현재 위치

홈 ›› Forums ›› 공부 ›› 설치 및 활용 QnA

[질문]G450 듀얼 모니터 셋팅

embster의 이미지
글쓴이: embster / 작성시간: 월, 2005/01/10 - 3:26오후

matrox g450에 듀얼 모니터를 셋팅할려구 합니다. powerdesk를 이용해서 셋팅했지만 두 모니터에 똑같은 화면만 나오고 있습니다. 셋팅에서 틀린점이 있는지 조언 부탁드립니다..
작업환경은
OS :FC3
VGA ; AGP G450 듀얼
모니터 : Compaq 17인치, 로직스 17인치

xorg.conf 내용 올립니다.

Section "ServerLayout"
	Identifier     "Matrox PowerDesk configured."
	Screen         "Screen0" LeftOf "(null)"
	Screen         "Screen1" RightOf "Screen0"
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option         "Xinerama" "on"
	Option         "Clone" "on"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
EndSection

Section "ServerFlags"
	Option "Xinerama"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbModel" "pc105"
	Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option      "Protocol" "IMPS/2"
	Option      "Device" "/dev/input/mice"
	Option      "ZAxisMapping" "4 5"
	Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "COMPAQ V720"
	DisplaySize  320	240
	HorizSync    30.0 - 85.0
	VertRefresh  50.0 - 160.0
	Option       "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Logix"
	DisplaySize  320	240
	HorizSync    30.0 - 85.0
	VertRefresh  50.0 - 160.0
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "mga"
	VendorName  "Videocard vendor"
	BoardName   "Matrox Millennium G450"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "mga"
	VendorName  "Videocard Vendor"
	BoardName   "Matrox Millennium G450"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Depth     16
		Modes    "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "640x480" "1024x768"
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection
Forums: 
설치 및 활용 QnA
isakua의 이미지

글쓴이: isakua / 작성시간: 월, 2005/01/10 - 4:50오후

전 데뱐 쓰고 있습니다 G450 듀얼 (19, 17)입니다.

밑은 제 XF86Config-4 설정입니다..

# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86

Section "ServerLayout"
Identifier "Matrox PowerDesk configured."
Screen "Display 1" LeftOf "Display 2"
Screen "Display 2" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection

Section "Files"

# local font server
# if the local font server has problems, we can fall back on these
FontPath "unix/:7100"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection

Section "ServerFlags"
Option "Xinerama"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Display 1"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 150.0
ModeLine "1280x1024@85Hz:0" 156.0 1280 1344 1504 1712 1024 1025 1028 1072 +hsync +vsync
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Display 2"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 120.0
ModeLine "1280x1024@75Hz:1" 133.4 1280 1296 1440 1672 1024 1025 1028 1064 +hsync +vsync
ModeLine "1280x1024@75Hz:1(1)" 137.9 1280 1296 1440 1712 1024 1033 1036 1074 +hsync +vsync
ModeLine "1280x1024@75Hz:1(2)" 136.1 1280 1296 1440 1704 1024 1034 1037 1065 +hsync +vsync
ModeLine "1280x1024@75Hz:1(3)" 135.0 1280 1288 1432 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024@75Hz:1(4)" 135.0 1280 1288 1432 1688 1024 1031 1034 1066 +hsync +vsync
ModeLine "1280x1024@75Hz:1(5)" 135.0 1280 1288 1432 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024@75Hz:1(6)" 136.7 1280 1296 1440 1712 1024 1025 1028 1064 +hsync +vsync
ModeLine "1280x1024@75Hz:1(7)" 134.6 1280 1288 1432 1688 1024 1025 1028 1063 +hsync +vsync
ModeLine "1280x1024@75Hz:1(8)" 135.0 1280 1288 1432 1688 1024 1025 1028 1066 +hsync +vsync
EndSection

Section "Monitor"
Identifier "Display Merged"
HorizSync 30.0 - 95.0
VertRefresh 50.0 - 150.0
EndSection

Section "Device"
Identifier "MATROX CARD 1"
Driver "mga"
VideoRam 32768
Option "hw cursor" "on"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "MATROX CARD 2"
Driver "mga"
VideoRam 32768
Option "hw cursor" "on"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Display 1"
Device "MATROX CARD 1"
Monitor "Display 1"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection

Section "Screen"
Identifier "Display 2"
Device "MATROX CARD 2"
Monitor "Display 2"
DefaultDepth 16
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
EndSection

Section "Screen"
Identifier "Display Merged"
Device "MATROX CARD 1"
Monitor "Display Merged"
DefaultDepth 24
Option "Monitor2Position" "RightOf"
Option "MetaModes" "1280x1024-640x480 "
Option "Monitor2HSync" "30.0-95.0 "
Option "Monitor2VRefresh" "50.0-150.0 "
Option "MergedFB"
SubSection "Display"
Virtual 1920 1024
Depth 24
Modes "1280x1024" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

세상에 내 맘 대로 되는건 없다
세상은 노력하는 자만이 성공할수 있다.

아님 말고

embster의 이미지

글쓴이: embster / 작성시간: 월, 2005/01/10 - 5:22오후

감사합니다.. 잘 됐습니다. 약간 수정이 됐지만. 참고하여 잘 수정하였습니다.

수정된 설정은

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen0" LeftOf "Screen1"
	Screen      1  "Screen1" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "on"
	Option	    "Clone" "off"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "COMPAQ V720"
	DisplaySize  320	240
	HorizSync    30.0 - 85.0
	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Monitor"
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor 1024x768"
	HorizSync    31.5 - 57.0
	VertRefresh  50.0 - 70.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "mga"
	VendorName  "Videocard vendor"
	BoardName   "Matrox Millennium G450"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "mga"
	VendorName  "Videocard Vendor"
	BoardName   "Matrox Millennium G450"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     16
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes    "1024x768"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection

젊음의 도전은 때로는 무모해야한다.

댓글 달기

텍스트 포맷에 대한 자세한 정보

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.