에구..지치는군요..

두주일 이상을 서버랑 연애중(?) 그건 일방적으로 당하고 있음..
물론 무식하니까 용감하지만(?) 이젠 지치는군요..네임서버는 잡아두면
얼마있다 다운되고 php로 작성된건 또 소스가 보이고 페이지가 넘어가지
못하고..게시판에 있는 모든 비방대로 해본지 어언..이주..잘 돌아가는것
같다 또 다시 자동으로 원상복구...후..뭐가 문제인지..그사이에 이해못할
reboot 두번..뭔지..드디어 오늘은 ftp까징..으...어찌해야할지..
지금은 정말 도움이 필요해용..

ip211.230.51.99
==== httpd.conf 참조 ====

#
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See for detailed information
about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you
are unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections
# 1. Directives that control the operation of the Apache server
process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main'
or 'default' server,
# which responds to requests that aren't handled by a virtual
host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be
sent to
# different IP addresses or hostnames and have them handled by
the
# same Apache server process.
#
# Configuration and logfile names If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive/" for
Win32), the
# server will use that explicit path. If the filenames do *not*
begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by
the
# server as "/usr/local/apache/logs/foo.log".
#

### Section 1 Global Environment
#
# The directives in this section affect the overall operation of
Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone. Inetd mode is only
supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at
);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"

#
# The LockFile directive sets the path to the lockfile used when
Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be
left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A
LOCAL
# DISK. The PID of the main server process is automatically appended
to
# the filename.
#
LockFile /var/run/httpd.lock

#
# PidFile The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid

#
# ScoreBoardFile File used to store internal server process
information.
# Not all architectures require this. But if yours does (you'll
know because
# this file will be created when you run Apache) then you *must*
ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile logs/apache_runtime_status

#
# In the standard configuration, the server will process httpd.conf
(this
# file, specified by the -f command line option), srm.conf, and
access.conf
# in that order. The latter two files are now distributed empty, as
it is
# recommended that all directives be kept in a single file for
simplicity.
# The commented-out values below are the built-in defaults. You can
have the
# server ignore these files altogether by using "/dev/null" (for
Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive Whether or not to allow persistent connections (more
than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off

#
# MaxKeepAliveRequests The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited
amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout Number of seconds to wait for the next request
from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle
transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 20

#
# Number of servers to start initially --- should be a reasonable
ballpark
# figure.
#
StartServers 8

#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO
LOW.
# It is intended mainly as a brake to keep a runaway server from
taking
# the system with it as it spirals down...
#
MaxClients 150

#
# MaxRequestsPerChild the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most
systems, this
# isn't really needed, but a few (such as Solaris) do have notable
leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE This value does not include keepalive requests after the
initial
# request per connection. For example, if a child process
handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 1000

#
# Listen Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the
# directive.
#
#Listen 3000
#Listen 12.34.56.7880
#Listen 80

#
# BindAddress You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain
name.
# See also the and Listen directives.
#
#BindAddress *
BindAddress 211.230.51.99
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as
a DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they
are used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `httpd -l' for the list of
already
# built-in (statically linked and thus always available) modules in
your httpd
# binary.
#
# Note The order in which modules are loaded is important. Don't
change
# the order below without expert advice.
#
# Example
# LoadModule foo_module modules/mod_foo.so

#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so

LoadModule bandwidth_module modules/mod_bandwidth.so


LoadModule throttle_module modules/mod_throttle.so

LoadModule env_module modules/mod_env.so
LoadModule config_log_module modules/mod_log_config.so
LoadModule agent_log_module modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule asis_module modules/mod_asis.so
LoadModule imap_module modules/mod_imap.so
LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
LoadModule db_auth_module modules/mod_auth_db.so
#LoadModule auth_any_module modules/mod_auth_any.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule auth_ldap_module modules/mod_auth_ldap.so
#LoadModule mysql_auth_module modules/mod_auth_mysql.so
#LoadModule auth_pgsql_module modules/mod_auth_pgsql.so
#LoadModule digest_module modules/mod_digest.so
#LoadModule proxy_module modules/libproxy.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so

