Losing too many ticks! 문제 경험해보신분?
글쓴이: madenmud / 작성시간: 목, 2004/03/18 - 4:30오후
환경 : vmware workstation4.0.5
fedora 1.90 or Gentoo 1.4 with kernel 2.6.1
on Pentium 4 2.6Ghz HT on
증상 :
부팅후 dmesg 를 보면
Losing too many ticks!
TSC cannot be used as a timesource. (Are you running with SpeedStep?)
Falling back to a sane timesource.
메세지가 있습니다. 그리고 date 긁어 보면 시간이 갈수록 시간이 느려지네요..
뻘짓을 해봤는데 안되네요..ntpdate로 대충 맞춰가면서 쓰는데 근본해결을 해야할거같아서요..
답글 많이 부탁드려요..
Forums:
대충 해결된거 같습니다...
커널컴파일시 dma 관련 부분을 전부 사용하지 않으면 제대로 동작하는 것 같습니다. 이유는 몰라요 -_-; 어짜피 vm에 scsi로 디스크가 들어가 있기 때문에 별문제는 없군요. dma를 사용할일이 없어서 그럴지도 -_-
성인인증통과 -_-V
음..-_-;;
이젠 dmesg에 메세지는 없는데 시간이 빨리가네요 -_-;;;
쉽지않군요 ;)
성인인증통과 -_-V
이런참고글도 있네요..
That's the problem: your CPU is sometimes running faster than VMware Workstation expects it to be running. See Knowledge Base article 709 for one workaround.
http://www.vmware.com/support/kb/enduser/std_adp.php?p_faqid=709
There is also a workaround that doesn't require you to lock the CPU speed to a constant value: put the correct maximum CPU speed in your global config file. On Linux hosts this file is /etc/vmware/config. On Windows hosts, it is normally C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini. In both cases, the file may not exist; if so, create it. Be sure to create it as a plain text file. On Windows, you can use Notepad, but be careful when saving the file that Notepad does not add an extra .txt extension to the filename.
If your machine is 1700 MHz maximum speed, the lines to add to this file are as follows. The first line is the most important one.
host.cpukHz = 1700000
hostinfo.noTSC = TRUE
tools.syncTime = TRUE
성인인증통과 -_-V
댓글 달기