startx 에서 문제발생입니다.

genius93의 이미지

startx 를 했는데..첨부터 문제가 마구 쏟아지더라구요..
그래서 대강 문제를 해결해 나가는데...
결국은 GUI 가 떴씁니다.
그런데.... 제가 생각하던 그런 x-window 화면이 아니고....
회색 짜임무니 바탕화면에 xterm 화면이 세개 그리고 xclock 화면이 한개
이렇게 뜨고 끝이더군요.... 음..이렇게 뜨는게 맞는지요...
아래는 startx 했을시의 에러 메세지 입니다.

[root@localhost drivers]# startx
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority

XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.2.16 i686 [ELF]
Build Date: 07 March 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Nov 15 18:19:29 2003
(==) Using config file: "/etc/X11/XF86Config"
Symbol vbeFree from module /usr/X11R6/lib/modules/drivers/i740_drv.o is unresolved!
Warning: Cannot convert string "" to type XftFont

어떻게 해야 할지요...제가 뜬 GUI 화면은 캡쳐해서 보여드리면 속시원하겠지만... 이게 캡쳐가 불가능 할거 같아서리....

그리고 ..아래는 XF86Config 의 내용입니다.
에궁...하루종일 이거만 들여다보구 있어도 머르겠네염..
감사합니다.

# File generated by anaconda.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/ssc"
FontPath "/usr/X11R6/lib/X11/fonts/ssc-ttf"
FontPath "/usr/sharefonts/default/TrueType"
FontPath "/usr/sharefonts/default/Type1"
FontPath "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# NoTrapSignals

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# DontZap

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# DontZoom
EndSection

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"
Protocol "Standard"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"

AutoRepeat 500 5

# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
# ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock:

#LeftAlt Meta
# LeftAlt ModeShift
#RightAlt Meta
#ScrollLock Compose
#RightCtl Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:nocaps"
XkbRules "xfree86"
XkbModel "pc101"
XkbLayout "en_US"
EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
Protocol "PS/2"
Device "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Emulate3Buttons
Emulate3Timeout 50

# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle

EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 31.5
VertRefresh 60
ModeLine "640x480" 25.175 640 664 760 800
480 491 493 525
EndSection

Section "Monitor"

Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "Unknown"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 60

# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# --320x200--
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400
200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400
240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400
240 244 246 262 Doublescan
# --400x300--
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512
300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528
300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520
300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616
300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632
300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632
300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624
300 319 322 333 Doublescan

# Normal video modes

# -- 512x384
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640
384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640
384 385 388 404 -HSync -VSync

# -- 640x400 --
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800
400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832
400 401 404 445 -HSync +VSync

# --- 640x480 ---
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800
480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864
480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840
480 481 484 500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832
480 481 484 509 -HSync -VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864
480 488 494 530 -HSync -VSync

# --- 800x600 ---
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024
600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056
600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040
600 637 643 666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088
600 616 621 657 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088
600 604 610 640 -HSync -VSync

# --- 1024x768 ---
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344
768 771 777 806 -hsync -vsync
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264
768 776 784 817 Interlace
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328
768 771 777 806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360
768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408
768 782 788 822 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440
768 771 781 802 -HSync -VSync

# --- 1152x864 ---
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680
864 868 876 892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474
864 865 875 895
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552
864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776
864 864 876 908
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480
864 865 875 985 Interlace
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536
864 866 885 902 -HSync -VSync

# -- 1280x1024 --
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712
1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696
1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712
1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664
1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728
1024 1025 1028 1072 +HSync +VSync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568
1024 1025 1037 1165 Interlace
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696
1024 1031 1046 1072 -HSync -VSync

# -- 1600x1200 --
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160
1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160
1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160
1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080
1200 1204 1207 1244 +HSync +VSync

# -- 1800x1400 --

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392
1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392
1440 1441 1444 1490 +HSync +VSync

# -- 1920x1200 --

# 1920x1200 @ 70Hz, 87.50 KHz hsync
Modeline "1920x1200" 230 1920 1936 2096 2528
1200 1201 1204 1250 +HSync +VSync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

#Section "Device"
# Identifier "Generic VGA Card"
# Driver "vga"
# VendorName "Unknown"
# BoardName "Unknown"
# Chipset "generic"
#EndSection

Section "Device"
Identifier "Intel 740 (generic)"
Driver "i740"
VendorName "Intel740 Super VGA"
#Option "no_accel"
#Option "sw_cursor"
#Option "hw_cursor"
#Option "sgram"
#Option "sdram"
VideoRam 8192
EndSection

