커널 2.6.2 컴파일시...패닉문제...

글쓴이: gangster / 작성시간: 목, 2004/02/19 - 12:12오후

VFS : Cannot open root device "ram0" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic : VFS : Unable to mount root fs on unknown-block(0,0)
이런 메시지가 뜨구 부팅이 멈춰버립니다.

GRUB 설정상태
title Gentoo Linux(kernel 2.6.2)-test
root (hd0,6)
kernel /kernel-2.6.2 root=/dev/ram0 init=/linuxrc real_root=/dev/hda9 hdc=ide-scsi
initrd /initrd-2.6.2

지금 3박4일째 컴파일만 하고 있는데..계속 같은 문제입니다..

머가 잘못된거져?? :cry:

Forums:

설치 및 활용 QnA

댓글 달기

제 것은 다음과 같습니다.[code:1]default 0timeo

글쓴이: gnobus / 작성시간: 목, 2004/02/19 - 4:41오후

제 것은 다음과 같습니다.

default 0
timeout 10
splashimage=(hd1,4)/grub/splash.xpm.gz
                                                                                                                   
title=Gentoo Linux 1.4 (2.6.3)
root (hd1,4)
kernel (hd1,4)/kernel-2.6.3 root=/dev/hdb7 hdd=ide-scsi

(hd1,4) 가 /boot 파티션
/dev/hdb7 이 / 파티션입니다.

답글

아무래도..

글쓴이: gangster / 작성시간: 목, 2004/02/19 - 4:59오후

그렇게 고쳐봤는데..똑같습니다. :cry:

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

커널 옵션중에서 Ram disk를 추가하시고 컴파일 한 뒤 다시 해보시기

글쓴이: errai / 작성시간: 목, 2004/02/19 - 5:17오후

커널 옵션중에서 Ram disk를 추가하시고 컴파일 한 뒤 다시 해보시기 바랍니다.

답글

Re: 아무래도..

글쓴이: gnobus / 작성시간: 목, 2004/02/19 - 5:50오후

gangster wrote:

그렇게 고쳐봤는데..똑같습니다. :cry:

그럼 커널 옵션이 잘 못 됐을 가능성이 큽니다.
저도 예전에 수십 번...
다음 것 참고 삼아서 몇 개 넣고 빼고 하면 좋을 겁니다.

http://usr.gentoo.or.kr/forum/read.php?table=free&no=4885&page=1&o[sc]=t&o[ss]=config&o[st]=a&o[at]=s&o[sct]=s&o[stt]=s

다시 컴파일하시기 전에
make mrproper
하는 거 잊지 마시구요..

답글

먼가..

글쓴이: gangster / 작성시간: 금, 2004/02/20 - 11:03오후

gnobus님이 링크해주신 컨피크파일에서 글픽카드하고 사운드카드하고 저하고 다른부분 몇군데 고친다음 컴파일했는데..똑같은 에러가 납니다..
도저히 어디가문젠지....

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

/usr/src/linux-xxxxx/.config 화일을 먼저 올리

글쓴이: doodoo / 작성시간: 토, 2004/02/21 - 9:03오전

/usr/src/linux-xxxxx/.config
화일을 먼저 올리고 질문 하시면..다른 분들이
쉽게 답할수 있을것 같은데요 ^^:

답글

config 파일...

글쓴이: gangster / 작성시간: 토, 2004/02/21 - 11:11오전

한번봐주세여..
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
# CONFIG_STANDALONE is not set
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_RELAXED_AML is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX_CONFIG=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA23XX is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
CONFIG_GAMEPORT=y
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
CONFIG_AGP_NVIDIA=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m

#
# Supported Frontend Modules
#
# CONFIG_DVB_TWINHAN_DST is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_ALPS_TDLB7 is not set
# CONFIG_DVB_ALPS_TDMB7 is not set
# CONFIG_DVB_ATMEL_AT76C651 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_GRUNDIG_29504_491 is not set
# CONFIG_DVB_GRUNDIG_29504_401 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TDA1004X is not set

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_SKYSTAR is not set

#
# Supported BT878 Adapters
#

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="euc-kr"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
# CONFIG_STANDALONE is not set
CONFIG_BROKEN_ON_SMP=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=y

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=y

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# Bluetooth support
#
# CONFIG_BT is not set

#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_SKYSTAR is not set

#
# Supported BT878 Adapters
#

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

/etc/fstab을 봐야 하는데...에러 메시지상으로 보면 ro

글쓴이: gnobus / 작성시간: 토, 2004/02/21 - 7:14오후

/etc/fstab을 봐야 하는데...

