VirtualBox에서 compiz 실행하기

gurumong의 이미지

환경은 아래와 같습니다
VirtualBox 3.1.2 r56127
guestOS: Slackware 13
xorg server 1.6.3

게스트확장을 설치하고 난뒤 xorg로그에서 아래와 같은 에러가 있어서 링크를 만들어주었습니다
(EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/vboxvideo_dri.so failed (/usr/lib/xorg/modules/dri/vboxvideo_dri.so: cannot open shared object file: No such file or directory)
ln -s /usr/lib/VBoxOGL.so /usr/lib/xorg/modules/dri/vboxvideo_dri.so
ln -s /usr/lib/xorg/modules/dri /usr/lib/dri

startx로 실행을 하고 compiz --replace로 실행을 해보았는데요
마치 윈도우매니저가 없는것처럼 창틀이 사라지고 창을 이동시킬수 없게 되고
윈도우+e, alt+방향키등 명령어들은 듣질 않네요 ㅜ.ㅜ
무엇이 문제일까요? ㅜ.ㅜ

//compiz 실행 메세지

bash-3.1$ compiz --replace
OpenGL Warning: No pincher, please call crStateSetCurrentPointers() in your SPU
OpenGL Info: Using XSHM for GLX_EXT_texture_from_pixmap

//compiz-check 실행 결과

bash-3.1$ ./compiz-check 
 
Gathering information about your system...
 
 Distribution:          Slackware 13.0.0.0.0 
 Desktop environment:   KDE4
 Graphics chip:         InnoTek Systemberatung GmbH VirtualBox Graphics Adapter
 Driver in use:         vboxvideo
 Rendering method:      AIGLX
 
Checking if it's possible to run Compiz on your system...
 
 Checking for texture_from_pixmap...               [FAIL]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...               [ OK ]
 Checking for FBConfig...                          [FAIL]
 Checking for hardware/setup problems...           [SKIP]
 
At least one check had to be skipped:
 Error: Unable to detect maximum 3D texture size 

//xorg.conf파일

bash-3.1$ cat /etc/X11/xorg.conf
# VirtualBox generated configuration file
# based on /etc/X11/xorg.conf.
 
Section "Monitor"
  Identifier   "Monitor[0]"
  ModelName    "VirtualBox Virtual Output"
  VendorName   "Sun Microsystems Inc"
EndSection
 
Section "Device"
  BoardName    "VirtualBox Graphics"
  Driver       "vboxvideo"
  Identifier   "Device[0]"
  VendorName   "Sun Microsystems Inc"
EndSection
 
Section "Screen"
  SubSection "Display"
    Depth      24
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection
 
Section "Extensions"
  Option "Composite" "Enable"
EndSection

//xorg 버전

bash-3.1$ ls /var/log/packages | grep xorg
xorg-cf-files-1.0.2-noarch-3
xorg-docs-1.4-noarch-2
xorg-server-1.6.3-i486-1
xorg-server-xephyr-1.6.3-i486-1
xorg-server-xnest-1.6.3-i486-1
xorg-server-xvfb-1.6.3-i486-1
xorg-sgml-doctools-1.2-noarch-2

//xorg Log

bash-3.1$ cat /var/log/Xorg.0.log
 
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.0 Slackware Linux Project
Current Operating System: Linux localhost 2.6.29.6-smp #2 SMP Mon Aug 17 00:52:54 CDT 2009 i686
Build Date: 03 August 2009  06:51:50PM
 
	Before reporting problems, check <a href="http://wiki.x.org" rel="nofollow">http://wiki.x.org</a>
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 26 10:12:10 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Screen[0]" (0)
(**) |   |-->Monitor "Monitor[0]"
(**) |   |-->Device "Device[0]"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/75dpi/:unscaled,
	/usr/share/fonts/100dpi/:unscaled,
	/usr/share/fonts/75dpi,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/cyrillic,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1de0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
 
