자꾸 질문만 하네요..쩝.....

이번에 서버를 해킹당해서 로그를 분석 해 볼려고 하는중입니다..
쩝.....잘 볼지 몰라서 이럻게 문의를 드립니다......
서버 해킹시간은 대략 11시에서 12사이로 추정됩니다.......
내용의 아래의 같습니다..........
Oct 8 06:24:32 test proftpd[31757]: test (211.212.131.38[211.212.131.38]) - FTP session opened.
Oct 8 06:24:32 test proftpd[31757]: test (211.212.131.38[211.212.131.38]) - FTP session closed.
Oct 8 07:20:16 test proftpd[31762]: test (211.184.9.11[211.184.9.11]) - FTP session opened.
Oct 8 07:20:16 test proftpd[31762]: test (211.184.9.11[211.184.9.11]) - FTP session closed.
Oct 8 07:52:28 test proftpd[31778]: test (cm218-253-25-141.hkcable.com.hk[218.253.25.141]) - FTP session opened.
Oct 8 07:52:29 test proftpd[31778]: test (cm218-253-25-141.hkcable.com.hk[218.253.25.141]) - FTP session closed.
Oct 8 09:31:16 test proftpd[31828]: test (ACB20564.ipt.aol.com[172.178.5.100]) - FTP session opened.
Oct 8 09:31:16 test proftpd[31828]: test (ACB20564.ipt.aol.com[172.178.5.100]) - FTP session closed.
Oct 8 10:25:01 test proftpd[31899]: test (211.197.0.239[211.197.0.239]) - FTP session opened.
Oct 8 10:25:01 test proftpd[31899]: test (211.197.0.239[211.197.0.239]) - PAM(gorpm): Authentication failure.
Oct 8 10:26:46 test proftpd[31900]: test (211.197.0.239[211.197.0.239]) - FTP session opened.
Oct 8 10:26:47 test proftpd[31900]: test (211.197.0.239[211.197.0.239]) - PAM(gorpm): Authentication failure.
Oct 8 10:31:58 test proftpd[31900]: test (211.197.0.239[211.197.0.239]) - FTP no transfer timeout, disconnected.
Oct 8 10:32:23 test proftpd[31908]: test (211.197.0.239[211.197.0.239]) - FTP session opened.
Oct 8 10:32:23 test proftpd[31908]: test (211.197.0.239[211.197.0.239]) - PAM(gorpm): Authentication failure.
Oct 8 10:35:07 test proftpd[31899]: test (211.197.0.239[211.197.0.239]) - FTP no transfer timeout, disconnected.
Oct 8 10:38:10 test proftpd[31908]: test (211.197.0.239[211.197.0.239]) - FTP no transfer timeout, disconnected.
Oct 8 10:46:03 test proftpd[31915]: test (211.197.0.239[211.197.0.239]) - FTP session opened.
Oct 8 10:46:03 test proftpd[31915]: test (211.197.0.239[211.197.0.239]) - PAM(gorpm): Authentication failure.
Oct 8 11:05:23 test sshd(pam_unix)[32037]: session opened for user root by (uid=0)
Oct 8 11:12:25 test proftpd[31915]: test (211.197.0.239[211.197.0.239]) - FTP no transfer timeout, disconnected.
Oct 8 11:12:41 test proftpd[32087]: test (211.197.0.239[211.197.0.239]) - FTP session opened.
Oct 8 11:12:41 test proftpd[32087]: test (211.197.0.239[211.197.0.239]) - PAM(gorpm): Authentication failure.
Oct 8 11:14:19 test sshd(pam_unix)[32037]: session closed for user root
Oct 8 11:16:13 test sshd(pam_unix)[32122]: session opened for user root by (uid=0)
Oct 8 11:19:27 test shutdown: shutting down for system reboot
Oct 8 11:19:27 test init: Switching to runlevel: 6
Oct 8 11:19:28 test rc: Stopping keytable: succeeded
Oct 8 11:19:29 test sshd: sshd -TERM succeeded
Oct 8 11:19:29 test crond: crond shutdown succeeded
Oct 8 11:19:29 test dd: 1+0 records in
Oct 8 11:19:29 test dd: 1+0 records out
Oct 8 11:19:29 test random: Saving random seed: succeeded
Oct 8 11:19:29 test kernel: Kernel logging (proc) stopped.
Oct 8 11:19:29 test kernel: Kernel log daemon terminating.
Oct 8 11:19:30 test syslog: klogd shutdown succeeded
Oct 8 11:19:30 test exiting on signal 15
Oct 8 11:21:08 test syslogd 1.4.1: restart.
Oct 8 11:21:08 test syslog: syslogd startup succeeded
Oct 8 11:21:08 test kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 8 11:21:08 test kernel: Linux version 2.4.18-14smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002
Oct 8 11:21:08 test kernel: BIOS-provided physical RAM map:
Oct 8 11:21:08 test kernel: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 8 11:21:08 test kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 8 11:21:08 test kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 8 11:21:08 test kernel: BIOS-e820: 0000000000100000 - 000000003ffec340 (usable)
Oct 8 11:21:08 test kernel: BIOS-e820: 000000003ffec340 - 000000003fff0000 (ACPI data)
Oct 8 11:21:08 test kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Oct 8 11:21:08 test kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 8 11:21:08 test kernel: 127MB HIGHMEM available.
Oct 8 11:21:08 test kernel: 896MB LOWMEM available.
Oct 8 11:21:08 test syslog: klogd startup succeeded
Oct 8 11:21:08 test kernel: found SMP MP-table at 0009e1d0
Oct 8 11:21:08 test kernel: hm, page 0009e000 reserved twice.
Oct 8 11:21:08 test kernel: hm, page 0009f000 reserved twice.
Oct 8 11:21:08 test kernel: hm, page 0009e000 reserved twice.
Oct 8 11:21:08 test kernel: hm, page 0009f000 reserved twice.
Oct 8 11:21:08 test kernel: WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!
Oct 8 11:21:08 test kernel: On node 0 totalpages: 262124
Oct 8 11:21:08 test kernel: zone(0): 4096 pages.
Oct 8 11:21:08 test kernel: zone(1): 225280 pages.
Oct 8 11:21:08 test kernel: zone(2): 32748 pages.
Oct 8 11:21:08 test kernel: Intel MultiProcessor Specification v1.4
Oct 8 11:21:08 test kernel: Virtual Wire compatibility mode.
Oct 8 11:21:08 test kernel: OEM ID: IBM ENSW Product ID: NF 4100R SMP APIC at: 0xFEE00000
Oct 8 11:21:08 test kernel: Processor #3 Pentium(tm) Pro APIC version 17
Oct 8 11:21:08 test kernel: Processor #0 Pentium(tm) Pro APIC version 17
Oct 8 11:21:08 test kernel: I/O APIC #14 Version 17 at 0xFEC00000.
Oct 8 11:21:08 test kernel: I/O APIC #13 Version 17 at 0xFEC01000.
Oct 8 11:21:08 test kernel: Processors: 2
Oct 8 11:21:08 test kernel: IBM machine detected. Enabling interrupts during APM calls.