에러 메시지상으로 보면 root fs를 마운트 못한다는 뜻입니다.
ext3 쓰시는 거 같은데.. 왜 그렇게 많이 선택하셨는지요.
맨위에 것 하나 또는 두개만 해주면 됩니다.
grub.conf도 왜 그렇게 복잡한지... :)

그리고 위에서도 말씀드렸다시피 어디서 .config 복사해 오기 전에
make mrproper
이렇게 청소를 꼭 해야 합니다.

젠투를 쓰시니까 genkernel로 시도해 보는 것도 좋겠지요.

답글

CONFIG_BLK_DEV_RAM=m RAM disk 설정이 모듈

글쓴이: doodoo / 작성시간: 토, 2004/02/21 - 11:19오후

CONFIG_BLK_DEV_RAM=m

RAM disk 설정이 모듈인것 같습니다.

커널에 내장 해야 하지 않을까요?
그리고 궁금한점 ......
RAM 디스크 왜 쓰시는지...?? 특수한 무슨 상황이 있나요?

보통 initrd 정도를 가지고 커널이 부팅시 필요한 모듈을 설정하는
정도인것으로 알고 있습니다..... 그리고 grub정보 페이지에서
real_root 라는 항목이 있나요??

참고로 저의 grub.conf화일 내용 입니다.default=3
timeout=10
shade 0
border 000000
foreground ffffff
background 000000
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
title WOWLiNUX (2.4.18-4)
root (hd0,1)
kernel /boot/vmlinuz-2.4.18-4 ro root=/dev/hda2 vga=788 hdb=ide-scsi
initrd /boot/initrd-2.4.18-4.img
title WOWLiNUX (bzImage_2.4.18-4)
root (hd0,1)
kernel /boot/vmlinuz-2.4.18-4custom ro root=/dev/hda2 vga=788 hdb=ide-scsi
initrd /boot/initrd--2.4.18-4custom.img
title WOWLiNUX (bzImage_2.6.2)
root (hd0,1)
kernel /boot/vmlinuz-2.6.2 ro root=/dev/hda2 vga=788
initrd /boot/initrd-2.6.2
title WOWLiNUX (bzImage_2.6.3)
root (hd0,1)
kernel /boot/vmlinuz-2.6.3 ro root=/dev/hda2 vga=788
initrd /boot/initrd-2.6.2
title win98
rootnoverify (hd0,0)
chainloader +1

답글

램디스크는 그냥..ㅡㅡ;;

글쓴이: gangster / 작성시간: 일, 2004/02/22 - 1:43오전

램디스크는 다른분들이 쓰시길래..특별히 쓰는 일은 없습니다.

다음은 제 fstab내용입니다.
title Windows 2000 Pro (SP4)
rootnoverify (hd0,0)
makeactive
chainloader +1

title Gentoo Linux(kernel 2.4.22)
root (hd0,6)
kernel /bzImage root=/dev/hda9 hdc=ide-scsi video=mtrr,vesa:1024x768 vga=0x317 splash=verbose
initrd /initrd-1024x768

title Gentoo Linux(kernel 2.6.2)-test1
root (hd0,6)
kernel /kernel-2.6.2 root=/dev/hda9 hdc=ide-scsi
initrd /initrd-2.6.2

title Gentoo(kernel test2)
root (hd0,6)
kernel /kernel-2.6.2 root=/dev/ram0 init=/linuxrc real_root=/dev/hda9
initrd /initrd-2.6.2

test1은 제가 설정한거고

test2는 어떤분이 이렇게 해보라고 해서 한건데..결국은 같은 에러가 납니다

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

genkernel...

