구형노트북 (대우 486 노트북)에 데비안 potato 설치중입니다.

플로피 설치는 처음이라 무척 지루하고 재미있었습니다 ;;;

먼저 dmesg 결과입니다.

Linux version 2.2.14 (herbert@gondor) (gcc version 2.95.2 19991103 (Debian GNU/Linux)) #1 Sun Jan 16 13:48:57 EST 2000
Console: colour VGA+ 80x25
Calibration delay loop... 49.97 BogoMIPS
Memory: 17656k/20480k available (1628k kernel code, 416 reserved, 640k data, 140k init)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry hash table entries:4096 (order 3, 32k)
Buffer cache hash table entires: 16384 (order 4, 64k)
Page cache hash table entries: 8192 (order 3, 32k)
CPU: AMD 486 DX/4 stepping 04
Checking 386;/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: No PCI bus detected
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 32768 bhash 32768)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.0 Flags 0x03 (Driver version 1.9)
apm: disabled on user request.
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
hd1: C/H/S=0/0/0 from BIOS ignored
hda: IBM-DBOA-2540, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DBOA-2540, 516MB w/64kB cache, CHS=525/32/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is an 8272A
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (nocard)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
qlogicisp : PCI not present
qlogicfc : PCI not present
eata_pio: No BIOS32 extensions present. This driver release still depends on it.
	Skipping scan for PCI HBAs.
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: No Microchannel-bus support present -> Aborting.
DC390: No PCI BIOS found!
DC390: 0 adapters found
megaraid: v1.05 (October 27,1999)
aec7\671x_detect:
	NO PCI SUPPORT.
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 140k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap:89708k swap-space (priority -1)
NTF version 990411
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Linux PCMCIA Card Services 3.1.8
  Kernel build: 2.2.14 unknown
  options: [pci] [cardbus] [apm]
Databook TCIC-2 PCMCIA probe: DB86072, 2sockets
  irq list (scanned) = 7,10,11 sktirq is irq 11, status changed on irq 11
cs: IO oprt probe ~~~
cs: IO port probe 0x0a00-0x0aff: excluding 0xa20-0xa2f 0xa40-0xa4f 0xaf8-0xaff
cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xdffff
cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xc7fff

네트ㅤㅇㅝㅋ이 안되서 손으로 한 15분간 그렸습니다 :oops:

지금 가지고 있는 랜카드가

BUFFALO AirStation /
WLI-PCM-L11GP /
16BIT, 5v , 무선랜 11메가짜리입니다.

Melco (Agere? / Lucent? / Orinoco?) 칩셋이구요

커널 2.4.x에서는 orinoco.o orinoco_cs.o로 뭔가 잡히는듯 하다가 아무것도 안되었었습니다.

2.2.x대 커널에서는 이 모듈들마저 없네요

뭔가 고통스럽지 않고 손쉬운 방법으로 멋지게 해결하고 싶은 욕망이 솟아나는데 그렇게는 안될듯 합니다...

1. 커널 2.2.x대를 찾아서
2. 컴파일 옵션 조정(i486으로..)해서 컴파일 후
3. 오리놓고(orinoco) 모듈 생성
4. 구형노트북 하드를 뗘서 사용중인 노트북 멀티베이에 이식한 후 옮기기
5. 모듈 복사
6. 멀티베이에서 뜯어낸 후 구형노트북으로 다시 이식
7. 사용가능여부를 시험해보고 좌절한다...

대충 이런 스토리가 머리속에 그려지는데.... 괴룹습니다
(귀찮음이 더 큰 문제겠지요? ㅠㅠ;;; )

뭔가 멋들어진 해결방법이 없을까요?