젠투 사운드카드 문제입니다.(우분투사운드 환경 설정 올림)
글쓴이: jindol2k / 작성시간: 화, 2006/01/24 - 2:42오전
젠투에서 아무리 사운드카드 잡을려고 노력했는데 잘 안되서 우분투(우분투는 사운드 잘나옵니다.)를 설치했습니다.
우분투 사운드카드와 연관 되 있다고 생각되는 부분을 올립니다.
혹시 더 필요한 코드가 필요하시면 요청해주시기 바랍니다...
제가 아는 코드만 일단 올리겠습니다. 코드가 좀 많습니다. 양해부탁드립니다.
스크린샷은 그놈에서 멀티미디어 설정을 나타내는 화면입니다.
ALSA는 아닌거 같습니다만...
lspci
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a31 (rev 01) 0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 0000:00:07.0 PCI bridge: ATI Technologies Inc: Unknown device 5a39 0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 (rev 80) 0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 (rev 80) 0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 (rev 80) 0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 81) 0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376 (rev 80) 0000:00:14.2 0403: ATI Technologies Inc: Unknown device 437b (rev 01) 0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 (rev 80) 0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 (rev 80) 0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5a42 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4351 (rev 12) 0000:08:00.0 CardBus bridge: Texas Instruments: Unknown device 8031 0000:08:00.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 0000:08:00.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033 0000:08:00.4 0805: Texas Instruments: Unknown device 8034 0000:08:02.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
lspci -v
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a31 (rev 01)
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 64
0000:00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: d0000000-dfffffff
Capabilities: [b0] #0d [0000]
0000:00:07.0 PCI bridge: ATI Technologies Inc: Unknown device 5a39 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=07, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Capabilities: [50] Power Management version 3
Capabilities: [58] #10 [0041]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] #08 [a803]
0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374 (rev 80) (prog-if 10 [OHCI])
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375 (rev 80) (prog-if 10 [OHCI])
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at c0005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373 (rev 80) (prog-if 20 [EHCI])
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 81)
Subsystem: Unknown device 1854:0023
Flags: 66MHz, medium devsel
I/O ports at 8400 [size=16]
Memory at c0007000 (32-bit, non-prefetchable) [size=1K]
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376 (rev 80) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 16
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 8410 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
0000:00:14.2 0403: ATI Technologies Inc: Unknown device 437b (rev 01)
Subsystem: Unknown device 1854:0023
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at c0000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377 (rev 80)
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 0
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371 (rev 80) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=08, subordinate=0e, sec-latency=64
Memory behind bridge: c0300000-c03fffff
0000:01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5a42 (prog-if 00 [VGA])
Subsystem: Unknown device 1854:0023
Flags: bus master, 66MHz, medium devsel, latency 66, IRQ 11
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd.: Unknown device 4351 (rev 12)
Subsystem: Unknown device 1854:0023
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at c0200000 (64-bit, non-prefetchable) [size=16K]
I/O ports at a000 [size=256]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Capabilities: [e0] #10 [0011]
0000:08:00.0 CardBus bridge: Texas Instruments: Unknown device 8031
Subsystem: Unknown device 1854:0023
Flags: bus master, medium devsel, latency 168, IRQ 20
Memory at fedff000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=08, secondary=09, subordinate=0c, sec-latency=176
Memory window 1: 38000000-383ff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
0000:08:00.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8032 (prog-if 10 [OHCI])
Subsystem: Unknown device 1854:0023
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at c0309000 (32-bit, non-prefetchable) [size=2K]
Memory at c0300000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
0000:08:00.3 Unknown mass storage controller: Texas Instruments: Unknown device 8033
Subsystem: Unknown device 1854:0023
