SMP8654 보드 이용하여 MPLAYER 작동하기 위하여.. DIRECTFB 에러..
MPlayer 1.0rc2-4.3.2 (C) 2000-2007 MPlayer Team
CPU: SGI MIPS
Playing /tango/avi/0.asf.
ASF file format detected.
[asfheader] Audio stream found, -aid 1
[asfheader] Video stream found, -vid 2
VIDEO: [MP43] 320x240 24bpp 1000.000 fps 0.0 kbps ( 0.0 kbyte/s)
DirectFB: Preinit entered
(*) DirectFB/Config: Active DTV standard hdtv60
(*) DirectFB/Config: Active DTV signal edid
(*) DirectFB/Config: Active DTV connector hdmi
(*) DirectFB/Config: Active Component standard hdtv60
(*) DirectFB/Config: Active Component signal 1080i
(*) DirectFB/Config: Active DTV connector ycrcb
(*) DirectFB/Config: Active Analog standard ntsc
(*) DirectFB/Config: Active Analog signal ntsc
(*) DirectFB/Config: Active Analog connector cvbs
(*) DirectFB/Config: Driver options file /tango/sdk/dcchd//sigmadfbrc
(*) DirectFB/Config: Active DTV standard hdtv60
(*) DirectFB/Config: Active DTV signal 1080i
(*) DirectFB/Config: Active DTV connector hdmi
(*) DirectFB/Config: Active Component standard hdtv60
(*) DirectFB/Config: Active Component signal 1080i
(*) DirectFB/Config: Active DTV connector ycrcb
(*) DirectFB/Config: Active Analog standard ntsc
(*) DirectFB/Config: Active Analog signal ntsir: Enable NEC decoder (0x00000000)
c
(*) DirectFB/ir: Enable RC5 decoder (0x00000000)
Config: Active Air: Enable RC6 decoder
nalog connector cvbs
(*) DirectFB/Config: Driver options file /tango/sdk/dcchd//sigmadfbrc
(!) DirectFB/Config: Unable to open config file `/root/.directfbrc'!
=======================| DirectFB 1.0.0 |=======================
(c) 2001-2007 The DirectFB Organization (directfb.org)
(c) 2000-2004 Convergence (integrated media) GmbH
------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2009-07-06@20:27-KST)
SYSTEM:ERROR:RUA splash screen clean up error 9
(!) System initialised
(*) Direct/Thread: Running 'EM86 Input' (INPUT, 762)...
(*) DirectFB/Input: EM86xx remote control 1.0 (SigmaDesigns)
(*) Direct/Thread: Running 'EM86 TCP Input' (INPUT, 763)...
(*) DirectFB/Input: EM86xx remote control over TCP/ 0.1 (SigmaDesigns)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 764)...
(*) DirectFB/Input: USB Optical Mouse 0.1 (directfb.org)
****************************************************************************
* *
* WARNING WARNING WARNING *
* *
* DCCHD logging is disabled! *
* To enable it define ENABLE_DEV_SUPPORT in the environment. *
* *
****************************************************************************
(!) Driver getting globals=0xb84838
(*) DirectFB/Graphics: SMP863x Software Rasterizer 0.1 (Sigma Designs)
(!) SMP863x: Error: could not open persistent HDCP SRM file: /mnt/sigma/hdcp.srm
(*) Display params: -no_cp -component -f 1080i59 -cs yuv_709 -asp 16 9 -analog9
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Paramet!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Paramet!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
(*) SMP863x: HDMI Checker Thread running (pid=759)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
OSD:ERROR:unsupported format: 0x200801
(!) DirectFB/DirectFBCreate: Setting desktop format failed!
-> Using default format.
DirectFB: Keyboard init FAILED
DirectFB: Preinit OK
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 16000 Hz, 2 ch, s16le, 16.0 kbit/3.13% (ratio: 2004->64000)
Selected audio codec: [ffwmav2] afm: ffmpeg (DivX audio v2 (FFmpeg))
==========================================================================
AO: [null] 16000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12)
DirectFB: Format query: Planar YV12
(*)
HH HH HHHHH HH HH HHHH HHHH HH HH
HH HH HH HH HHH HHH HH HH HH HHH HH
HHHHHH HH HH HH H HH HH HH HH HH H HH
HH HH HH HH HH HH HH HH HH HH HHH
HH HH HHHHH HH HH HHHH HHHH HH HH
(!) SMP863x: em86_add_video_mode: Trying to add an unsupported video mode 67; ig
(!) SMP863x: First DTD does not match a HDMI TVStandard, skipping! (This is not)
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Paramet!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Paramet!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
(!!!) *** WARNING [SMP863x: em86_get_HDMI_active_format_and_aspect: Parameter!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1720 in em86_get_HDMI_active_format_and]
(*) Display params: -no_cp -digital -hdmi_spd SDesigns BluRay_SMP8654 -f HDMI_9
OSD:ERROR:unsupported format: 0x810060a
(!) SMP863x: em86_add_video_mode: Trying to add an unsupported video mode 67; ig
(!) SMP863x: First DTD does not match a HDMI TVStandard, skipping! (This is not)
(*) SMP863x: em86_configure_encoders: HDMI changed; presentation engine will ree