LoadModule perl_module modules/libperl.so


LoadModule php_module modules/mod_php.so


LoadModule php3_module modules/libphp3.so


LoadModule php4_module modules/libphp4.so


LoadModule dav_module modules/libdav.so


LoadModule roaming_module modules/mod_roaming.so


LoadModule ssl_module modules/libssl.so


LoadModule put_module modules/mod_put.so


LoadModule python_module modules/mod_python.so

# Reconstruction of the complete module list from all available
modules
# (static and shared ones) to achieve correct module execution
order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS,
TOO]
ClearModuleList
#AddModule mod_mmap_static.c
AddModule mod_vhost_alias.c

AddModule mod_bandwidth.c


AddModule mod_throttle.c

AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_log_agent.c
AddModule mod_log_referer.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
AddModule mod_status.c
AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_auth_anon.c
AddModule mod_auth_db.c
#AddModule mod_auth_any.c
#AddModule mod_auth_dbm.c
#AddModule auth_ldap.c
#AddModule mod_auth_mysql.c
#AddModule mod_auth_pgsql.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
AddModule mod_expires.c
AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c

AddModule mod_perl.c


AddModule mod_php.c


AddModule mod_php3.c


AddModule mod_php4.c


AddModule mod_dav.c


AddModule mod_roaming.c


AddModule mod_ssl.c


AddModule mod_put.c


AddModule mod_python.c

#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is
Off.
#
#ExtendedStatus On

### Section 2 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# definition. These values also provide defaults for
# any containers you may define later in the file.
#
# All of these directives may appear inside containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# If your ServerType directive (set earlier in the 'Global
Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#

#
# Port The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80

##
## SSL Support
##
## When we also provide SSL we have to listen to the
## standard HTTP port (see above) and to the HTTPS port
##

Listen 80
Listen 443

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group The name (or #number) of the user/group to run httpd
as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and
the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
#
User nobody
Group nobody

#
# ServerAdmin Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages,
such
# as error documents.
#
ServerAdmin id0077@yahoo.co.kr

#
# ServerName allows you to set a host name which is sent back to
clients for
# your server if it's different than the one the program would get
(i.e., use
# "www" instead of the host's real name).
#
# Note You cannot just invent host names and hope they work. The
name you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP
address here.
# You will have to access it by its address (e.g.,
http//123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named
localhost. Your
# machine always knows itself by this address. If you use Apache
strictly for
# local testing and development, you may use 127.0.0.1 as the server
name.
#
ServerName ns.biolandltd.com

#
# DocumentRoot The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/home/bioland/public_html"

#
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#

Options FollowSymLinks
AllowOverride None

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working
as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options Indexes FollowSymLinks Includes

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination
of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all

#
# UserDir The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that
~userid
# must have permissions of 711, ~userid/public_html must have
permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also http//httpd.apache.org/docs/misc/FAQ.html#forbidden
#

UserDir public_html

#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#

AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#
# Order allow,deny
# Allow from all
#
#
# Order deny,allow
# Deny from all
#

#
# DirectoryIndex Name of the file or files to use as a pre-written
HTML
# directory index. Separate multiple entries with spaces.
#

DirectoryIndex index.html index.htm index.shtml index.php
index.php4 index.php3 index.phtml index.cgi

#
# AccessFileName The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#

Order allow,deny
Deny from all

#
# CacheNegotiatedDocs By default, Apache sends "Pragma no-cache"
with each
# document that was negotiated on the basis of content. This asks
proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName (new for 1.3) With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that
refers back
# to the server the response is coming from) it will use ServerName
and
# Port to form a "canonical" name. With this setting off, Apache
will
# use the hostnameport that the client supplied, when possible.
This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#

TypesConfig /etc/mime.types

#
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML
documents, "text/plain" is
# a good value. If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead
to
# keep browsers from trying to display binary files as though they
are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type. The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an
container.
# This means that the MIMEMagicFile directive will only be processed
if the
# module is part of the server.
#

# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic

#
# HostnameLookups Log the names of clients or just their IP
addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to
the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog The location of the error log file.
# If you do not specify an ErrorLog directive within a
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a

# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error_log

#
# LogLevel Control the number of messages logged to the error_log.
# Possible values include debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}
i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a
# container, they will be logged here. Contrariwise, if you *do*
# define per- access logfiles, transactions will be
# logged therein and *not* in this file.
#
# CustomLog /var/log/httpd/access_log common
CustomLog logs/access_log combined

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual
host
# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated
documents).
# Set to "EMail" to also include a mailto link to the ServerAdmin.
# Set to one of On | Off | EMail
#
ServerSignature On

# EBCDIC configuration
# (only for mainframes using the EBCDIC codeset, currently one of
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
#
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
#
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
#
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut */*

#
# Aliases Add here as many aliases as you need (with no limit). The
format is
# Alias fakename realname
#

#
# Note that if you include a trailing / on fakename then the
server will
# require it to be present in the URL. So "/icons" isn't
aliased in this
# example, only "/icons/". If the fakename is slash-terminated,
then the
# realname must also be slash terminated, and if the fakename
omits the
# trailing slash, the realname must also omit it.
#
Alias /icons/ "/var/www/icons/"

Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all

#
# ScriptAlias This controls which directories contain server
scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as
applications and
# run by the server when requested rather than as documents sent
to the client.
# The same rules about trailing "/" apply to ScriptAlias
directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

#
# "/var/www/cgi-bin" should be changed to whatever your
ScriptAliased
# CGI directory exists, if you have that configured.
#

AllowOverride None
Options None
Order allow,deny
Allow from all

# End of aliases.

#
# Redirect allows you to tell clients about documents which used to
exist in
# your server's namespace, but do not anymore. This allows you to
tell the
# clients where to look for the relocated document.
# Format Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory
listings.
#

#
# FancyIndexing is whether you want fancy directory indexing or
standard
#
IndexOptions FancyIndexing NameWidth=*

#
# AddIcon* directives tell the server which icon to show for
different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have
an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a
file in
# server-generated indexes. These are only displayed for
FancyIndexed
# directories.
# Format AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look
for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
# If MultiViews are amongst the Options in effect, the server
will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and
include
# it as plaintext if found.
#
ReadmeName README
HeaderName HEADER

#
# IndexIgnore is a set of filenames which directory indexing
should ignore
# and not include in the listing. Shell-style wildcarding is
permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

# End of indexing directives.

#
# Document types.
#

#
# AddEncoding allows you to have certain browsers (Mosaic/X
2.1+) uncompress
# information on the fly. Note Not all browsers support this.
# Despite the name similarity, the following Add* directives
have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

#
# AddLanguage allows you to specify the language of a document.
You can
# then use content negotiation to give a browser a file in a
language
# it can understand.
#
# Note 1 The suffix does not have to be the same as the
language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2 The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3 In the case of 'ltz' we violate the RFC by using a
three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage zh-tw .tw
AddLanguage tw .tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8

# LanguagePriority allows you to give precedence to some
languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We
have
# more or less alphabetized them here. You probably want to
change this.
#

LanguagePriority en da nl et fr de el it ja kr no pl pt pt-
br ru ltz ca es sv tw

#
# AddType allows you to tweak mime.types without actually
editing it, or to
# make certain files to be certain types.
#
# For example, the PHP 3.x module (not part of the Apache
distribution - see
# http//www.php.net) will typically use
#

AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps

#
# And for PHP 4.x, use
#

AddType application/x-httpd-php .php .php4 .php3 .phtml
AddType application/x-httpd-php-source .phps

#
# For PHP/FI (PHP2), use
#

AddType application/x-httpd-php .phtml

AddType application/x-tar .tgz

#
# AddHandler allows you to map certain file extensions
to "handlers",
# actions unrelated to filetype. These can be either built into
the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts
#
#AddHandler cgi-script .cgi

#
# To use server-parsed HTML files
#
AddType text/html .shtml
AddHandler server-parsed .shtml

#
# Uncomment the following line to enable Apache's send-asis HTTP
file
# feature
#
#AddHandler send-as-is asis

#
# If you wish to use server-parsed imagemap files, use
#
AddHandler imap-file map

#
# To enable type maps, you might want to use
#
#AddHandler type-map var

# End of document types.

#
# Action lets you define media types that will execute a script
whenever
# a matching file is called. This eliminates the need for repeated
URL
# pathnames for oft-used CGI file processors.
# Format Action media/type /cgi-script/location
# Format Action handler-name /cgi-script/location
#