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0304000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
0000:08:00.4 0805: Texas Instruments: Unknown device 8034
Subsystem: Unknown device 1854:0023
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c030a000 (32-bit, non-prefetchable) [size=256]
Memory at c0309c00 (32-bit, non-prefetchable) [size=256]
Memory at c0309800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:08:02.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
Subsystem: Unknown device 18e8:6146
Flags: bus master, slow devsel, latency 64, IRQ 22
Memory at c0306000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
lsmod
Module Size Used by rfcomm 34972 0 l2cap 22404 5 rfcomm bluetooth 43012 4 rfcomm,l2cap speedstep_centrino 7380 0 cpufreq_userspace 4444 1 cpufreq_stats 5124 0 freq_table 4484 2 speedstep_centrino,cpufreq_stats cpufreq_powersave 1920 0 cpufreq_ondemand 5916 0 cpufreq_conservative 6820 0 pcmcia 24584 2 video 16004 0 tc1100_wmi 6916 0 sony_acpi 5516 0 pcc_acpi 11392 0 hotkey 9508 0 dev_acpi 11396 0 i2c_acpi_ec 5760 0 i2c_core 19728 1 i2c_acpi_ec button 6672 0 battery 9604 0 container 4608 0 ac 4996 0 ipv6 217408 6 af_packet 20232 2 pcspkr 3652 0 rtc 11832 0 rt2500 150372 0 ohci1394 30644 0 yenta_socket 22540 1 rsrc_nonstatic 12032 1 yenta_socket pcmcia_core 44932 3 pcmcia,yenta_socket,rsrc_nonstatic sk98lin 166872 1 snd_hda_intel 15872 1 snd_hda_codec 72064 1 snd_hda_intel snd_pcm_oss 46368 0 snd_mixer_oss 16128 1 snd_pcm_oss snd_pcm 78344 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_timer 21764 1 snd_pcm snd 48644 8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 9184 1 snd snd_page_alloc 10120 2 snd_hda_intel,snd_pcm shpchp 80612 0 pci_hotplug 24628 1 shpchp ati_agp 8716 0 agpgart 32328 1 ati_agp nls_cp437 5888 2 ntfs 92016 2 dm_mod 50364 1 joydev 9280 0 tsdev 7616 0 evdev 9088 1 sr_mod 15652 0 sbp2 21128 0 scsi_mod 124872 2 sr_mod,sbp2 ieee1394 90936 2 ohci1394,sbp2 psmouse 26116 0 mousedev 10912 1 parport_pc 31812 0 lp 11460 0 parport 32072 2 parport_pc,lp md 40656 0 ext3 115976 1 jbd 48536 1 ext3 thermal 13192 0 processor 23100 2 speedstep_centrino,thermal fan 4740 0 usbhid 30688 0 ehci_hcd 29448 0 ohci_hcd 18564 0 usbcore 104316 4 usbhid,ehci_hcd,ohci_hcd ide_cd 36996 0 cdrom 33952 2 sr_mod,ide_cd ide_disk 16128 5 ide_generic 1664 0 atiixp 5648 1 ide_core 125268 4 ide_cd,ide_disk,ide_generic,atiixp unix 24624 719 vesafb 8088 0 capability 5000 0 commoncap 6784 1 capability vga16fb 12232 1 vgastate 8320 1 vga16fb softcursor 2432 2 vesafb,vga16fb cfbimgblt 2944 2 vesafb,vga16fb cfbfillrect 3840 2 vesafb,vga16fb cfbcopyarea 4480 2 vesafb,vga16fb fbcon 34176 72 tileblit 2560 1 fbcon font 8448 1 fbcon bitblit 5248 1 fbcon
dmesg
Using IOAPIC for interrupt routing [4294669.803000] ACPI: PCI Root Bridge [PCI0] (0000:00) [4294669.803000] PCI: Probing PCI hardware (bus 00) [4294669.803000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 [4294669.804000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 [4294669.805000] Boot video device is 0000:01:05.0 [4294669.805000] PCI: Transparent bridge - 0000:00:14.4 [4294669.807000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [4294669.807000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [4294669.808000] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [4294669.809000] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [4294669.809000] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [4294669.809000] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [4294669.809000] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [4294669.810000] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [4294669.810000] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [4294669.810000] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [4294669.811000] burst-mode-ec-10-Aug [4294669.811000] ACPI: Embedded Controller [EC] (gpe 29) [4294669.912000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [4294669.912000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [4294669.913000] ACPI: Power Resource [CTHT] (off) [4294669.913000] Linux Plug and Play Support v0.97 (c) Adam Belay [4294669.913000] pnp: PnP ACPI init [4294669.914000] pnp: PnP ACPI: found 10 devices [4294669.914000] PnPBIOS: Disabled by ACPI PNP [4294669.914000] PCI: Using ACPI for IRQ routing [4294669.914000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [4294669.952000] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved [4294669.952000] pnp: 00:08: ioport range 0x40b-0x40b has been reserved [4294669.952000] pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved [4294669.952000] pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved [4294669.952000] pnp: 00:08: ioport range 0xc00-0xc01 has been reserved [4294669.952000] audit: initializing netlink socket (disabled) [4294669.952000] audit: initialized [4294669.952000] VFS: Disk quotas dquot_6.5.1 [4294669.952000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [4294669.952000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [4294669.952000] devfs: boot_options: 0x0 [4294669.952000] Initializing Cryptographic API [4294669.953000] PCI: 0000:00:07.0 has unsupported PM cap regs version (3) [4294669.953000] PCI: Setting latency timer of device 0000:00:07.0 to 64 [4294669.953000] pcie_portdrv_probe->Dev[5a39:1002] has invalid IRQ. Check vendor BIOS [4294669.953000] assign_interrupt_mode Found MSI capability [4294669.953000] Allocate Port Service[pcie00] [4294669.953000] Allocate Port Service[pcie01] [4294669.953000] Allocate Port Service[pcie03] [4294669.953000] isapnp: Scanning for PnP cards... [4294670.306000] isapnp: No Plug & Play device found [4294670.321000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [4294670.330000] i8042.c: Detected active multiplexing controller, rev 1.9. [4294670.335000] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [4294670.336000] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [4294670.336000] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [4294670.337000] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [4294670.338000] serio: i8042 KBD port at 0x60,0x64 irq 1 [4294670.338000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled [4294670.340000] io scheduler noop registered [4294670.340000] io scheduler anticipatory registered [4294670.340000] io scheduler deadline registered [4294670.340000] io scheduler cfq registered [4294670.340000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [4294670.346000] EISA: Probing bus 0 at eisa.0 [4294670.346000] Cannot allocate resource for EISA slot 1 [4294670.346000] Cannot allocate resource for EISA slot 8 [4294670.346000] EISA: Detected 0 cards. [4294670.346000] NET: Registered protocol family 2 [4294670.357000] IP: routing cache hash table of 8192 buckets, 64Kbytes [4294670.357000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [4294670.357000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [4294670.358000] TCP: Hash tables configured (established 131072 bind 65536) [4294670.358000] NET: Registered protocol family 8 [4294670.358000] NET: Registered protocol family 20 [4294670.358000] ACPI wakeup devices: [4294670.358000] LID0 PWRB PB7 LANC OHC1 OHC2 EHCI KBC0 P2P [4294670.358000] ACPI: (supports S0 S3 S4 S5) [4294670.358000] Freeing unused kernel memory: 224k freed [4294670.369000] vga16fb: initializing [4294670.369000] vga16fb: mapped to 0xc00a0000 [4294670.463000] Console: switching to colour frame buffer device 80x30 [4294670.463000] fb0: VGA16 VGA frame buffer device [4294670.575000] input: AT Translated Set 2 keyboard on isa0060/serio0 [4294671.583000] Capability LSM initialized [4294671.592000] NET: Registered protocol family 1 [4294671.602000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [4294671.602000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [4294671.602000] ACPI: bus type ide registered [4294671.607000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 [4294671.607000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [4294671.607000] ATIIXP: chipset revision 128 [4294671.607000] ATIIXP: not 100% native mode: will probe irqs later [4294671.607000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio [4294671.607000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio [4294671.607000] Probing IDE interface ide0... [4294671.871000] hda: FUJITSU MHV2060AT, ATA DISK drive [4294672.486000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [4294672.486000] Probing IDE interface ide1... [4294673.158000] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive [4294673.464000] ide1 at 0x170-0x177,0x376 on irq 15 [4294673.464000] Probing IDE interface ide2... [4294673.977000] Probing IDE interface ide3... [4294674.489000] Probing IDE interface ide4... [4294675.001000] Probing IDE interface ide5... [4294675.515000] hda: max request size: 128KiB [4294675.588000] hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [4294675.593000] hda: cache flushes supported [4294675.593000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 [4294675.628000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [4294675.628000] Uniform CD-ROM driver Revision: 3.20 [4294675.810000] Attempting manual resume [4294675.810000] swsusp: Suspend partition has wrong signature? [4294675.837000] usbcore: