.com/ubuntu dapper-security main restricted
deb-src http://security.ubuntu.com/ubuntu dapper-security main restricted

deb http://security.ubuntu.com/ubuntu dapper-security universe
deb-src http://security.ubuntu.com/ubuntu dapper-security universe

deb http://archive.ubuntu.com/ubuntu dapper multiverse
deb-src http://archive.ubuntu.com/ubuntu dapper multiverse

# For freenx
#deb http://seveas.ubuntulinux.nl/ ubuntu-seveas freenx
#deb http://free.linux.hp.com/~brett/seveas/freenx/ ubuntu-seveas freenx

1. apt-get으로 im-switch 와 nabi를 설치합니다.
2. panel에서 나비를 종료합니다.
3. ~/.gnomerc 등에 nabi 설정을 넣어두었으니 이 파일을 .gnomerc.backup 등으로 변경해 놓습니다.
4. 그놈 로그아웃 합니다. (save current setup 해서 이미 nabi가 종료되어 없는 설정을 저장합니다.)
5. ctrl-alt-backspace로 X를 다시 시작합니다.
6. 아무 설정 없이 nabi가 패널에 시작되는 것을 볼 수 있습니다.

/etc/X11/xinit/xinput.d/nabi

XIM=nabi
XIM_PROGRAM=/usr/bin/nabi
XIM_ARGS=
GTK_IM_MODULE=xim

im-switch -s nabi (nabi를 im으로 사용한다는 것을 알리는 것입니다.)
그러면, ~/.xinput.d/en_US이라는 위의 xinput.d/nabi와 같은 설정의 파일이 생깁니다.
그 이후는 위와 동일.

#ifndef u8
#define u8 unsigned char
#endif