글쓴이: gangster / 작성시간: 일, 2004/02/22 - 1:45오전

gnobus wrote:

/etc/fstab을 봐야 하는데...
에러 메시지상으로 보면 root fs를 마운트 못한다는 뜻입니다.
ext3 쓰시는 거 같은데.. 왜 그렇게 많이 선택하셨는지요.
맨위에 것 하나 또는 두개만 해주면 됩니다.
grub.conf도 왜 그렇게 복잡한지... :)

그리고 위에서도 말씀드렸다시피 어디서 .config 복사해 오기 전에
make mrproper
이렇게 청소를 꼭 해야 합니다.

젠투를 쓰시니까 genkernel로 시도해 보는 것도 좋겠지요.

genkernel로 시도해봤는데..

genkernel --menuconfig --kernel-config=/카피해온 설정파일 all

이렇게해서 다른분꺼 복사해본 컨피그 파일을 가지고 제꺼에 맞게 글픽하고 사운드정도만 수정해서 했는데 똑같오류입니다.

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

Re: 커널 2.6.2 컴파일시...패닉문제...

글쓴이: 정태영 / 작성시간: 일, 2004/02/22 - 9:27오전

gangster wrote:

VFS : Cannot open root device "ram0" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic : VFS : Unable to mount root fs on unknown-block(0,0)
이런 메시지가 뜨구 부팅이 멈춰버립니다.

root fs를 마운트하지 못하는건.. 대게..
rootfs가 사용하는 파티션 타입을 모듈로 하셨거나..

아니면.. 아예 설정에서 뺀 경우입니다..
혹시 rootfs를 xfs나 reiserfs로 사용하시나요?

# 
# File systems 
# 
CONFIG_EXT2_FS=y 
# CONFIG_EXT2_FS_XATTR is not set 
CONFIG_EXT3_FS=y 
CONFIG_EXT3_FS_XATTR=y 
CONFIG_EXT3_FS_POSIX_ACL=y 
CONFIG_EXT3_FS_SECURITY=y 
CONFIG_JBD=y 
# CONFIG_JBD_DEBUG is not set 
CONFIG_FS_MBCACHE=y 
# CONFIG_REISERFS_FS is not set 
# CONFIG_JFS_FS is not set 
CONFIG_FS_POSIX_ACL=y 
CONFIG_XFS_FS=m 
# CONFIG_XFS_RT is not set 
# CONFIG_XFS_QUOTA is not set 
# CONFIG_XFS_POSIX_ACL is not set 
# CONFIG_MINIX_FS is not set 
# CONFIG_ROMFS_FS is not set 
# CONFIG_QUOTA is not set 
# CONFIG_AUTOFS_FS is not set 
CONFIG_AUTOFS4_FS=y

보면.. xfs나.. reiserfs 는 포함되어 있지 않군요...

gangster wrote:

title Gentoo Linux(kernel 2.4.22)
root (hd0,6)
kernel /bzImage root=/dev/hda9 hdc=ide-scsi video=mtrr,vesa:1024x768 vga=0x317 splash=verbose
initrd /initrd-1024x768
title Gentoo Linux(kernel 2.6.2)-test1
root (hd0,6)
kernel /kernel-2.6.2 root=/dev/hda9 hdc=ide-scsi
initrd /initrd-2.6.2

title Gentoo(kernel test2)
root (hd0,6)
kernel /kernel-2.6.2 root=/dev/ram0 init=/linuxrc real_root=/dev/hda9
initrd /initrd-2.6.2

모두 test1 으로 했을때로 가정하고 한 얘기입니다 =3
아님 /dev/hda9 이.. /를 가리키는 파티션이 아니라면 문제가 될수도..

흠 fstab을 좀 보여주실 수 있으신지요..

오랫동안 꿈을 그리는 사람은 그 꿈을 닮아간다...

http://mytears.org ~(~_~)~
나 한줄기 바람처럼..

답글

사용하는 파티션..

