[질문]imac powerpc 333 에 gentoo linux XFree86 셋팅 성공하신
글쓴이: johnny92 / 작성시간: 금, 2003/10/31 - 2:04오후
gentoo 리눅스 설치다잘되고 정상 작동 합니다.
그래서 XFree86 설치 했는데
startx 하면 화면이 먹통입니다.
alt+ctl+del 누르면 빠져나오기는 하는거봐서
아마도 모니터설정이 잘못된거같은데 apple 싸이트에서도 하드웨어 스팩이 정확하게 안나오거든요
셋팅성공한신분은 XF86Config 파일올려주시면 감사하겠습니다.
Forums:
제 XF86Config 입니다. (imac , gentoo)
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/ms-gulim/"
FontPath "/usr/X11R6/lib/X11/fonts/ms-batang/"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk-2.1/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "speedo"
Load "type1"
Load "xtt"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
UseModes "Modes0"
HorizSync 58-62
VertRefresh 50-130
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Option "UseFBDev"
Driver "ati"
VendorName "ATI"
BoardName "3D Rage Pro 215GP"
ChipSet "ati"
ChipId 0x4750
ChipRev 0x5c
BusID "PCI:0:18:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Modes"
Identifier "Modes0"
# mode generated by Xeasyconf
Modeline "1024x768" 78.52 1024 1048 1144 1312 768 769 772 792
+HSync +VSync
EndSection
놀라워라 잘되는군요.. 감격했어요... 4일동안고생의 보람이..
염치없지만 이부분에 대한 설명좀해주시면 안될까요??
아님 어디메뉴얼이나 참고할만한 문서라두 소개시켜주시면 감사하겠습니다.
Section "Modes"
Identifier "Modes0"
# mode generated by Xeasyconf
Modeline "1024x768" 78.52 1024 1048 1144 1312 768 769 772 792
+HSync +VSync
EndSection
man XF86Config;;http://xfree86.o
man XF86Config
;;
http://xfree86.org
그거는 말이죠..
위에 모니터섹션에서.. 설정한 modes(해상도죠)에서..
지정해준 해상도에서의 수직 주파수 값을설정하기 위한거에요 :)
오랫동안 꿈을 그리는 사람은 그 꿈을 닮아간다...
http://mytears.org ~(~_~)~
나 한줄기 바람처럼..
댓글 달기