사운드카드 인식은 되는데 소리가 안나옵니다.
글쓴이: jindol2k / 작성시간: 월, 2006/01/23 - 7:24오전
사운드 카드 인식은 하는거 같은데 Mplayer등으로 음악파일을 실행하면 뚜~뚜~뚜~ 기계음만 들립니다.
참고로 젠투를 사용중이며...시스템은 LG xnote le50-ace3모델을 사용중입니다. 사운드카드는 Sigmatel입니다.
Sigmatel홈피에 들어가보니 자기들은 칩만 팔아서 드라이버 제공은 못한다고 합니다.
자동으로 젠투에서 못잡아서 커널에서 ALSA와 OSS를 모두 선택해제 하고 emerge alsa-driver alsa-utils 를 설치했습니다.
설치후 alsaconf 를 실행해서 사운드카드를 설정하고 alsamixer에서 볼륨조절도 하였습니다.
lspci
00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a31 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc Unknown device 5a3f 00:07.0 PCI bridge: ATI Technologies Inc Unknown device 5a39 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 81) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) 00:14.2 Audio device: ATI Technologies Inc Unknown device 437b (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 01:05.0 VGA compatible controller: ATI Technologies Inc RS400 [Radeon Xpress 200M] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8036 PCI-E Fast Ethernet Controller (rev 12) 08:00.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller 08:00.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller 08:00.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller 08:00.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller 08:02.0 Network controller: RaLink RT2500 802.11G Cardbus/mini-PCI (rev 01)[/img]
dmesg
Linux version 2.6.12-gentoo-r10 (root@livecd) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Mon Jan 23 05:35:23 KST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ea0000 (usable)
BIOS-e820: 0000000037ea0000 - 0000000037eb2000 (ACPI data)
BIOS-e820: 0000000037eb2000 - 0000000037f00000 (ACPI NVS)
BIOS-e820: 0000000037f00000 - 0000000038000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
894MB LOWMEM available.
found SMP MP-table at 000f70b0
On node 0 totalpages: 229024
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 224928 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f7120
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x37eac0c9
ACPI: FADT (v001 LGE DEBORAH 0x06040000 LGE 0x000f4240) @ 0x37eb1ef6
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x37eb1f6aACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x37eb1fc4
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x37eac522
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x37eac307
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x37eac105
ACPI: DSDT (v001 LGE DEBORAH 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 38000000 (gap: 38000000:a8000000)
Built 1 zonelists
Kernel command line: root=/dev/hda3
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0487000 soft=c047f000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1733.646 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903496k/916096k available (2570k kernel code, 12140k reserved, 760k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3416.06 BogoMIPS (lpj=1708032)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
Total of 1 processors activated (3416.06 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd84d, last bus=14
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: Embedded Controller [EC] (gpe 29)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [CTHT] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
pnp: 00:08: ioport range 0x40b-0x40b has been reserved
pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
pnp: 00:08: ioport range 0xc00-0xc01 has been reserved
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
PCI: 0000:00:07.0 has unsupported PM cap regs version (3)
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie01]
Allocate Port Service[pcie03]
vesafb: ATI Technologies Inc., MS4 , 01.00 (OEM: ATI MOBILITY RADEON Xpress 200G Series)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5345
vesafb: pmi: set display start = c00c53b3, set palette = c00c53ed
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 600k, total 131072k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
ATIIXP: chipset revision 128
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: FUJITSU MHV2060AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
kjournald starting. Commit interval 5 seconds
Adding 1959920k swap on /dev/hda4. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
sk98lin: no version for "struct_module" found: kernel tainted.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
sk98lin: Network Device Driver v8.28.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8036 Fast Ethernet Controller
PrefPort:A RlmtMode:Check Link State
NTFS driver 2.1.22 [Flags: R/O MODULE].
