리눅스 초보의 엔비디아 그래픽 드라이버 설정 질문입니다.

주로 사용하는 프로그램이 마야라서 리눅스로 데스크 탑을 꾸미려고 하는 리눅스 생초보입니다. 제 시스템 사양은 아래와 같고요.

amd 64 3200과 엔비디아 지포스fx5700 그리고 페도라 코어3 64와
커널은 아래와 같습니다.

[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.10-1.741_FC3 #1 Thu Jan 13 16:35:56 EST 2005 x86_64 x86_64 x86_64 GNU/Linux

마야를 원활히 돌리기 위해서 그래픽 드라이버를 엔비디아 홈페이지에서 NVIDIA-Linux-x86_64-1.0-6629-pkg2.run 를 다운 받아서 /etc/inittab 열여서 id:5 - > id:3으로 수정후 재부팅 해서 텍스트 모드에서 아래와 같이 설치를 했는데요.

# sh NVIDIA-Linux-x86-64-1.0-6629-pkg2.run 설치시에는 아무문제 없이 잘되었는데, 중요한 etc/x11/xorg.conf 에서 어떻게 설정해야 할지를 잘 모르겠습니다.

나름대로 게시판 보면서 다른분들 셋팅을 따라해봐도 어디가 틀렸는지 재부팅만 하면 항상 설정창이 뜨면서 기본 값으로 돌아와버립니다.

초보를 위해 많이 귀찮으시더라도 넓은 아량으로 상세한 가르침을 부탁 드립니다. 여러분 모두 좋은 하루 되십시요.

# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 750(M)s(T)"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce FX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection