CentOS 5.1 데스크톱 효과를 듀얼모니터 Seperated X screen으로 설정시 한쪽 모니터에 톱메뉴바가 사라지는 현상
글쓴이: xeno8263 / 작성시간: 수, 2008/02/20 - 8:20오후
안녕하세요. 리눅스를 시작한지 얼마 안되는 초보입니다.
CentOS 5.1에서 데스크톱 효과 : 윈도우매니져(compiz)+윈도우디코레이터(emerald)를 사용하고 있습니다.
그래픽 카드는 NVidia Geforce6200이구요, 20인치(1600x1200)하고 15인치(1024x768)로 듀얼모니터 Seperated X screen으로 사용하고 있습니다.
그런데, 한쪽 모니터에 창을 띄우면 위에 있어야 하는 톱메뉴바가 보이질 않습니다.
뭔가 설정이 잘못된 거 같은데 어떻게 해야할 지 모르겠네요..ㅠ_ㅠ
도움 부탁드립니다.
xorg.conf 파일 내용입니다.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Fri Jan 11 15:06:57 PST 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Jan 11 15:05:59 PST 2008
# Xorg configuration created by pyxf86config
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "extmod"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 61.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "AllowGLXWithComposite" "True"
# Option "XAANoOffscreenPixmaps"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
Option "DisableGLXRootClipping" "True"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6200"
Option "AllowGLXWithComposite" "True"
# Option "XAANoOffscreenPixmaps"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
Option "DisableGLXRootClipping" "True"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "TwinView" "0"
Option "metamodes" "DFP: 1600x1200_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: 1600x1200_60 +0+0"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT: 1024x768_60 +0+0"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSectionFile attachments:
| 첨부 | 파일 크기 |
|---|---|
 nobk.png | 206.26 KB |
Forums:
톱메뉴바 사라짐 해결...
screen 1에서 Alt+F2로 emerald -replace 하니까 해결되는 군요!
그런데 그놈의 시스템->세션->시작프로그램 설정에서
screen1에서 emerald -replace를 자동으로 실행하게 하려면 어떻게 설정해야 하나요?
댓글 달기