글쓴이: gangster / 작성시간: 일, 2004/02/22 - 11:57오전

ext3를 사용하고 있습니다.

그래서 ext2,3외에는 포함안한걸로 기억을하는데,..

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

/etc/fstab을 올려보세요.위에 있는건 /boot/grub/gr

글쓴이: codebank / 작성시간: 일, 2004/02/22 - 1:25오후

/etc/fstab을 올려보세요.
위에 있는건 /boot/grub/grub.conf입니다.
저도 커널 패닉이 두어번쯤 일어나서 찾아해매다가 성공한적이 있는데 그때 기억으로는
두가지가 있더군요.

첫번째는 커널에 ext3를 모듈(M)으로 설정했을때 패닉을 일으킵니다.
- 모듈이 아닌 직접커널에 넣는 방법(Y)로 해결했죠.
두번째는 /boot를 링크하지 않고 이미지를 복사했을때죠.
- 보통 gentoo에서는 /etc/fstab의 boot부분이 1 1이나 1 2로 되어있는데 이럴경우는
부팅시에만 참조하고 부팅후에는 mount를 시켜놓지 않더군요.
커널 컴파일을하기전에 /boot영역을 mount시켜놓고 커널 설치를 하는게 좋습니다.

어쨌든 /etc/fstab 파일을 올려놔보시기 바랍니다.

------------------------------
좋은 하루 되세요.

답글

/etc/fstab

글쓴이: gangster / 작성시간: 일, 2004/02/22 - 2:06오후

# <fs> <mountpoint> <type> <opts> <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda7 /boot ext3 noauto,noatime 1 2
/dev/hda9 / ext3 noatime 0 1
/dev/hdb1 /download ext3 noatime 0 1
/dev/hda8 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
/dev/fd0 /mnt/floppy auto noauto 0 0

none /proc proc defaults 0 0

none /dev/shm tmpfs defaults 0 0

컴파일전에 boot를 마운트하고서 컴팔했습니다.

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

꼭 이것이 문제이다라고 말할 수는 없지만 제가 볼때는 pass쪽에 문제가

글쓴이: codebank / 작성시간: 일, 2004/02/22 - 11:13오후

꼭 이것이 문제이다라고 말할 수는 없지만 제가 볼때는 pass쪽에 문제가 있어보입니다.
즉,

Quote:

/dev/hda7 /boot ext3 noauto,noatime 1 2
/dev/hda9 / ext3 noatime 0 1
/dev/hdb1 /download ext3 noatime 0 1
/dev/hda8 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
/dev/fd0 /mnt/floppy auto noauto 0 0
none /proc proc defaults 0 0

none /dev/shm tmpfs defaults 0 0

이부분들중에 /dev/hda9 / ext3 noatime 0 1이라고 되어있는데
사실 이부분이 0으로 되어야할것 같네요.
man페이지에서는 1일때는 root파일 시스템, 2일때는 다른 파일 시스템, 0일때는
fsck를 시행하지 않는다라고 나와있는데 여기서 root filesystem이라는 말이 조금
이상하게 들립니다.
즉, 보통 파티션을 나눌때 사용하는 /가 root이지만 여기서 root filesystem을 나타내는 말은
다른 뜻으로 들리거든요. 그러니까 boot영역같은 느낌을 줍니다.
저 부분을 1로 바꾸고 실행해보진 않았지만 보통은 0으로 잡아주기 때문에 그리
신경을 쓰지도 않았던 부분이거든요.
일단은

Quote:

/dev/hda7 /boot ext3 noauto,noatime 1 2
/dev/hda9 / ext3 noatime 0 0
/dev/hdb1 /download ext3 noatime 0 0
/dev/hda8 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
/dev/fd0 /mnt/floppy auto noauto 0 0
none /proc proc defaults 0 0

none /dev/shm tmpfs defaults 0 0

위에 굵게 표시된 부분을 수정해보세요.

다른 사이트에서는 pass에 대한 설명을 ext2 파티션일때만 1로하고 그렇지 않으면
0으로 하라고 나와있는곳도 있네요.
어쨌든 저부분을 한번 수정해 보시기 바랍니다.