(--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vboxvideo"
(II) Loading /usr/lib/xorg/modules/drivers//vboxvideo_drv.so
(II) Module vboxvideo: vendor="Sun Microsystems, Inc."
	compiled for 1.5.99.901, module version = 1.0.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(**) Load address of symbol "VBOXVIDEO" is 0xb79dd5a0
(II) VBoxVideo: guest driver for VirtualBox: vbox
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) VBoxVideo(0): VirtualBox guest additions video driver version 3.1.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) VBoxVideo(0): initializing int10
(II) VBoxVideo(0): Primary V_BIOS segment is: 0xc000
(II) VBoxVideo(0): VESA BIOS detected
(II) VBoxVideo(0): VESA VBE Version 2.0
(II) VBoxVideo(0): VESA VBE Total Mem: 65536 kB
(II) VBoxVideo(0): VESA VBE OEM: VirtualBox VBE BIOS <a href="http://www.virtualbox.org/
" rel="nofollow">http://www.virtualbox.org/
</a>(II) VBoxVideo(0): VESA VBE OEM Software Rev: 0.2
(II) VBoxVideo(0): VESA VBE OEM Vendor: Sun Microsystems, Inc.
(II) VBoxVideo(0): VESA VBE OEM Product: VirtualBox VBE Adapter
(II) VBoxVideo(0): VESA VBE OEM Product Rev: Sun VirtualBox Version 3.1.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
(II) VBoxVideo(0): Output VBOX1 using monitor section Monitor[0]
(II) VBoxVideo(0): Output VBOX1 has no monitor section
(II) VBoxVideo(0): Output VBOX1 connected
(II) VBoxVideo(0): Using exact sizes for initial modes
(II) VBoxVideo(0): Output VBOX1 using initial mode 736x535
(==) VBoxVideo(0): RGB weight 888
(==) VBoxVideo(0): Default visual is TrueColor
(==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VBoxVideo(0): DPI set to (96, 96)
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) VBoxVideo(0): Default visual is TrueColor
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
(II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
(II) VBoxVideo(0): [drm] added 1 reserved context for kernel
(II) VBoxVideo(0): X context handle = 0x1
(II) VBoxVideo(0): [drm] installed DRM signal handler
(II) VBoxVideo(0): visual configurations initialized
(==) VBoxVideo(0): Backing store disabled
(II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) VBoxVideo(0): DPMS enabled
(II) VBoxVideo(0): The VBox video extensions are now enabled.
(II) VBoxVideo(0): [DRI] installation complete
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
(II) The file referenced, is *NOT* loaded
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(EE) AIGLX error: vboxvideo does not export required DRI extension
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) VBoxVideo(0): Setting screen physical size to 194 x 141
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 2.2.5
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
(II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device VirtualBox Guest Service
(II) LoadModule: "vboxmouse"
(II) Loading /usr/lib/xorg/modules/input//vboxmouse_drv.so
(II) Module vboxmouse: vendor="Sun Microsystems Inc."
	compiled for 0.0.0, module version = 1.0.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) Load address of symbol "VBOXMOUSE" is 0xb3347c00
(**) VirtualBox Guest Service: always reports core events
(**) VirtualBox Guest Service: Device: "/dev/vboxguest"
(II) XINPUT: Adding extended input device "VirtualBox Guest Service" (type: MOUSE)
(**) VirtualBox Guest Service: (accel) keeping acceleration scheme 1
(**) VirtualBox Guest Service: (accel) filter chain progression: 2.00
(**) VirtualBox Guest Service: (accel) filter stage 0: 20.00 ms
(**) VirtualBox Guest Service: (accel) set acceleration profile 0
(II) VirtualBox Guest Service: On.
winner의 이미지

저는 Windows Vista Ultimate 64bit Host에 Ubuntu 9.10 64bit Desktop Guest를 사용 중이지만 compiz 잘 됩니다. 전에 flash가 잘 안되었었는데, flash도 잘 되더군요.

gurumong의 이미지

아 host OS는 Windows XP Professional SP3 사용중입니다 ㅜ.ㅜ
compiz-check에서 fail 나는게 두개가 있는데
아무래도 추가적인 설정이 필요해서 그런걸까요?

7339989b62a014c4ce6e31b3540bc7b5f06455024f22753f6235c935e8e5의 이미지

compiz는 창 데코레이터를 같이 띄워야 창 테두리를 볼 수가 있게 돼있습니다.
gtk-window-decorator를 실행해보세요.

---8< 서명 -----------------
애니메이션 감상 기록 http://animeta.net/

댓글 달기

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.