NTFS-fs warning (device hda2): parse_options(): Option utf8 is no longer supported, using option nls=utf8. Please use option nls=utf8 in the future and make sure utf8 is compiled either as a module or into the kernel.
NTFS volume version 3.1.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Linux agpgart interface v0.101 (c) Dave Jones
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0004000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0005000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0006000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
usb 2-1: new low speed USB device using ohci_hcd and address 3
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
snd_page_alloc: No versions for exported symbols. Tainting kernel.
snd: No versions for exported symbols. Tainting kernel.
snd_timer: No versions for exported symbols. Tainting kernel.
snd_pcm: No versions for exported symbols. Tainting kernel.
snd_hda_codec: No versions for exported symbols. Tainting kernel.
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 20 (level, low) -> IRQ 20
Yenta: CardBus bridge found at 0000:08:00.0 [1854:0023]
yenta 0000:08:00.0: Preassigned resource 1 busy, reconfiguring...
Yenta: ISA IRQ mask 0x0ef8, PCI irq 20
Socket status: 30000006
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:08:00.2[A] -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0309000-c03097ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e091040350930d]
eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Real Time Clock Driver v1.12
input: PC Speaker
USB Universal Host Controller Interface driver v2.2
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: none
irq moderation: disabled
tcp offload: enabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
NET: Registered protocol family 10
Disabled Privacy Extensions on device c04015a0(lo)
IPv6 over IPv4 tunneling driver
snd_mixer_oss: No versions for exported symbols. Tainting kernel.
eth0: no IPv6 routers present
File attachments:
| 첨부 | 파일 크기 |
|---|---|
 1.png | 116.63 KB |
Forums:
w32codecs 는 설치하셨습니까?
w32codecs 는 설치하셨습니까?
[quote="golden"]w32codecs 는 설치하셨습니까?[/qu
USE 플래그에 추가시켰습니다. Mplayer뿐만 아니라 시디플레이어에 시디 넣고 플레이해도 같은 증상이...
Step by Step one goes far.
[code:1]00:14.2 Audio device: AT
00:14.2 Audio device: ATI Technologies Inc Unknown device 437b (rev 01)커널에서 사운드 카드를 못잡는거 아닐까요?
RET ;My life :P
[quote="Stand Alone Complex"][code:1]00&
그럼...커널에서 사운드카드를 잡을려면 어떻게 해야하는지...^^; 우분투에서는 잘 되던 사운드라서...젠투에서도 하는 방법이 있을텐데...초보라서 찾기가 힘드네요...
Step by Step one goes far.
커널 컴파일을 하실때 커널 컴파일 옵션에서 뭔가를 놓치시지는 않으셨을까요
커널 컴파일을 하실때 커널 컴파일 옵션에서 뭔가를 놓치시지는 않으셨을까요?
컴파일한 것이 아니시라면 별도로 커널 컴파일을 하셔야할지도 모릅니다.
RET ;My life :P
[quote="Stand Alone Complex"]커널 컴파일을 하실때
genkernel --menuconfig all 로 들어가서 ALSA와 OSS 모두 꺼주고 컴파일 했습니다. 사운드만 잡으면 장치드라이버 잡는건 거의 끝나는데...사운드가 마지막 꼬리를 붙잡네요...ㅡ.ㅡ;
Step by Step one goes far.
[quote="jindol2k"][quote="Stand Alone Co
모두 켜야하는게 정상 아닌가요..?
RET ;My life :P
[quote="Stand Alone Complex"][quote="jin
ALSA를 켜놓고 해도 안됬는거 같아서...흠...두개다 켜놓도 컴파일 해보고 다시 질문드릴께요^^; 어이없게라도 됬으면 좋겠네요...후...
Step by Step one goes far.
그리고 커널 옵션 설정하실때 experimental 옵션도 나오게 해서
그리고 커널 옵션 설정하실때 experimental 옵션도 나오게 해서 OSS랑 ALSA를 설정해주세요.