Oct 8 11:21:08 test kernel: Kernel testand line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14smp root=LABEL=/
Oct 8 11:21:08 test kernel: Initializing CPU#0
Oct 8 11:21:08 test kernel: Detected 997.000 MHz processor.
Oct 8 11:21:08 test keytable: Loading keymap:
Oct 8 11:21:08 test kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Oct 8 11:21:08 test keytable:
Oct 8 11:21:08 test kernel: Console: colour VGA+ 80x25
Oct 8 11:21:08 test keytable: Loading system font:
Oct 8 11:21:08 test kernel: Calibrating delay loop... 1980.12 BogoMIPS
Oct 8 11:21:08 test kernel: Memory: 1026780k/1048496k available (1451k kernel code, 18124k reserved, 1067k data, 240k init, 130992k highmem)
Oct 8 11:21:08 test kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 8 11:21:08 test kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 8 11:21:08 test kernel: Mount cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 8 11:21:08 test kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 8 11:21:08 test kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Oct 8 11:21:08 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 11:21:08 test keytable: ^[%G
Oct 8 11:21:08 test kernel: CPU: L2 cache: 256K
Oct 8 11:21:08 test keytable:
Oct 8 11:21:08 test rc: Starting keytable: succeeded
Oct 8 11:21:08 test kernel: Intel machine check architecture supported.
Oct 8 11:21:08 test kernel: Intel machine check reporting enabled on CPU#0.
Oct 8 11:21:08 test kernel: Enabling fast FPU save and restore... done.
Oct 8 11:21:08 test kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 8 11:21:08 test kernel: Checking 'hlt' instruction... OK.
Oct 8 11:21:08 test kernel: POSIX conformance testing by UNIFIX
Oct 8 11:21:08 test kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct 8 11:21:08 test kernel: mtrr: detected mtrr type: Intel
Oct 8 11:21:08 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 11:21:08 test kernel: CPU: L2 cache: 256K
Oct 8 11:21:08 test kernel: Intel machine check reporting enabled on CPU#0.
Oct 8 11:21:08 test kernel: CPU0: Intel Pentium III (Coppermine) stepping 0a
Oct 8 11:21:08 test kernel: per-CPU timeslice cutoff: 730.95 usecs.
Oct 8 11:21:08 test kernel: task migration cache decay timeout: 1 msecs.
Oct 8 11:21:08 test kernel: enabled ExtINT on CPU#0
Oct 8 11:21:08 test kernel: ESR value before enabling vector: 00000000
Oct 8 11:21:08 test kernel: ESR value after enabling vector: 00000000
Oct 8 11:21:08 test kernel: Booting processor 1/0 eip 2000
Oct 8 11:21:08 test kernel: Initializing CPU#1
Oct 8 11:21:08 test kernel: masked ExtINT on CPU#1
Oct 8 11:21:08 test kernel: ESR value before enabling vector: 00000000
Oct 8 11:21:08 test kernel: ESR value after enabling vector: 00000000
Oct 8 11:21:08 test kernel: Calibrating delay loop... 1993.77 BogoMIPS
Oct 8 11:21:08 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 11:21:08 test kernel: CPU: L2 cache: 256K
Oct 8 11:21:08 test kernel: Intel machine check reporting enabled on CPU#1.
Oct 8 11:21:08 test random: Initializing random number generator: succeeded
Oct 8 11:21:09 test kernel: CPU1: Intel Pentium III (Coppermine) stepping 0a
Oct 8 11:21:09 test kernel: Total of 2 processors activated (3974.90 BogoMIPS).
Oct 8 11:21:09 test kernel: ENABLING IO-APIC IRQs
Oct 8 11:21:09 test kernel: Setting 14 in the phys_id_present_map
Oct 8 11:21:09 test kernel: ...changing IO-APIC physical APIC ID to 14 ... ok.
Oct 8 11:21:09 test kernel: Setting 13 in the phys_id_present_map
Oct 8 11:21:09 test kernel: ...changing IO-APIC physical APIC ID to 13 ... ok.
Oct 8 11:21:09 test kernel: ..TIMER: vector=0x31 pin1=-1 pin2=-1
Oct 8 11:21:09 test kernel: ...trying to set up timer (IRQ0) through the 8259A ... failed.
Oct 8 11:21:09 test kernel: ...trying to set up timer as Virtual Wire IRQ... works.
Oct 8 11:21:09 test kernel: testing the IO APIC.......................
Oct 8 11:21:09 test kernel:
Oct 8 11:21:09 test kernel:
Oct 8 11:21:09 test kernel: .................................... done.
Oct 8 11:21:09 test kernel: Using local APIC timer interrupts.
Oct 8 11:21:09 test kernel: calibrating APIC timer ...
Oct 8 11:21:09 test kernel: ..... CPU clock speed is 996.1439 MHz.
Oct 8 11:21:09 test kernel: ..... host bus clock speed is 132.1754 MHz.
Oct 8 11:21:09 test kernel: cpu: 0, clocks: 259550, slice: 86516
Oct 8 11:21:09 test kernel: CPU0<T0:259536,T1:173008,D:12,S:86516,C:259550>
Oct 8 11:21:09 test kernel: cpu: 1, clocks: 259550, slice: 86516
Oct 8 11:21:09 test kernel: CPU1<T0:259536,T1:86496,D:8,S:86516,C:259550>
Oct 8 11:21:09 test kernel: checking TSC synchronization across CPUs: passed.
Oct 8 11:21:09 test kernel: migration_task 0 on cpu=0
Oct 8 11:21:09 test kernel: migration_task 1 on cpu=1
Oct 8 11:21:09 test kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
Oct 8 11:21:09 test kernel: PCI: Using configuration type 1
Oct 8 11:21:09 test kernel: PCI: Probing PCI hardware
Oct 8 11:21:09 test kernel: PCI: Discovered peer bus 01
Oct 8 11:21:09 test kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 27
Oct 8 11:21:09 test kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 25
Oct 8 11:21:09 test kernel: PCI->APIC IRQ transform: (B0,I15,P0) -> 7
Oct 8 11:21:09 test kernel: PCI->APIC IRQ transform: (B1,I3,P0) -> 28
Oct 8 11:21:09 test kernel: isapnp: Scanning for PnP cards...
Oct 8 11:21:09 test kernel: isapnp: No Plug & Play device found
Oct 8 11:21:09 test kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Oct 8 11:21:09 test kernel: Linux NET4.0 for Linux 2.4
Oct 8 11:21:09 test kernel: Based upon Swansea University Computer Society NET3.039
Oct 8 11:21:09 test kernel: Initializing RT netlink socket
Oct 8 11:21:09 test kernel: apm: BIOS not found.
Oct 8 11:21:09 test kernel: Starting kswapd
Oct 8 11:21:09 test kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
Oct 8 11:21:09 test kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Oct 8 11:21:09 test kernel: Detected PS/2 Mouse Port.