#
# MetaDir specifies the name of the directory in which Apache can
find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix specifies the file name suffix for the file containing
the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get
output
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B. You can redirect to a script or a document using server-
side-includes.
#
# 3) external redirects
#ErrorDocument 402
http//some.other_server.com/subscription_info.html
# N.B. Many of the environment variables associated with the
original
# request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#

#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and
browsers that
# spoof it. There are known problems with these browser
implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not
properly
# support keepalive when it is used on 301 or 302 (redirect)
responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-
response-1.0

#
# The following directive disables HTTP/1.1 responses to
browsers which
# are in violation of the HTTP/1.0 spec by not being able to
grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

# End of browser customization directives

#
# If the perl module is installed, this will allow execution of
mod_perl
# to compile your scripts to subroutines which it will execute
directly,
# avoiding the costly compile process for most requests.
#
#
# Alias /perl /var/www/perl
#
# SetHandler perl-script
# PerlHandler ApacheRegistry
# Options +ExecCGI
#
#

#
# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/httpd/conf/passwd.
#
#
# Alias /upload /tmp
#
# EnablePut On
# AuthType Basic
# AuthName Temporary
# AuthUserFile /etc/httpd/conf/passwd
# EnableDelete Off
# umask 007
#
# require valid-user
#
#
#

#
# Allow server status reports, with the URL of
http//servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#

#
# Allow remote server configuration reports, with the URL of
# http//servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#

#
# Allow access to local system documentation from localhost
#
Alias /doc/ /usr/share/doc/

order deny,allow
deny from all
allow from localhost .localdomain
Options Indexes FollowSymLinks

#
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days. This bug involved a CGI script distributed as a part of
Apache.
# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org. Or, you can record them yourself, using
the script
# support/phf_abuse_log.cgi.
#
#
# Deny from all
# ErrorDocument 403 http//phf.apache.org/phf_abuse_log.cgi
#

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server
#
#
# ProxyRequests On

#
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#

#
# Enable/disable the handling of HTTP/1.1 "Via" headers.
# ("Full" adds the server version; "Block" removes all outgoing
Via headers)
# Set to one of Off | On | Full | Block
#
# ProxyVia On

#
# To enable the cache as well, edit and uncomment the following
lines
# (no caching without CacheRoot)
#
# CacheRoot "/var/cache/httpd"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com

#
# End of proxy directives.

### Section 3 Virtual Hosts
#
# VirtualHost If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them. Most
configurations
# use only name-based virtual hosts so the server doesn't need to
worry about
# IP addresses. This is indicated by the asterisks in the directives
below.
#
# Please see the documentation at

# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual
host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost 211.230.51.99

#
# VirtualHost example
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#

#
# Servername bioland.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#

#
#

#biolandltd.com

ServerName ns.biolandltd.com
DocumentRoot /home/bioland/public_html
# ServerAdmin id0077@yahoo.co.kr
# ErrorLog logs/bioland-error.log
# CustomLog logs/bioland-access.log common

www.biolandltd.com>
ServerName www.biolandltd.com
DocumentRoot /home/bioland/public_html
# ServerAdmin id0077@yahoo.co.kr
# ErrorLog logs/bioland-error.log
# CustomLog logs/bioland-access.log common
# ServerAlias www.biolandltd.com biolandltd.com

#
# VirtualHost example
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#

#
#

##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##

#
# Some MIME-types for downloading Certificates and CRLs
#

AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl

# Pass Phrase Dialog
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin

# Inter-Process Session Cache
# Configure the SSL Session Cache First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shmhtlogs/ssl_scache(512000)
#SSLSessionCache shmcblogs/ssl_scache(512000)
SSLSessionCache shmlogs/ssl_scache(512000)
SSLSessionCacheTimeout 300