registered new driver usbfs [4294675.837000] usbcore: registered new driver hub [4294675.837000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [4294675.837000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 [4294675.837000] ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc) [4294676.169000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [4294676.169000] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0004000 [4294676.224000] hub 1-0:1.0: USB hub found [4294676.224000] hub 1-0:1.0: 4 ports detected [4294676.229000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 [4294676.229000] ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc) [4294676.558000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [4294676.558000] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0005000 [4294676.613000] hub 2-0:1.0: USB hub found [4294676.613000] hub 2-0:1.0: 4 ports detected [4294676.631000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 [4294676.631000] ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc) [4294676.631000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [4294676.631000] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0006000 [4294676.631000] ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 [4294676.631000] hub 3-0:1.0: USB hub found [4294676.631000] hub 3-0:1.0: 8 ports detected [4294677.080000] usb 2-1: new low speed USB device using ohci_hcd and address 2 [4294678.744000] usbcore: registered new driver hiddev [4294678.750000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.1-1 [4294678.750000] usbcore: registered new driver usbhid [4294678.750000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver [4294679.029000] ACPI: Fan [FAN0] (off) [4294679.031000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [4294679.031000] ACPI: Processor [CPU0] (supports 8 throttling states) [4294679.033000] ACPI: Thermal Zone [TZ1] (40 C) [4294679.290000] Attempting manual resume [4294679.290000] swsusp: Suspend partition has wrong signature? [4294679.310000] kjournald starting. Commit interval 5 seconds [4294679.310000] EXT3-fs: mounted filesystem with ordered data mode. [4294680.390000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [4294683.170000] Adding 1959920k swap on /dev/hda4. Priority:-1 extents:1 [4294683.394000] EXT3 FS on hda3, internal journal [4294690.317000] lp: driver loaded but no devices found [4294690.339000] mice: PS/2 mouse device common for all mice [4294690.371000] ieee1394: Initialized config rom entry `ip1394' [4294690.376000] SCSI subsystem initialized [4294690.380000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org> [4294690.974000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008 [4294690.977000] input: SynPS/2 Synaptics TouchPad on isa0060/serio2 [4294691.158000] ts: Compaq touchscreen protocol output [4294694.135000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [4294695.029000] hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } [4294695.029000] hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } [4294695.029000] ide: failed opcode was: unknown [4294695.031000] cdrom: open failed. [4294695.708000] NTFS driver 2.1.22 [Flags: R/O MODULE]. [4294695.748000] NTFS volume version 3.1. [4294695.791000] NTFS volume version 3.1. [4294697.147000] Linux agpgart interface v0.101 (c) Dave Jones [4294697.223000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [4294697.232000] shpchp: shpc_init : shpc_cap_offset == 0 [4294697.232000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [4294697.549000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [4294698.771000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [4294698.771000] sk98lin: Network Device Driver v8.23.1.3 [4294698.771000] (C)Copyright 1999-2005 Marvell(R). [4294698.771000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [4294698.771000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [4294698.841000] eth0: Marvell Yukon 88E8036 Fast Ethernet Controller [4294698.841000] PrefPort:A RlmtMode:Check Link State [4294698.908000] Linux Kernel Card Services [4294698.908000] options: [pci] [cardbus] [pm] [4294698.923000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 20 (level, low) -> IRQ 20 [4294698.923000] Yenta: CardBus bridge found at 0000:08:00.0 [1854:0023] [4294698.923000] yenta 0000:08:00.0: Preassigned resource 1 busy, reconfiguring... [4294698.923000] Yenta: Using INTVAL to route CSC interrupts to PCI [4294698.923000] Yenta: Routing CardBus interrupts to PCI [4294698.923000] Yenta TI: socket 0000:08:00.0, mfunc 0x01001002, devctl 0x64 [4294699.144000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 20 [4294699.144000] Socket status: 30000006 [4294699.238000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org> [4294699.238000] ACPI: PCI Interrupt 0000:08:00.2[A] -> GSI 20 (level, low) -> IRQ 20 [4294699.291000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0309000-c03097ff] Max Packet=[2048] [4294699.434000] ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 22 (level, low) -> IRQ 22 [4294699.434000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com [4294700.548000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e091040350930d][4294701.013000] Real Time Clock Driver v1.12 [4294701.065000] input: PC Speaker [4294702.485000] NET: Registered protocol family 17 [4294704.177000] eth0: network connection up using port A [4294704.177000] speed: 100 [4294704.177000] autonegotiation: yes [4294704.177000] duplex mode: full [4294704.177000] flowctrl: none [4294704.177000] irq moderation: disabled [4294704.177000] tcp offload: enabled [4294704.177000] scatter-gather: enabled [4294704.177000] tx-checksum: enabled [4294704.177000] rx-checksum: enabled [4294704.177000] rx-polling: enabled [4294708.548000] NET: Registered protocol family 10 [4294708.548000] Disabled Privacy Extensions on device c02eb280(lo) [4294708.548000] IPv6 over IPv4 tunneling driver [4294710.585000] ACPI: AC Adapter [AC] (on-line) [4294710.621000] ACPI: Battery Slot [CMB0] (battery present) [4294710.637000] ACPI: Power Button (FF) [PWRF] [4294710.637000] ACPI: Lid Switch [LID0] [4294710.637000] ACPI: Sleep Button (CM) [SLPB] [4294710.637000] ACPI: Power Button (CM) [PWRB] [4294710.718000] ibm_acpi: ec object not found [4294710.774000] wmi_add device=dff6f800 [4294710.774000] calling WQBA [4294710.815000] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [4294718.612000] apm: BIOS not found. [4294719.136000] cs: IO port probe 0x100-0x4ff: clean. [4294719.140000] cs: IO port probe 0xc00-0xcf7: excluding 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf [4294719.141000] cs: IO port probe 0xa00-0xaff: clean. [4294719.345000] eth0: no IPv6 routers present [4294719.947000] Bluetooth: Core ver 2.7 [4294719.947000] NET: Registered protocol family 31 [4294719.947000] Bluetooth: HCI device and connection manager initialized [4294719.947000] Bluetooth: HCI socket layer initialized [4294720.291000] Bluetooth: L2CAP ver 2.7 [4294720.291000] Bluetooth: L2CAP socket layer initialized [4294720.337000] Bluetooth: RFCOMM ver 1.5 [4294720.337000] Bluetooth: RFCOMM socket layer initialized [4294720.337000] Bluetooth: RFCOMM TTY layer initialized [4294767.840000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4294767.840000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. [4294767.924000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4294767.924000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. [4294768.007000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4294768.007000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. [4294768.101000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4294768.101000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. [4295152.377000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4295152.377000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. [4295152.462000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4295152.462000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known. [4295152.519000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4295152.519000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
modinfo soundcore
filename: /lib/modules/2.6.12-10-386/kernel/sound/soundcore.ko description: Core sound module author: Alan Cox license: GPL alias: char-major-14-* vermagic: 2.6.12-10-386 386 gcc-3.4 depends: srcversion: E11490DC3F523551C4C2A6D
cat /proc/asound/devices
17: [0- 1]: digital audio playback 25: [0- 1]: digital audio capture 16: [0- 0]: digital audio playback 24: [0- 0]: digital audio capture 0: [0- 0]: ctl 33: : timer
cat /proc/asound/modules0 snd_hda_intel
cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xc0000000 irq 16
cat /proc/asound/pcm
00-00: STAC92xx : STAC92xx : playback 1 : capture 2 00-01: STAC92xx Digital : STAC92xx Digital : playback 1 : capture 1
cat /proc/asound/timers
G0: system timer : 1000.000us (10000000 ticks) P0-0-0: PCM playback 0-0-0 : SLAVE P0-0-1: PCM capture 0-0-1 : SLAVE P0-0-3: PCM capture 0-0-3 : SLAVE P0-1-0: PCM playback 0-1-0 : SLAVE P0-1-1: PCM capture 0-1-1 : SLAVE
cat /proc/asound/versionAdvanced Linux Sound Architecture Driver Version 1.0.9 (Sun May 29 07:31:02 2005 UTC).