Oct 8 11:21:09 test sshd: Starting sshd:
Oct 8 11:21:09 test kernel: pty: 2048 Unix98 ptys configured
Oct 8 11:21:09 test kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Oct 8 11:21:09 test kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Oct 8 11:21:09 test sshd: execvp: No such file or directory
Oct 8 11:21:09 test kernel: Real Time Clock Driver v1.10e
Oct 8 11:21:09 test sshd: execvp: No such file or directory
Oct 8 11:21:09 test kernel: oprofile: APIC was already enabled
Oct 8 11:21:09 test kernel: oprofile 0.2 loaded, major 254
Oct 8 11:21:09 test sshd: failed
Oct 8 11:21:09 test sshd: ^[[60G
Oct 8 11:21:09 test kernel: block: 1024 slots per queue, batch=256
Oct 8 11:21:09 test kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Oct 8 11:21:09 test sshd:
Oct 8 11:21:09 test kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 8 11:21:09 test rc: Starting sshd: failed
Oct 8 11:21:09 test kernel: SvrWks OSB4: IDE controller on PCI bus 00 dev 79
Oct 8 11:21:09 test kernel: SvrWks OSB4: chipset revision 0
Oct 8 11:21:09 test kernel: SvrWks OSB4: not 100%% native mode: will probe irqs later
Oct 8 11:21:09 test kernel: ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
Oct 8 11:21:09 test kernel: ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
Oct 8 11:21:09 test kernel: hda: CRN-8241B, ATAPI CD/DVD-ROM drive
Oct 8 11:21:09 test kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 8 11:21:09 test kernel: ide-floppy driver 0.99.newide
Oct 8 11:21:09 test kernel: Floppy drive(s): fd0 is 1.44M
Oct 8 11:21:09 test kernel: FDC 0 is a National Semiconductor PC87306
Oct 8 11:21:09 test kernel: NET4: Frame Diverter 0.46
Oct 8 11:21:09 test kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 8 11:21:09 test kernel: ide-floppy driver 0.99.newide
Oct 8 11:21:09 test kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 8 11:21:09 test kernel: md: Autodetecting RAID arrays.
Oct 8 11:21:09 test kernel: md: autorun ...
Oct 8 11:21:09 test kernel: md: ... autorun DONE.
Oct 8 11:21:09 test kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Oct 8 11:21:09 test kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 8 11:21:09 test kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 8 11:21:09 test kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Oct 8 11:21:09 test kernel: TCP: Hash tables configured (established 262144 bind 65536)
Oct 8 11:21:09 test kernel: Linux IP multicast router 0.06 plus PIM-SM
Oct 8 11:21:09 test kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 8 11:21:09 test kernel: RAMDISK: Compressed image found at block 0
Oct 8 11:21:09 test kernel: Freeing initrd memory: 256k freed
Oct 8 11:21:09 test kernel: VFS: Mounted root (ext2 filesystem).
Oct 8 11:21:09 test kernel: SCSI subsystem driver Revision: 1.00
Oct 8 11:21:09 test kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Oct 8 11:21:09 test kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
Oct 8 11:21:09 test kernel: <Adaptec aic7892 Ultra160 SCSI adapter>
Oct 8 11:21:09 test kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Oct 8 11:21:09 test kernel:
Oct 8 11:21:09 test kernel: blk: queue c35f0a18, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:21:09 test kernel: Vendor: IBM Model: IC35L073UCDY10-0 Rev: S21E
Oct 8 11:21:09 test kernel: Type: Direct-Access ANSI SCSI revision: 03
Oct 8 11:21:09 test crond: execvp: No such file or directory
Oct 8 11:21:09 test kernel: blk: queue c35f0818, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:21:09 test crond: crond startup failed
Oct 8 11:21:09 test kernel: Vendor: IBM Model: IC35L073UCDY10-0 Rev: S21E
Oct 8 11:21:09 test kernel: Type: Direct-Access ANSI SCSI revision: 03
Oct 8 11:21:09 test kernel: blk: queue c35f0418, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:21:09 test kernel: Vendor: IBM Model: FTlV1 S2 Rev: 0
Oct 8 11:21:09 test kernel: Type: Processor ANSI SCSI revision: 02
Oct 8 11:21:09 test kernel: blk: queue f7baf218, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:21:09 test kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Oct 8 11:21:09 test kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Oct 8 11:21:09 test kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Oct 8 11:21:09 test kernel: Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Oct 8 11:21:09 test kernel: (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Oct 8 11:21:09 test kernel: SCSI device sda: 143374805 512-byte hdwr sectors (73408 MB)
Oct 8 11:21:09 test kernel: Partition check:
Oct 8 11:21:09 test kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Oct 8 11:21:09 test kernel: (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Oct 8 11:21:09 test kernel: SCSI device sdb: 143374805 512-byte hdwr sectors (73408 MB)
Oct 8 11:21:10 test kernel: sdb: sdb1
Oct 8 11:21:10 test kernel: Journalled Block Device driver loaded
Oct 8 11:21:10 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:21:10 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:21:10 test kernel: Freeing unused kernel memory: 240k freed
Oct 8 11:21:10 test kernel: usb.c: registered new driver usbdevfs
Oct 8 11:21:10 test kernel: usb.c: registered new driver hub
Oct 8 11:21:10 test kernel: usb-ohci.c: USB OHCI at membase 0xf88aa000, IRQ 7
Oct 8 11:21:10 test kernel: usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
Oct 8 11:21:10 test kernel: usb.c: new USB bus registered, assigned bus number 1
Oct 8 11:21:10 test kernel: hub.c: USB hub found
Oct 8 11:21:10 test kernel: hub.c: 2 ports detected
Oct 8 11:21:10 test kernel: usb.c: registered new driver hiddev
Oct 8 11:21:10 test kernel: usb.c: registered new driver hid
Oct 8 11:21:10 test kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Oct 8 11:21:10 test kernel: hid-core.c: USB HID support drivers
Oct 8 11:21:10 test kernel: mice: PS/2 mouse device teston for all mice
Oct 8 11:21:10 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal
Oct 8 11:21:10 test kernel: Adding Swap: 1052248k swap-space (priority -1)
Oct 8 11:21:10 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:21:10 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,17), internal journal
Oct 8 11:21:10 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:21:10 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:21:10 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,6), internal journal
Oct 8 11:21:10 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:21:10 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:21:10 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal
Oct 8 11:21:10 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:21:10 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:21:10 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,2), internal journal
Oct 8 11:21:10 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:21:10 test kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct 8 11:21:10 test kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Oct 8 11:21:10 test kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Oct 8 11:21:10 test kernel: eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:06:29:1F:75:7F, IRQ 27.
Oct 8 11:21:10 test kernel: Board assembly 754338-001, Physical connectors present: RJ45
Oct 8 11:21:10 test kernel: Primary interface chip i82555 PHY #1.
Oct 8 11:21:10 test kernel: General self-test: passed.
Oct 8 11:21:10 test kernel: Serial sub-system self-test: passed.
Oct 8 11:21:10 test kernel: Internal registers self-test: passed.
Oct 8 11:21:10 test kernel: ROM checksum self-test: passed (0x04f4518b).
Oct 8 11:21:10 test kernel: eth1: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2), 00:06:29:1F:75:80, IRQ 25.
Oct 8 11:21:10 test kernel: Board assembly 754338-001, Physical connectors present: RJ45
Oct 8 11:21:10 test kernel: Primary interface chip i82555 PHY #1.