# Semaphore
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
SSLMutex filelogs/ssl_mutex

# Pseudo Random Number Generator (PRNG)
# Configure one or more sources to seed the PRNG of the
# SSL library. The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough
entropy
# is available. This means you then cannot use the /dev/random
device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which
doesn't
# block. So, if available, use this one instead. Read the mod_ssl
User
# Manual for more details.
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file/dev/random 512
#SSLRandomSeed startup file/dev/urandom 512
#SSLRandomSeed connect file/dev/random 512
#SSLRandomSeed connect file/dev/urandom 512

# Logging
# The home of the dedicated SSL protocol logfile. Errors are
# additionally duplicated in the general error log file. Put
# this somewhere where it cannot be used for symlink attacks on
# a real server (i.e. somewhere where only root can write).
# Log levels are (ascending order higher ones include lower ones)
# none, error, warn, info, trace, debug.
SSLLog logs/ssl_engine_log
SSLLogLevel error

##
## SSL Virtual Host Context
##

# General setup for the virtual host
#DocumentRoot "/etc/httpd/htdocs"
#ServerName new.host.name
#ServerAdmin you@your.address
ErrorLog logs/error_log
TransferLog logs/access_log

# SSL Engine Switch
# Enable/Disable SSL for this virtual host.
SSLEngine on

# SSL Cipher Suite
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL!ADH!
EXPORT56RC4+RSA+HIGH+MEDIUM+LOW+SSLv2+EXP+eNULL

# Server Certificate
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt
#SSLCertificateFile /etc/httpd/conf/ssl.crt/server-dsa.crt

# Server Private Key
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key
#SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server-dsa.key

# Server Certificate Chain
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/httpd/conf/ssl.crt/ca.crt

# Certificate Authority (CA)
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/httpd/conf/ssl.crt
#SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt

# Certificate Revocation Lists (CRL)
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/httpd/conf/ssl.crl
#SSLCARevocationFile /etc/httpd/conf/ssl.crl/ca-bundle.crl

# Client Authentication (Type)
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10

# Access Control
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#

# SSL Engine Options
# Set various options for the SSL engine.
# o FakeBasicAuth
# Translate the client X.509 into a Basic Authorisation. This
means that
# the standard Auth/DBMAuth methods can be used for access
control. The
# user name is the `one line' version of the client's X.509
certificate.
# Note that no password is obtained from the user. Every entry
in the user
# file needs this password `xxj31ZMTZzkVA'.
# o ExportCertData
# This exports two additional environment variables
SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of
the
# server (always existing) and the client (only existing when
client
# authentication is used). This can be used to import the
certificates
# into CGI scripts.
# o StdEnvVars
# This exports the standard SSL/TLS related `SSL_*' environment
variables.
# Per default this exportation is switched off for performance
reasons,
# because the extraction step is an expensive operation and is
usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars
# This exports obsolete environment variables for backward
compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold
2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire
# This denies access when "SSLRequireSSL" or "SSLRequire"
applied even
# under a "Satisfy any" situation, i.e. when it applies access
is denied
# and no other module can change it.
# o OptRenegotiate
# This enables optimized SSL connection renegotiation handling
when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars
+StrictRequire

SSLOptions +StdEnvVars


SSLOptions +StdEnvVars

# SSL Protocol Adjustments
# The safe and default but still SSL/TLS standard compliant
shutdown
# approach is that mod_ssl sends the close notify alert but
doesn't wait for
# the close notify alert from client. When you need a different
shutdown
# approach you can use one of the following variables
# o ssl-unclean-shutdown
# This forces an unclean shutdown when the connection is closed,
i.e. no
# SSL close notify alert is send or allowed to received. This
violates
# the SSL/TLS standard but is needed for some brain-dead
browsers. Use
# this when you receive I/O errors because of the standard
approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown
# This forces an accurate shutdown when the connection is
closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close
notify
# alert of the client. This is 100% SSL/TLS standard compliant,
but in
# practice often causes hanging connections with brain-dead
browsers. Use
# this only for browsers where you know that their SSL
implementation
# works correctly.
# Notice Most problems of broken clients are also related to the
HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive"
for this.
# Similarly, one has to force some clients to use HTTP/1.0 to
workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-
1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0

# Per-Server Logging
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"