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Paramet!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect: Paramet!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in em86_get_analog_active_format()]
(!!!) *** WARNING [SMP863x: em86_get_HDMI_active_format_and_aspect: Parameter!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1720 in em86_get_HDMI_active_format_and]
DirectFB: Test format - layer 0 scale/pos 0
DirectFB: Test format - layer 1 scale/pos 0
DirectFB: Test format - layer 2 scale/pos 8
DirectFB: Test format - layer 3 scale/pos 8
DirectFB: Test format - added layer 3 scale/pos 8
DirectFB: Test format - layer 4 scale/pos 8
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [directfb] 320x240 => 320x240 Planar YV12
DirectFB: Format query: Planar YV12
OSD:ERROR:unsupported format: 0x810060a
DirectFB: Test format - layer 0 scale/pos 0
DirectFB: Test format - layer 1 scale/pos 0
DirectFB: Test format - layer 2 scale/pos 8
DirectFB: Test format - layer 3 scale/pos 8
DirectFB: Test format - added layer 3 scale/pos 8
DirectFB: Test format - layer 4 scale/pos 8
DirectFB: Config entered [320x240]
DirectFB: With requested format: Planar YV12
(!!!) *** WARNING [letting unprivileged IDirectFBDisplayLayer::GetSurface() c]
DirectFB: Config - looking for suitable layer
OSD:ERROR:unsupported format: 0x810060a
DirectFB: Test format - layer 0 scale/pos 0
DirectFB: Test format - layer 1 scale/pos 0
DirectFB: Test format - layer 2 scale/pos 8
DirectFB: Test format - layer 3 scale/pos 8
DirectFB: Test format - added layer 3 scale/pos 8
DirectFB: Test format - layer 4 scale/pos 8
DirectFB: Config - layer 3
DirectFB: Config - switching layer to exclusive mode
DirectFB: Config - changing layer configuration (size)
DirectFB: Layer reports format:200808
DirectFB: Desired pixelformat: 810060a
DirectFB: Config - changing layer configuration (format)
DirectFB: Double buffering is active
DirectFB: Requested field parity: Don't care
DirectFB: ConfigError - could not get surface
FATAL: Cannot initialize video driver.
VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12)
DirectFB: Format query: Planar YV12
OSD:ERROR:unsupported format: 0x810060a
DirectFB: Test format - layer 0 scale/pos 0
DirectFB: Test format - layer 1 scale/pos 0
DirectFB: Test format - layer 2 scale/pos 8
DirectFB: Test format - layer 3 scale/pos 8
DirectFB: Test format - added layer 3 scale/pos 8
DirectFB: Test format - layer 4 scale/pos 8
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
VO: [directfb] 320x240 => 320x240 Planar YV12
DirectFB: Format query: Planar YV12
OSD:ERROR:unsupported format: 0x810060a
DirectFB: Test format - layer 0 scale/pos 0
DirectFB: Test format - layer 1 scale/pos 0
DirectFB: Test format - layer 2 scale/pos 8
DirectFB: Test format - layer 3 scale/pos 8
DirectFB: Test format - added layer 3 scale/pos 8
DirectFB: Test format - layer 4 scale/pos 8
DirectFB: Config entered [320x240]
DirectFB: With requested format: Planar YV12
(!!!) *** WARNING [letting unprivileged IDirectFBDisplayLayer::GetSurface() c]
DirectFB: Config - looking for suitable layer
OSD:ERROR:unsupported format: 0x810060a
DirectFB: Test format - layer 0 scale/pos 0
DirectFB: Test format - layer 1 scale/pos 0
DirectFB: Test format - layer 2 scale/pos 8
DirectFB: Test format - layer 3 scale/pos 8
DirectFB: Test format - added layer 3 scale/pos 8
DirectFB: Test format - layer 4 scale/pos 8
DirectFB: Config - layer 3
DirectFB: Config - switching layer to exclusive mode
DirectFB: Config - changing layer configuration (size)
DirectFB: Layer reports format:200808
DirectFB: Desired pixelformat: 810060a
DirectFB: Config - changing layer configuration (format)
DirectFB: Double buffering is active
DirectFB: Requested field parity: Don't care
DirectFB: ConfigError - could not get surface
FATAL: Cannot initialize video driver.
FATAL: Could not initialize video filters (-vf) or video output (-vo).
DirectFB: Uninit entered
DirectFB: Releasing layer
DirectFB: Uninit done.
Exiting... (End of file)
(!!!) *** WARNING [Application exited without deinitialization of DirectFB!] ]
(*) Display params: -analog -f NTSC_M
(*) SMP863x: Closing HDMI chip 1
(!) System is going down !!
(!) System is down!!
ir: Disable NEC decoder
ir: Disable RC5 decoder
ir: Disable RC6 decoder
// 현재 SMP8654 보드 위에 MPLAYER를 보드에 맞게 포팅을 하였습니다
포팅이 맞는건지는 모르겠찌만 엄연히 작동이 않되니 포팅 실패죠
그런데 왜 이러한 문제가 뜨면서 오류가 발생하여 다시 죽어버리는지
모르겠습니다.
우... 그런데 하드웨어 스펙이 MIPS 450Mhz 되는데 mplayer 돌리기엔
많이 무리인가요??
FATAL: Cannot initialize
FATAL: Cannot initialize video driver.
FATAL: Could not initialize video filters (-vf) or video output (-vo).
여기에 답이 있는 것 같네용...
댓글 달기