Oct 8 11:21:10 test kernel: General self-test: passed.
Oct 8 11:21:10 test kernel: Serial sub-system self-test: passed.
Oct 8 11:21:10 test kernel: Internal registers self-test: passed.
Oct 8 11:21:10 test kernel: ROM checksum self-test: passed (0x04f4518b).
Oct 8 11:21:02 test rc.sysinit: Mounting proc filesystem: succeeded
Oct 8 11:21:02 test rc.sysinit: Unmounting initrd: succeeded
Oct 8 11:21:02 test sysctl: net.ipv4.ip_forward = 0
Oct 8 11:21:02 test sysctl: net.ipv4.conf.default.rp_filter = 1
Oct 8 11:21:02 test sysctl: kernel.sysrq = 0
Oct 8 11:21:02 test sysctl: kernel.core_uses_pid = 1
Oct 8 11:21:02 test sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
Oct 8 11:21:02 test sysctl: net.ipv4.conf.all.accept_source_route = 0
Oct 8 11:21:02 test sysctl: net.ipv4.tcp_syncookies = 1
Oct 8 11:21:02 test sysctl: net.ipv4.conf.all.send_redirects = 0
Oct 8 11:21:02 test sysctl: net.ipv4.conf.all.accept_redirects = 0
Oct 8 11:21:02 test sysctl: net.ipv4.icmp_ignore_bogus_error_responses = 1
Oct 8 11:21:02 test sysctl: net.ipv4.conf.all.log_martians = 1
Oct 8 11:21:02 test rc.sysinit: Configuring kernel parameters: succeeded
Oct 8 11:21:02 test date: Wed Oct 8 11:21:01 KST 2003
Oct 8 11:21:02 test rc.sysinit: Setting clock (localtime): Wed Oct 8 11:21:01 KST 2003 succeeded
Oct 8 11:21:02 test rc.sysinit: Loading default keymap succeeded
Oct 8 11:21:02 test unicode_start: ^[%G
Oct 8 11:21:02 test rc.sysinit: Setting default font (latarcyrheb-sun16): succeeded
Oct 8 11:21:02 test rc.sysinit: Setting hostname test: succeeded
Oct 8 11:21:02 test rc.sysinit: Initializing USB controller (usb-ohci): succeeded
Oct 8 11:21:02 test rc.sysinit: Mounting USB filesystem: succeeded
Oct 8 11:21:02 test rc.sysinit: Initializing USB HID interface: succeeded
Oct 8 11:21:02 test rc.sysinit: Initializing USB keyboard: succeeded
Oct 8 11:21:02 test rc.sysinit: Initializing USB mouse: succeeded
Oct 8 11:21:02 test fsck: /: clean, 93633/640000 files, 478861/1279167 blocks
Oct 8 11:21:02 test rc.sysinit: Checking root filesystem succeeded
Oct 8 11:21:02 test rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Oct 8 11:21:02 test rc.sysinit: Activating swap partitions: succeeded
Oct 8 11:21:03 test rc.sysinit: Finding module dependencies: succeeded
Oct 8 11:21:03 test fsck: /data_back: clean, 90/7684096 files, 249784/15356124 blocks
Oct 8 11:21:03 test fsck: /data: clean, 20149/8962048 files, 376281/17920499 blocks
Oct 8 11:21:03 test fsck: /tmp: clean, 14/127744 files, 8128/255024 blocks
Oct 8 11:21:03 test fsck: /var: clean, 1499/384000 files, 133988/767103 blocks
Oct 8 11:21:03 test rc.sysinit: Checking filesystems succeeded
Oct 8 11:21:03 test rc.sysinit: Mounting local filesystems: succeeded
Oct 8 11:21:03 test rc.sysinit: Enabling local filesystem quotas: succeeded
Oct 8 11:21:04 test rc.sysinit: Enabling swap space: succeeded
Oct 8 11:21:05 test init: Entering runlevel: 3
Oct 8 11:21:05 test updfstab: execvp: No such file or directory
Oct 8 11:21:05 test kudzu: Updating /etc/fstab failed
Oct 8 11:21:05 test kudzu: failed
Oct 8 11:21:05 test sysctl: net.ipv4.ip_forward = 0
Oct 8 11:21:05 test sysctl: net.ipv4.conf.default.rp_filter = 1
Oct 8 11:21:05 test sysctl: kernel.sysrq = 0
Oct 8 11:21:05 test sysctl: kernel.core_uses_pid = 1
Oct 8 11:21:05 test sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
Oct 8 11:21:05 test sysctl: net.ipv4.conf.all.accept_source_route = 0
Oct 8 11:21:05 test sysctl: net.ipv4.tcp_syncookies = 1
Oct 8 11:21:05 test sysctl: net.ipv4.conf.all.send_redirects = 0
Oct 8 11:21:05 test sysctl: net.ipv4.conf.all.accept_redirects = 0
Oct 8 11:21:05 test sysctl: net.ipv4.icmp_ignore_bogus_error_responses = 1
Oct 8 11:21:05 test sysctl: net.ipv4.conf.all.log_martians = 1
Oct 8 11:21:05 test network: Setting network parameters: succeeded
Oct 8 11:21:05 test network: Bringing up loopback interface: succeeded
Oct 8 11:21:08 test network: Bringing up interface eth0: succeeded
Oct 8 11:36:52 test login(pam_unix)[514]: session opened for user root by LOGIN(uid=0)
Oct 8 11:36:52 test -- root[514]: ROOT LOGIN ON tty1
Oct 8 11:37:49 test kernel: keyboard: unrecognized scancode (71) - ignored
Oct 8 11:37:50 test last message repeated 2 times
Oct 8 11:38:34 test login(pam_unix)[514]: session closed for user root
Oct 8 11:41:40 test login(pam_unix)[558]: session opened for user root by LOGIN(uid=0)
Oct 8 11:41:40 test -- root[558]: ROOT LOGIN ON tty1
Oct 8 11:42:08 test shutdown: shutting down for system reboot
Oct 8 11:42:08 test init: Switching to runlevel: 6
Oct 8 11:42:08 test login(pam_unix)[558]: session closed for user root
Oct 8 11:42:09 test rc: Stopping keytable: succeeded
Oct 8 11:42:09 test dd: 1+0 records in
Oct 8 11:42:09 test dd: 1+0 records out
Oct 8 11:42:09 test random: Saving random seed: succeeded
Oct 8 11:42:09 test kernel: Kernel logging (proc) stopped.
Oct 8 11:42:09 test kernel: Kernel log daemon terminating.
Oct 8 11:42:10 test syslog: klogd shutdown succeeded
Oct 8 11:42:10 test exiting on signal 15
Oct 8 11:43:46 test syslogd 1.4.1: restart.
Oct 8 11:43:46 test syslog: syslogd startup succeeded
Oct 8 11:43:46 test kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 8 11:43:46 test syslog: klogd startup succeeded
Oct 8 11:43:46 test kernel: Linux version 2.4.18-14smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002
Oct 8 11:43:46 test kernel: BIOS-provided physical RAM map:
Oct 8 11:43:46 test kernel: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 8 11:43:46 test kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 8 11:43:46 test kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 8 11:43:46 test kernel: BIOS-e820: 0000000000100000 - 000000003ffec340 (usable)
Oct 8 11:43:46 test kernel: BIOS-e820: 000000003ffec340 - 000000003fff0000 (ACPI data)
Oct 8 11:43:46 test kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Oct 8 11:43:46 test kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 8 11:43:46 test kernel: 127MB HIGHMEM available.