# **********************************************************************
# Screen section
# **********************************************************************

# The kernel framebuffer server
#Section "Screen"
# Driver "fbdev"
# Device "Generic VGA Card"
# Monitor "Generic Monitor"
# Subsection "Display"
## Depth 16
# Modes "default"
# EndSubsection
#EndSection

# The 16-color VGA server
#Section "Screen"
# Driver "vga16"
# Device "Generic VGA Card"
# Monitor "Generic Monitor"
# Subsection "Display"
# Modes "640x480" "800x600"
# ViewPort 0 0
# EndSubsection
#EndSection

# The Mono server
#Section "Screen"
# Driver "vga2"
# Device "Generic VGA Card"
# Monitor "Generic Monitor"
# Subsection "Display"
# Modes "640x480" "800x600"
# ViewPort 0 0
# EndSubsection
#EndSection

# The svga server
#Section "Screen"
# Driver "svga"
# Device "Intel 740 (generic)"
# Monitor "Generic Monitor"

# Subsection "Display"
# Depth 16
# Modes "800x600"
# ViewPort 0 0
# EndSubsection

# Subsection "Display"
# Depth 8
# Modes "800x600"
# ViewPort 0 0
# EndSubsection

# Subsection "Display"
# Depth 32
# Modes "800x600"
# ViewPort 0 0
# EndSubsection
#EndSection

# The accel server
Section "Screen"
Driver "accel"
Device "Intel 740 (generic)"
Monitor "Generic Monitor"

Subsection "Display"
Depth 16
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection

Subsection "Display"
Depth 8
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection

# Subsection "Display"
# Depth 32
# Modes "640x480" "800x600"
# ViewPort 0 0
# EndSubsection
EndSection

버려진의 이미지

윈도 매니저는 무엇을 사용하시나요?

genius93의 이미지

윈도매니저라 하시면..?? 예를 들어 어떤걸 말씀하시는지요?? 제가 잘몰라서요....

버려진의 이미지

gnome이라던지 kde, blackbox,,, 와 같은..

genius93의 이미지

글세요..잘.. ^^a
제가 첨에 리눅스 깔때 서버설치를 이용했는데요..
allix Linux6.2 beta 배포판을 설치 했구요...
어떻게 알수 있을까요..윈도매니저...

ixevexi의 이미지

아마도 윈도메니저의 문제일듯 합니다
왜냐면 xterm이 3개뜨고.. 어쩌고 저쩌고 하는것은
설정파일이 없을때 읽는 기본 파일이거든요...
아마 이 파일이 /usr/lib/X11/xinit/xinitrc 일겁니다.

홈디렉토리의 .xinitrc를 저 위의 파일을 참조해서
.xinitrc의 가장 마지막줄의 exec fvwm2
를 exec startkde
로 바꾸어 보세요

저도 초보이기 때문에 장담할 수 없습니다 ㅠ.ㅜ

C++, 그리고 C++....
죽어도 C++

맹고이의 이미지

제가 보기엔 x-window는 잘뜨고 있는거 같은데요...

문제(?)는 윈도우 매니저가 twm인가 하는

아주 쌈박한 기본 윈도우 매니저라서 실망하신 듯 합니다.

이제 gnome, kde 등등 취향에 맞는 윈도우 매니저를 설치해 보셔야겠죠... 8)

genius93의 이미지

많은 답변 감사드립니다...
그렇다면...제가 gnome 이나 kde 를 설치 하려면 어떻게 해야 할지요?
물론 여기서 모든 답변을 구할수는 없지만
어디에서 어떤걸 다운받아서...어떤 메뉴얼을 이용해서..하면 된다..
정도의 답변이라도...부탁드립니다.
감사합니다.

hys545의 이미지

genius93 wrote:
많은 답변 감사드립니다...
그렇다면...제가 gnome 이나 kde 를 설치 하려면 어떻게 해야 할지요?
물론 여기서 모든 답변을 구할수는 없지만
어디에서 어떤걸 다운받아서...어떤 메뉴얼을 이용해서..하면 된다..
정도의 답변이라도...부탁드립니다.
감사합니다.

배포판 시디 보면 gnome.kde 자가 들어가는 rpm이 있습니다'그 거 다 꺼세여
그리고 왠만하면 설치할때 선택하느느게 간단

즐린

신원호의 이미지

그냥, 다시 까시지...ㅎ ㅎㅎ

댓글 달기

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.