1. On a Sun Blade 1000, do not install in PCI Slot 1 (66MHz). Install only in Slot 2, 3, or 4 (33MHz).
On other systems, the board is supported in either 33MHz or 66MHz slots.
2. The board will run at 33MHz if installed in a 33MHz slot.
3. Use Multiview Cable 530-2927 or E450 Multiview Cable 530-2989.
4. On E450, each Expert3D requires Fan board 370-4272 in a lower, adjacent, slot.
5. On Sun Blade 1000/2000, if two Expert3D or Expert3D-Lite boards are installed, patch >=108576-08 is required.
6. On Sun Fire 6800, each Expert3D requires Fan board 370-4272 in an adjacent slot.
7. The Sun Fire 6800 requires Expert3D >=370-3987-04 and Patch >=108576-25.
1. On a Sun Blade 1000, do
1. On a Sun Blade 1000, do not install in PCI Slot 1 (66MHz). Install only in Slot 2, 3, or 4 (33MHz).
On other systems, the board is supported in either 33MHz or 66MHz slots.
2. The board will run at 33MHz if installed in a 33MHz slot.
3. Use Multiview Cable 530-2927 or E450 Multiview Cable 530-2989.
4. On E450, each Expert3D requires Fan board 370-4272 in a lower, adjacent, slot.
5. On Sun Blade 1000/2000, if two Expert3D or Expert3D-Lite boards are installed, patch >=108576-08 is required.
6. On Sun Fire 6800, each Expert3D requires Fan board 370-4272 in an adjacent slot.
7. The Sun Fire 6800 requires Expert3D >=370-3987-04 and Patch >=108576-25.
댓글 달기