Oct 8 11:43:46 test kernel: 896MB LOWMEM available.
Oct 8 11:43:46 test kernel: found SMP MP-table at 0009e1d0
Oct 8 11:43:46 test kernel: hm, page 0009e000 reserved twice.
Oct 8 11:43:46 test kernel: hm, page 0009f000 reserved twice.
Oct 8 11:43:46 test kernel: hm, page 0009e000 reserved twice.
Oct 8 11:43:46 test kernel: hm, page 0009f000 reserved twice.
Oct 8 11:43:46 test kernel: WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!
Oct 8 11:43:46 test kernel: On node 0 totalpages: 262124
Oct 8 11:43:46 test kernel: zone(0): 4096 pages.
Oct 8 11:43:46 test kernel: zone(1): 225280 pages.
Oct 8 11:43:46 test kernel: zone(2): 32748 pages.
Oct 8 11:43:46 test kernel: Intel MultiProcessor Specification v1.4
Oct 8 11:43:46 test kernel: Virtual Wire compatibility mode.
Oct 8 11:43:46 test kernel: OEM ID: IBM ENSW Product ID: NF 4100R SMP APIC at: 0xFEE00000
Oct 8 11:43:46 test kernel: Processor #3 Pentium(tm) Pro APIC version 17
Oct 8 11:43:46 test kernel: Processor #0 Pentium(tm) Pro APIC version 17
Oct 8 11:43:46 test kernel: I/O APIC #14 Version 17 at 0xFEC00000.
Oct 8 11:43:46 test kernel: I/O APIC #13 Version 17 at 0xFEC01000.
Oct 8 11:43:46 test kernel: Processors: 2
Oct 8 11:43:46 test keytable: Loading keymap:
Oct 8 11:43:46 test kernel: IBM machine detected. Enabling interrupts during APM calls.
Oct 8 11:43:46 test kernel: Kernel testand line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14smp root=LABEL=/
Oct 8 11:43:46 test keytable: ^[[60G
Oct 8 11:43:46 test kernel: Initializing CPU#0
Oct 8 11:43:46 test kernel: Detected 997.172 MHz processor.
Oct 8 11:43:46 test kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Oct 8 11:43:46 test kernel: Console: colour VGA+ 80x25
Oct 8 11:43:46 test keytable:
Oct 8 11:43:46 test kernel: Calibrating delay loop... 1980.12 BogoMIPS
Oct 8 11:43:46 test keytable: Loading system font:
Oct 8 11:43:46 test kernel: Memory: 1026780k/1048496k available (1451k kernel code, 18124k reserved, 1067k data, 240k init, 130992k highmem)
Oct 8 11:43:46 test kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 8 11:43:46 test kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 8 11:43:46 test kernel: Mount cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 8 11:43:46 test keytable: ^[%G
Oct 8 11:43:46 test keytable: ^[[60G
Oct 8 11:43:46 test keytable:
Oct 8 11:43:46 test rc: Starting keytable: succeeded
Oct 8 11:43:46 test kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 8 11:43:46 test kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Oct 8 11:43:46 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 11:43:46 test kernel: CPU: L2 cache: 256K
Oct 8 11:43:46 test kernel: Intel machine check architecture supported.
Oct 8 11:43:46 test kernel: Intel machine check reporting enabled on CPU#0.
Oct 8 11:43:46 test kernel: Enabling fast FPU save and restore... done.
Oct 8 11:43:46 test kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 8 11:43:46 test kernel: Checking 'hlt' instruction... OK.
Oct 8 11:43:46 test kernel: POSIX conformance testing by UNIFIX
Oct 8 11:43:46 test kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct 8 11:43:46 test kernel: mtrr: detected mtrr type: Intel
Oct 8 11:43:46 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 11:43:46 test kernel: CPU: L2 cache: 256K
Oct 8 11:43:46 test kernel: Intel machine check reporting enabled on CPU#0.
Oct 8 11:43:46 test kernel: CPU0: Intel Pentium III (Coppermine) stepping 0a
Oct 8 11:43:46 test kernel: per-CPU timeslice cutoff: 730.95 usecs.
Oct 8 11:43:46 test kernel: task migration cache decay timeout: 1 msecs.
Oct 8 11:43:46 test kernel: enabled ExtINT on CPU#0
Oct 8 11:43:46 test kernel: ESR value before enabling vector: 00000000
Oct 8 11:43:46 test kernel: ESR value after enabling vector: 00000000
Oct 8 11:43:46 test kernel: Booting processor 1/0 eip 2000
Oct 8 11:43:46 test random: Initializing random number generator: succeeded
Oct 8 11:43:46 test kernel: Initializing CPU#1
Oct 8 11:43:46 test kernel: masked ExtINT on CPU#1
Oct 8 11:43:46 test kernel: ESR value before enabling vector: 00000000
Oct 8 11:43:46 test kernel: ESR value after enabling vector: 00000000
Oct 8 11:43:46 test kernel: Calibrating delay loop... 1993.77 BogoMIPS
Oct 8 11:43:46 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 11:43:46 test kernel: CPU: L2 cache: 256K
Oct 8 11:43:46 test kernel: Intel machine check reporting enabled on CPU#1.
Oct 8 11:43:46 test kernel: CPU1: Intel Pentium III (Coppermine) stepping 0a
Oct 8 11:43:46 test kernel: Total of 2 processors activated (3974.90 BogoMIPS).
Oct 8 11:43:46 test kernel: ENABLING IO-APIC IRQs
Oct 8 11:43:46 test kernel: Setting 14 in the phys_id_present_map
Oct 8 11:43:46 test kernel: ...changing IO-APIC physical APIC ID to 14 ... ok.
Oct 8 11:43:46 test kernel: Setting 13 in the phys_id_present_map
Oct 8 11:43:46 test kernel: ...changing IO-APIC physical APIC ID to 13 ... ok.
Oct 8 11:43:46 test kernel: ..TIMER: vector=0x31 pin1=-1 pin2=-1
Oct 8 11:43:46 test kernel: ...trying to set up timer (IRQ0) through the 8259A ... failed.
Oct 8 11:43:46 test kernel: ...trying to set up timer as Virtual Wire IRQ... works.
Oct 8 11:43:46 test kernel: testing the IO APIC.......................
Oct 8 11:43:46 test kernel:
Oct 8 11:43:47 test kernel:
Oct 8 11:43:47 test kernel: .................................... done.
Oct 8 11:43:47 test kernel: Using local APIC timer interrupts.
Oct 8 11:43:47 test kernel: calibrating APIC timer ...
Oct 8 11:43:47 test kernel: ..... CPU clock speed is 996.1241 MHz.
Oct 8 11:43:47 test kernel: ..... host bus clock speed is 132.1727 MHz.