RET ;My life :P
[quote="jindol2k"]ALSA를 켜놓고 해도 안ㅤㄷㅚㅆ는거
제 기억으로는 사운드 코어 부분은 포함시켜 주어야 하는것으로 알고 있습니다.
alsa-driver 를 따로 쓰고 있으므로 alsa를 포함시킬 필요는 없습니다.
[quote="Stand Alone Complex"]그리고 커널 옵션 설
experimental 옵션이 어디에 있는건지 잘 모르겠네요...^^; 혹시 이거 인가요?
Symbol: EXPERIMENTAL [=y] │
│ Prompt: Prompt for development and/or incomplete code/drivers │
│ Defined at init/Kconfig:3 │
│ Location: │
│ -> Code maturity level options
사운드 코어 부분도 어디에 있는건지...^^; 커널부분은 많이 해보지 않아서...^^;
Step by Step one goes far.
[quote="jindol2k"][quote="Stand Alone Co
맞습니다.
아 그리고 우분투 라이브 시디로 부팅하셔서 lsmod한 결과랑 dmesg좀 올려주세요.
RET ;My life :P
[quote="jindol2k"]사운드 코어 부분도 어디에 있는건지...
make menuconfig (genkernel --menuconfig all) 하고나서
Device Drivers-->Sound-->Advanced Linux Sound Arch...
위와 같은 경로로 들어가면됩니다.
일단 처음부터 (제 커널 설정기준입니다.)
위와 같이 선택을 해주시고 PCI devices -->로 들어가시면 사운드카드를 선택할 수있는
부분이 있습니다.
정확한 사운드카드를 설정해주면 좋겠지만 일단 정확한 장치명을 모르니 모두 <M>으로
선택해주시면되겠습니다.
커널 컴파일후에 다시 부팅하여 새로운 커널로 부팅한 후에 자동으로 잡히는지
확인을 해보시고 자동으로 잡히지 않는다면 약간 힘들겠지만 각 드라이브를
하나하나 modprobe를 이용하여 메모리에 로드시켜 확인해보시는 방법이 있습니다.
자세한 설명은 나오지 않지만 검색결과 le50-ace4의 경우 'SigmaTel STAC9767 Codec'을
사용한다고 나오더군요. 사실 SigmaTel이라는 이름보다는 STAC9767이라는이름이
더 중요한데... :)
어쨌든 해당이름(STAC97xx)를 ALSA페이지에서 검색해보니 STAC9704T라는
이름이 검색되더군요. 해당모듈은 snd-au8820이므로 컴파일이 끝나고 재부팅이후
저 모듈부터 올려서 실험해보시는게 좋을 것 같습니다.
------------------------------
좋은 하루 되세요.
[quote="Stand Alone Complex"][quote="jin
우분투 라이브시디 부팅시에는 사운드카드를 못잡습니다. 우분투 설치후에는 잡히더군요...; 커널좀 만져보다가...정안되면 우분투 깔고 lsmod 랑 dmesg 올리겠습니다...^^; 답변 감사합니다^^
LE50-ACE4는 ACE3모델에 하드와 램만 업글 ㅤㄷㅚㅆ는 모델인데...
아마 사운드카드는 같을꺼 같네요...그리고 혹시 pcmcia를 설치안했는데...사운드카드랑 연관은 없겠죠?
말씀하신대로 한번 적용하고 다시 글 올리겠습니다...답변 감사합니다^^
Step by Step one goes far.
[quote]make menuconfig (genkernel --me
젠투 새로 설치 하고 snd-au8820 올렸으나 사운드카드 못잡는거 같습니다...흠...그놈을 아직 설치하지 않아서 정확히는 모르겠네요...그놈설치하고 다시 해봐야겠습니다. 커널컴파일 할때 설치한 사운드 모듈들이 있는 폴더가 어딘지 좀...^^;
Step by Step one goes far.
댓글 달기