P.S. : 제가 자주 들어올 수 있는것이 아니기에 메시지를 늦게 확인했네요.
답변이 늦어서 죄송합니다.

------------------------------
좋은 하루 되세요.

답글

fstab수정후..

글쓴이: gangster / 작성시간: 월, 2004/02/23 - 12:33오전

아무래도 그문제가 아닌듯..합니다.
/ 부분을 0 1 , 0 0 으로 고쳐서 해봤는데..

계속 같은에러만...........

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

CONFIG_BLK_DEV_RAM=m 부분을CONFIG_B

글쓴이: fibonacci / 작성시간: 월, 2004/02/23 - 12:48오전

CONFIG_BLK_DEV_RAM=m

부분을

CONFIG_BLK_DEV_RAM=y

로 바꾸어 보세요.

No Pain, No Gain.

답글

램디스크..

글쓴이: gangster / 작성시간: 월, 2004/02/23 - 1:34오전

램디스크 설정부분은...아닌것 같네여..

컴팔해봤는데 역시 같은 오류가 ^^;;

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

아직도 해결을 못하셨나보군요.두번째 하신분처럼 한번 grub의 설정을

글쓴이: codebank / 작성시간: 수, 2004/02/25 - 2:37오전

아직도 해결을 못하셨나보군요.
두번째 하신분처럼 한번 grub의 설정을 바꾸어서 해보시는건 어떨지 모르겠네요.

저같은경우는

Quote:

title Gentoo Linux
root (hd0,6)
kernel /boot/kernel-2.6.2 root=/dev/hda7 hdc=ide-scsi

정도로 해놓고 있습니다.
음... initrd도 빼보시고 kernel다음에 옵션도 /boot나 (hd0,4)등 실제 boot파티션을
대입해서 해보시는것도 좋겠죠.
그런데 2.4.22는 동작을 하는거겠죠?
그렇다면 아무리봐도 initrd쪽이 의심이 가는데... :)

------------------------------
좋은 하루 되세요.

답글

아직도

글쓴이: gangster / 작성시간: 수, 2004/02/25 - 2:46오전

codebank wrote:

아직도 해결을 못하셨나보군요.
두번째 하신분처럼 한번 grub의 설정을 바꾸어서 해보시는건 어떨지 모르겠네요.
저같은경우는

Quote:

title Gentoo Linux
root (hd0,6)
kernel /boot/kernel-2.6.2 root=/dev/hda7 hdc=ide-scsi

정도로 해놓고 있습니다.
음... initrd도 빼보시고 kernel다음에 옵션도 /boot나 (hd0,4)등 실제 boot파티션을
대입해서 해보시는것도 좋겠죠.
그런데 2.4.22는 동작을 하는거겠죠?
그렇다면 아무리봐도 initrd쪽이 의심이 가는데... :)

도

넹..당연히 ram0어쩌구 이런것도 빼구 커널만 가지고도 해봤습니다.

근데 안되더라구여

계속 같은에러..

그래서 2.4대의 다른커널을 컴파일해ㅥㅂㅏㅆ는데..아무문제없이돌아가여

아무래도 먼가 설정을 하나빠뜨린것같은데..먼지를 모르겠네여

gangster@gangster.cafe24.com
gangsterrapper@hanmail.net
gangsterrapper82@hotmail.com

답글

저는 ppc 에 gentoo를 설치한 경우라 좀 다를지 모르겠습니다만,

글쓴이: galien / 작성시간: 수, 2004/02/25 - 5:23오전

저는 ppc 에 gentoo를 설치한 경우라 좀 다를지 모르겠습니다만,

/etc/fstab에서 /boot를 주석처리해야 했던 기억이 나네요.

답글

리부트 하지 마시고, 컴퓨터를 껐다가 켜보세요.

글쓴이: kangbin / 작성시간: 화, 2004/04/27 - 11:37오후

제 노트북 IBM ThinkPad 570 에서 커널 2.6.5 (데비안 sarge)를 사용하다가 발견한 증상입니다.