Oct 8 11:43:47 test kernel: cpu: 0, clocks: 259523, slice: 86507
Oct 8 11:43:47 test kernel: CPU0<T0:259520,T1:173008,D:5,S:86507,C:259523>
Oct 8 11:43:47 test kernel: cpu: 1, clocks: 259523, slice: 86507
Oct 8 11:43:47 test kernel: CPU1<T0:259520,T1:86496,D:10,S:86507,C:259523>
Oct 8 11:43:47 test kernel: checking TSC synchronization across CPUs: passed.
Oct 8 11:43:47 test kernel: migration_task 0 on cpu=0
Oct 8 11:43:47 test kernel: migration_task 1 on cpu=1
Oct 8 11:43:47 test kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
Oct 8 11:43:47 test kernel: PCI: Using configuration type 1
Oct 8 11:43:47 test kernel: PCI: Probing PCI hardware
Oct 8 11:43:47 test kernel: PCI: Discovered peer bus 01
Oct 8 11:43:47 test kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 27
Oct 8 11:43:47 test kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 25
Oct 8 11:43:47 test sshd: Starting sshd:
Oct 8 11:43:47 test sshd: execvp: No such file or directory
Oct 8 11:43:47 test kernel: PCI->APIC IRQ transform: (B0,I15,P0) -> 7
Oct 8 11:43:47 test kernel: PCI->APIC IRQ transform: (B1,I3,P0) -> 28
Oct 8 11:43:47 test sshd: failed
Oct 8 11:43:47 test sshd: execvp: No such file or directory
Oct 8 11:43:47 test kernel: isapnp: Scanning for PnP cards...
Oct 8 11:43:47 test kernel: isapnp: No Plug & Play device found
Oct 8 11:43:47 test kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Oct 8 11:43:47 test kernel: Linux NET4.0 for Linux 2.4
Oct 8 11:43:47 test sshd:
Oct 8 11:43:47 test kernel: Based upon Swansea University Computer Society NET3.039
Oct 8 11:43:47 test kernel: Initializing RT netlink socket
Oct 8 11:43:47 test rc: Starting sshd: failed
Oct 8 11:43:47 test kernel: apm: BIOS not found.
Oct 8 11:43:47 test kernel: Starting kswapd
Oct 8 11:43:47 test kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
Oct 8 11:43:47 test kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Oct 8 11:43:47 test kernel: Detected PS/2 Mouse Port.
Oct 8 11:43:47 test kernel: pty: 2048 Unix98 ptys configured
Oct 8 11:43:47 test kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Oct 8 11:43:47 test kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Oct 8 11:43:47 test kernel: Real Time Clock Driver v1.10e
Oct 8 11:43:47 test kernel: oprofile: APIC was already enabled
Oct 8 11:43:47 test kernel: oprofile 0.2 loaded, major 254
Oct 8 11:43:47 test kernel: block: 1024 slots per queue, batch=256
Oct 8 11:43:47 test kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Oct 8 11:43:47 test kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 8 11:43:47 test kernel: SvrWks OSB4: IDE controller on PCI bus 00 dev 79
Oct 8 11:43:47 test kernel: SvrWks OSB4: chipset revision 0
Oct 8 11:43:47 test kernel: SvrWks OSB4: not 100%% native mode: will probe irqs later
Oct 8 11:43:47 test kernel: ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
Oct 8 11:43:47 test kernel: ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
Oct 8 11:43:47 test kernel: hda: CRN-8241B, ATAPI CD/DVD-ROM drive
Oct 8 11:43:47 test kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 8 11:43:47 test kernel: ide-floppy driver 0.99.newide
Oct 8 11:43:47 test kernel: Floppy drive(s): fd0 is 1.44M
Oct 8 11:43:47 test kernel: FDC 0 is a National Semiconductor PC87306
Oct 8 11:43:47 test kernel: NET4: Frame Diverter 0.46
Oct 8 11:43:47 test kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 8 11:43:47 test kernel: ide-floppy driver 0.99.newide
Oct 8 11:43:47 test kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 8 11:43:47 test kernel: md: Autodetecting RAID arrays.
Oct 8 11:43:47 test kernel: md: autorun ...
Oct 8 11:43:47 test kernel: md: ... autorun DONE.
Oct 8 11:43:47 test kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Oct 8 11:43:47 test crond: execvp: No such file or directory
Oct 8 11:43:47 test kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 8 11:43:47 test crond: crond startup failed
Oct 8 11:43:47 test kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 8 11:43:47 test kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Oct 8 11:43:47 test kernel: TCP: Hash tables configured (established 262144 bind 65536)
Oct 8 11:43:47 test kernel: Linux IP multicast router 0.06 plus PIM-SM
Oct 8 11:43:47 test kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 8 11:43:47 test kernel: RAMDISK: Compressed image found at block 0
Oct 8 11:43:47 test kernel: Freeing initrd memory: 256k freed
Oct 8 11:43:47 test kernel: VFS: Mounted root (ext2 filesystem).
Oct 8 11:43:47 test kernel: SCSI subsystem driver Revision: 1.00
Oct 8 11:43:47 test kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Oct 8 11:43:47 test kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
Oct 8 11:43:47 test kernel: <Adaptec aic7892 Ultra160 SCSI adapter>
Oct 8 11:43:47 test kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Oct 8 11:43:47 test kernel:
Oct 8 11:43:47 test kernel: blk: queue c35f0a18, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:43:47 test kernel: Vendor: IBM Model: IC35L073UCDY10-0 Rev: S21E
Oct 8 11:43:47 test kernel: Type: Direct-Access ANSI SCSI revision: 03
Oct 8 11:43:47 test kernel: blk: queue c35f0818, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:43:47 test kernel: Vendor: IBM Model: IC35L073UCDY10-0 Rev: S21E
Oct 8 11:43:47 test kernel: Type: Direct-Access ANSI SCSI revision: 03
Oct 8 11:43:47 test kernel: blk: queue c35f0418, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:43:47 test kernel: Vendor: IBM Model: FTlV1 S2 Rev: 0
Oct 8 11:43:47 test kernel: Type: Processor ANSI SCSI revision: 02
Oct 8 11:43:47 test kernel: blk: queue f7baf218, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 11:43:47 test kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Oct 8 11:43:47 test kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Oct 8 11:43:47 test kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Oct 8 11:43:47 test kernel: Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Oct 8 11:43:47 test kernel: (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Oct 8 11:43:47 test kernel: SCSI device sda: 143374805 512-byte hdwr sectors (73408 MB)
Oct 8 11:43:47 test kernel: Partition check:
Oct 8 11:43:47 test kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Oct 8 11:43:47 test kernel: (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Oct 8 11:43:47 test kernel: SCSI device sdb: 143374805 512-byte hdwr sectors (73408 MB)
Oct 8 11:43:47 test kernel: sdb: sdb1
Oct 8 11:43:47 test kernel: Journalled Block Device driver loaded
Oct 8 11:43:47 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:43:47 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:43:47 test kernel: Freeing unused kernel memory: 240k freed
Oct 8 11:43:47 test kernel: usb.c: registered new driver usbdevfs
Oct 8 11:43:47 test kernel: usb.c: registered new driver hub
Oct 8 11:43:47 test kernel: usb-ohci.c: USB OHCI at membase 0xf88aa000, IRQ 7
Oct 8 11:43:47 test kernel: usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
Oct 8 11:43:47 test kernel: usb.c: new USB bus registered, assigned bus number 1
Oct 8 11:43:47 test kernel: hub.c: USB hub found
Oct 8 11:43:48 test kernel: hub.c: 2 ports detected
Oct 8 11:43:48 test kernel: usb.c: registered new driver hiddev
Oct 8 11:43:48 test kernel: usb.c: registered new driver hid
Oct 8 11:43:48 test kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Oct 8 11:43:48 test kernel: hid-core.c: USB HID support drivers
Oct 8 11:43:48 test kernel: mice: PS/2 mouse device teston for all mice
Oct 8 11:43:48 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal
Oct 8 11:43:48 test kernel: Adding Swap: 1052248k swap-space (priority -1)
Oct 8 11:43:48 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:43:48 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,17), internal journal
Oct 8 11:43:48 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:43:48 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:43:48 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,6), internal journal
Oct 8 11:43:48 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:43:48 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:43:48 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,5), internal journal
Oct 8 11:43:48 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:43:48 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 11:43:48 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,2), internal journal
Oct 8 11:43:48 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 11:43:48 test kernel: ip_tables: (C) 2000-2002 Netfilter core team
Oct 8 11:43:48 test kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
Oct 8 11:43:48 test kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Oct 8 11:43:48 test kernel: eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:06:29:1F:75:7F, IRQ 27.
Oct 8 11:43:48 test kernel: Board assembly 754338-001, Physical connectors present: RJ45
Oct 8 11:43:48 test kernel: Primary interface chip i82555 PHY #1.
Oct 8 11:43:48 test kernel: General self-test: passed.
Oct 8 11:43:48 test kernel: Serial sub-system self-test: passed.
Oct 8 11:43:48 test kernel: Internal registers self-test: passed.
Oct 8 11:43:48 test kernel: ROM checksum self-test: passed (0x04f4518b).
Oct 8 11:43:48 test kernel: eth1: Intel Corp. 82557/8/9 [Ethernet Pro 100] (#2), 00:06:29:1F:75:80, IRQ 25.
Oct 8 11:43:48 test kernel: Board assembly 754338-001, Physical connectors present: RJ45
Oct 8 11:43:48 test kernel: Primary interface chip i82555 PHY #1.
Oct 8 11:43:48 test kernel: General self-test: passed.
Oct 8 11:43:48 test kernel: Serial sub-system self-test: passed.
Oct 8 11:43:48 test kernel: Internal registers self-test: passed.
Oct 8 11:43:48 test kernel: ROM checksum self-test: passed (0x04f4518b).
Oct 8 11:43:40 test rc.sysinit: Mounting proc filesystem: succeeded
Oct 8 11:43:40 test rc.sysinit: Unmounting initrd: succeeded
Oct 8 11:43:40 test sysctl: net.ipv4.ip_forward = 0
Oct 8 11:43:40 test sysctl: net.ipv4.conf.default.rp_filter = 1
Oct 8 11:43:40 test sysctl: kernel.sysrq = 0
Oct 8 11:43:40 test sysctl: kernel.core_uses_pid = 1
Oct 8 11:43:40 test sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
Oct 8 11:43:40 test sysctl: net.ipv4.conf.all.accept_source_route = 0
Oct 8 11:43:40 test sysctl: net.ipv4.tcp_syncookies = 1
Oct 8 11:43:40 test sysctl: net.ipv4.conf.all.send_redirects = 0
Oct 8 11:43:40 test sysctl: net.ipv4.conf.all.accept_redirects = 0
Oct 8 11:43:40 test sysctl: net.ipv4.icmp_ignore_bogus_error_responses = 1
Oct 8 11:43:40 test sysctl: net.ipv4.conf.all.log_martians = 1
Oct 8 11:43:40 test rc.sysinit: Configuring kernel parameters: succeeded
Oct 8 11:43:40 test date: Wed Oct 8 11:43:39 KST 2003
Oct 8 11:43:40 test rc.sysinit: Setting clock (localtime): Wed Oct 8 11:43:39 KST 2003 succeeded
Oct 8 11:43:40 test rc.sysinit: Loading default keymap succeeded
Oct 8 11:43:40 test unicode_start: ^[%G
Oct 8 11:43:40 test rc.sysinit: Setting default font (latarcyrheb-sun16): succeeded
Oct 8 11:43:40 test rc.sysinit: Setting hostname test: succeeded
Oct 8 11:43:40 test rc.sysinit: Initializing USB controller (usb-ohci): succeeded
Oct 8 11:43:40 test rc.sysinit: Mounting USB filesystem: succeeded
Oct 8 11:43:40 test rc.sysinit: Initializing USB HID interface: succeeded
Oct 8 11:43:40 test rc.sysinit: Initializing USB keyboard: succeeded
Oct 8 11:43:40 test rc.sysinit: Initializing USB mouse: succeeded
Oct 8 11:43:40 test fsck: /: clean, 93633/640000 files, 478861/1279167 blocks
Oct 8 11:43:40 test rc.sysinit: Checking root filesystem succeeded
Oct 8 11:43:40 test rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Oct 8 11:43:40 test rc.sysinit: Activating swap partitions: succeeded
Oct 8 11:43:41 test rc.sysinit: Finding module dependencies: succeeded
Oct 8 11:43:41 test fsck: /data: clean, 20149/8962048 files, 376281/17920499 blocks
Oct 8 11:43:41 test fsck: /data_back: clean, 90/7684096 files, 249784/15356124 blocks
Oct 8 11:43:41 test fsck: /tmp: clean, 14/127744 files, 8128/255024 blocks
Oct 8 11:43:41 test fsck: /var: clean, 1494/384000 files, 133612/767103 blocks
Oct 8 11:43:41 test rc.sysinit: Checking filesystems succeeded
Oct 8 11:43:41 test rc.sysinit: Mounting local filesystems: succeeded
Oct 8 11:43:41 test rc.sysinit: Enabling local filesystem quotas: succeeded
Oct 8 11:43:41 test rc.sysinit: Enabling swap space: succeeded
Oct 8 11:43:43 test init: Entering runlevel: 3
Oct 8 11:43:43 test updfstab: execvp: No such file or directory
Oct 8 11:43:43 test kudzu: Updating /etc/fstab failed
Oct 8 11:43:43 test kudzu: failed
Oct 8 11:43:43 test sysctl: net.ipv4.ip_forward = 0
Oct 8 11:43:43 test sysctl: net.ipv4.conf.default.rp_filter = 1
Oct 8 11:43:43 test sysctl: kernel.sysrq = 0
Oct 8 11:43:43 test sysctl: kernel.core_uses_pid = 1
Oct 8 11:43:43 test sysctl: net.ipv4.icmp_echo_ignore_broadcasts = 1
Oct 8 11:43:43 test sysctl: net.ipv4.conf.all.accept_source_route = 0
Oct 8 11:43:43 test sysctl: net.ipv4.tcp_syncookies = 1
Oct 8 11:43:43 test sysctl: net.ipv4.conf.all.send_redirects = 0
Oct 8 11:43:43 test sysctl: net.ipv4.conf.all.accept_redirects = 0
Oct 8 11:43:43 test sysctl: net.ipv4.icmp_ignore_bogus_error_responses = 1
Oct 8 11:43:43 test sysctl: net.ipv4.conf.all.log_martians = 1
Oct 8 11:43:43 test network: Setting network parameters: succeeded
Oct 8 11:43:43 test network: Bringing up loopback interface: succeeded
Oct 8 11:43:46 test network: Bringing up interface eth0: succeeded
Oct 8 12:39:39 test login(pam_unix)[513]: session opened for user root by LOGIN(uid=0)
Oct 8 12:39:39 test -- root[513]: ROOT LOGIN ON tty1
Oct 8 12:41:41 test iptables: succeeded
Oct 8 12:41:41 test last message repeated 2 times
Oct 8 12:42:21 test sshd: sshd shutdown failed
Oct 8 12:42:21 test sshd: execvp: No such file or directory
Oct 8 12:42:21 test sshd: failed
Oct 8 12:42:23 test sshd: sshd shutdown failed