File attachments:
| 첨부 | 파일 크기 |
|---|---|
 1.png | 600.25 KB |
Forums:
snd_hda_intel 이 녀석 잘 되던데..커널에 다 때려 박아도
snd_hda_intel 이 녀석 잘 되던데..
커널에 다 때려 박아도 될 거고..
모듈로 하려면 다음과 같이 하면 됩니다.
emerge alsa-lib alsa-utils커널 설정은 다음과 같이 합니다.<M> Advanced Linux Sound Architecture <M> Sequencer support <M> OSS Mixer API <M> OSS PCM (digital audio) API [*] OSS Sequencer API PCI devices ---><M> Intel HD Audio새 커널을 올린 후에 /etc/modules.d/alsa 에 다음을 추가/etc/init.d/alsasound start이렇게 하면 모듈이 저절로 올라오고 사운드 시작됩니다. 처음에는 볼륨이 0 으로 되어 있으니 키워주세요. 부팅시 자동 시작:rc-update add alsasound default개인적으로 볼륨 조절은 aumix가 좋은 것 같네요.emerge aumixaumixrc-update add aumix default부팅할 때 unmute 어쩌고 하는 경고가 나온다면:alsactl store[quote="Anonymous"]snd_hda_intel 이 녀석 잘
가르쳐주시면 방법대로 했는데...에러가...ㅜㅜ 열심히 적어주셨는데...미안하네요...일단...부팅시에 나오는 에러를 올리겠습니다.
alsactl 실행시
alsactl : save_state : 1163 : No soundcards found...Step by Step one goes far.
해당 에러메시지는 검색해본 결과 모듈이 컴파일되지 않았거나 모듈이 올라가
해당 에러메시지는 검색해본 결과 모듈이 컴파일되지 않았거나 모듈이 올라가지
않았을때 발생하는 메시지라고 합니다.
일단 /lib/modules/커널버젼/kernel/ 아래 어느디렉토리에(저는 모듈이 아닌
커널에 포함시켜서 모듈이 생성안되어서 확인이 불가합니다. :)) snd_hda_intel.ko가 있는지
확인을 해보세요. 만일 없다면 해당 모듈이 생성되지 않았다는 뜻일 겁니다.
모듈이 없으면 다시한번 커널설정을 확인한 후에 컴파일과 모듈 컴파일을 해주시면
되겠죠. genkernel을 사용하면 자동으로 가능할겁니다.
만일 존재한다면 다음과 같이 해보세요.
위 kernel-2.6을 읽어보시면 알겠지만 booting시 올릴 모듈을 지정해주면 됩니다.
아~ 그리고 alsactl store는 모듈이 올라가 있는 상태에서 aumix등을 사용하여
mixer값을 지정한 후에 alsactl store를 해주어야 정상적으로 /etc/asound.state가
생성되는 것으로 알고 있습니다.
Gentoo를 사용하신다면 이것도 참조를 해보세요.
이번에 꼭 성공하시길 바랍니다.
------------------------------
좋은 하루 되세요.
[quote="codebank"]해당 에러메시지는 검색해본 결과 모듈이
매번 답변 정말 감사합니다...커널컴파일 다시 한번 해보고 오겠습니다...^^;
Step by Step one goes far.
드디어 사운드카드 잡은듯(?) 합니다...ㅜ.ㅜ모두 답변 감사합니다.
드디어 사운드카드 잡은듯(?) 합니다...ㅜ.ㅜ
모두 답변 감사합니다...여러분들 덕분에...ㅜ.ㅜ
구글에서 찾아보니 snd-hda-intel 모듈이 커널 2.6.12버젼까지는 모듈이 올라오지 않는 버그가 있다고 해서 2.6.15를 설치하니 사운드카드가 잡힌듯 합니다...확실한건 그놈깔아서 확인후 다시 말씀드리겠습니다...^^; 모두 감사드립니다^^
Step by Step one goes far.
댓글 달기