커널 옵션에서 잘못 설정한 것이 아니라, 커널 2.6.x 자체의 버그 같습니다.

리부트 하면 하드 디스크는 인식하나, 파티션을 못찾습니다.
전원을 껐다가 켜면 제대로 됩니다.

커널 2.4.18에서는 제대로 동작합니다.

....

결론적으로 저 메시지는,

1. 해당 디스크를 못찾거나 ( root=/dev/hda? 등등으로 다시 설정 )
2. 해당 디스크의 파티션을 못찾거나 ( root=/dev/hda? 등등으로 다시 설정 )
3. 해당 디스크의 파티션의 파일 시스템 드라이버를 못찾거나
(커널의 해당 드라이버가 커널 이미지 안에 내장되어 있지 않든가,
initrd.img 로 램디스크 형식으로 들어가 있지 않든가)

해서 나오는 메시지 같습니다.

천지간에 일어나는 모든일은 노력한 만큼 이루어진다. - 한당

답글

저도 똑같은 현상으로 고생하고 있습니다.혹시 해결하셨으면 답글 올려주

글쓴이: aiasxp / 작성시간: 월, 2004/05/03 - 6:57오후

저도 똑같은 현상으로 고생하고 있습니다.
혹시 해결하셨으면 답글 올려주세요..

답글

아래의 링크 문서를 보세요

글쓴이: daihouying / 작성시간: 금, 2004/05/07 - 2:39오전

아래의 링크 문서를 보세요.저도 같은 문제였는데 되던데요.

http://kerneltrap.org/node/view/2685#7886

답글

댓글 달기

이름

제목

댓글 *

텍스트 포맷에 대한 자세한 정보

텍스트 양식

Filtered HTML

텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
You can use Textile markup to format text.
사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
Quick Tips:
- Two or more spaces at a line's end = Line break
- Double returns = Paragraph
- *Single asterisks* or _single underscores_ = Emphasis
- **Double** or __double__ = Strong
- This is [a link](http://the.link.example.com "The optional title text")
For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

HTML 태그를 사용할 수 없습니다.
web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
줄과 단락은 자동으로 분리됩니다.

CAPTCHA

이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.

부 메뉴

커널 2.6.2 컴파일시...패닉문제...

제 것은 다음과 같습니다.[code:1]default 0timeo

아무래도..

커널 옵션중에서 Ram disk를 추가하시고 컴파일 한 뒤 다시 해보시기

Re: 아무래도..

먼가..

/usr/src/linux-xxxxx/.config 화일을 먼저 올리

config 파일...

/etc/fstab을 봐야 하는데...에러 메시지상으로 보면 ro

CONFIG_BLK_DEV_RAM=m RAM disk 설정이 모듈

램디스크는 그냥..ㅡㅡ;;

genkernel...

Re: 커널 2.6.2 컴파일시...패닉문제...

사용하는 파티션..

/etc/fstab을 올려보세요.위에 있는건 /boot/grub/gr

/etc/fstab

꼭 이것이 문제이다라고 말할 수는 없지만 제가 볼때는 pass쪽에 문제가

fstab수정후..

CONFIG_BLK_DEV_RAM=m 부분을CONFIG_B

램디스크..

아직도 해결을 못하셨나보군요.두번째 하신분처럼 한번 grub의 설정을

아직도

저는 ppc 에 gentoo를 설치한 경우라 좀 다를지 모르겠습니다만,

리부트 하지 마시고, 컴퓨터를 껐다가 켜보세요.

저도 똑같은 현상으로 고생하고 있습니다.혹시 해결하셨으면 답글 올려주

아래의 링크 문서를 보세요

댓글 달기

Filtered HTML

BBCode

Textile

Markdown

Plain text

주 메뉴

둘러보기

부 메뉴

현재 위치

커널 2.6.2 컴파일시...패닉문제...

댓글 달기

Filtered HTML

BBCode

Textile

Markdown

Plain text

주 메뉴

검색 폼

둘러보기

사용자 로그인

Oauth2 Login :