Oct 8 12:42:23 test sshd: execvp: No such file or directory
Oct 8 12:42:23 test sshd: failed
Oct 8 12:42:49 test sshd: sshd shutdown failed
Oct 8 12:42:49 test sshd: execvp: No such file or directory
Oct 8 12:42:49 test sshd: failed
Oct 8 12:44:27 test sshd: sshd shutdown failed
Oct 8 12:44:27 test sshd: execvp: No such file or directory
Oct 8 12:44:27 test sshd: failed
Oct 8 12:51:53 test shutdown: shutting down for system reboot
Oct 8 12:51:53 test init: Switching to runlevel: 6
Oct 8 12:51:53 test login(pam_unix)[513]: session closed for user root
Oct 8 12:51:54 test rc: Stopping keytable: succeeded
Oct 8 12:51:54 test dd: 1+0 records in
Oct 8 12:51:54 test dd: 1+0 records out
Oct 8 12:51:54 test random: Saving random seed: succeeded
Oct 8 12:51:54 test kernel: Kernel logging (proc) stopped.
Oct 8 12:51:54 test kernel: Kernel log daemon terminating.
Oct 8 12:51:55 test syslog: klogd shutdown succeeded
Oct 8 12:51:55 test exiting on signal 15
Oct 8 12:53:29 test syslogd 1.4.1: restart.
Oct 8 12:53:29 test syslog: syslogd startup succeeded
Oct 8 12:53:29 test kernel: klogd 1.4.1, log source = /proc/kmsg started.
Oct 8 12:53:29 test kernel: Linux version 2.4.18-14smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002
Oct 8 12:53:29 test kernel: BIOS-provided physical RAM map:
Oct 8 12:53:29 test kernel: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 8 12:53:29 test kernel: BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 8 12:53:29 test kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 8 12:53:29 test kernel: BIOS-e820: 0000000000100000 - 000000003ffec340 (usable)
Oct 8 12:53:29 test kernel: BIOS-e820: 000000003ffec340 - 000000003fff0000 (ACPI data)
Oct 8 12:53:29 test kernel: BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Oct 8 12:53:29 test kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 8 12:53:29 test kernel: 127MB HIGHMEM available.
Oct 8 12:53:29 test kernel: 896MB LOWMEM available.
Oct 8 12:53:29 test syslog: klogd startup succeeded
Oct 8 12:53:29 test kernel: found SMP MP-table at 0009e1d0
Oct 8 12:53:29 test kernel: hm, page 0009e000 reserved twice.
Oct 8 12:53:29 test kernel: hm, page 0009f000 reserved twice.
Oct 8 12:53:29 test kernel: hm, page 0009e000 reserved twice.
Oct 8 12:53:29 test kernel: hm, page 0009f000 reserved twice.
Oct 8 12:53:29 test kernel: WARNING: MP table in the EBDA can be UNSAFE, contact linux-smp@vger.kernel.org if you experience SMP problems!
Oct 8 12:53:29 test kernel: On node 0 totalpages: 262124
Oct 8 12:53:29 test kernel: zone(0): 4096 pages.
Oct 8 12:53:29 test kernel: zone(1): 225280 pages.
Oct 8 12:53:29 test kernel: zone(2): 32748 pages.
Oct 8 12:53:29 test kernel: Intel MultiProcessor Specification v1.4
Oct 8 12:53:29 test kernel: Virtual Wire compatibility mode.
Oct 8 12:53:29 test kernel: OEM ID: IBM ENSW Product ID: NF 4100R SMP APIC at: 0xFEE00000
Oct 8 12:53:29 test kernel: Processor #3 Pentium(tm) Pro APIC version 17
Oct 8 12:53:29 test kernel: Processor #0 Pentium(tm) Pro APIC version 17
Oct 8 12:53:29 test kernel: I/O APIC #14 Version 17 at 0xFEC00000.
Oct 8 12:53:29 test kernel: I/O APIC #13 Version 17 at 0xFEC01000.
Oct 8 12:53:29 test kernel: Processors: 2
Oct 8 12:53:29 test kernel: IBM machine detected. Enabling interrupts during APM calls.
Oct 8 12:53:29 test kernel: Kernel testand line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.18-14smp root=LABEL=/
Oct 8 12:53:29 test kernel: Initializing CPU#0
Oct 8 12:53:29 test kernel: Detected 997.000 MHz processor.
Oct 8 12:53:29 test kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Oct 8 12:53:29 test kernel: Console: colour VGA+ 80x25
Oct 8 12:53:29 test keytable: Loading keymap:
Oct 8 12:53:29 test kernel: Calibrating delay loop... 1980.12 BogoMIPS
Oct 8 12:53:29 test keytable:
Oct 8 12:53:29 test kernel: Memory: 1026780k/1048496k available (1451k kernel code, 18124k reserved, 1067k data, 240k init, 130992k highmem)
Oct 8 12:53:29 test keytable: Loading system font:
Oct 8 12:53:29 test kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 8 12:53:29 test kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 8 12:53:29 test kernel: Mount cache hash table entries: 16384 (order: 5, 131072 bytes)
Oct 8 12:53:29 test kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 8 12:53:29 test kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Oct 8 12:53:29 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 12:53:29 test kernel: CPU: L2 cache: 256K
Oct 8 12:53:29 test keytable: ^[%G
Oct 8 12:53:29 test keytable: ^[[60G
Oct 8 12:53:29 test kernel: Intel machine check architecture supported.
Oct 8 12:53:29 test keytable:
Oct 8 12:53:29 test kernel: Intel machine check reporting enabled on CPU#0.
Oct 8 12:53:29 test rc: Starting keytable: succeeded
Oct 8 12:53:29 test kernel: Enabling fast FPU save and restore... done.
Oct 8 12:53:29 test kernel: Enabling unmasked SIMD FPU exception support... done.
Oct 8 12:53:29 test kernel: Checking 'hlt' instruction... OK.
Oct 8 12:53:29 test kernel: POSIX conformance testing by UNIFIX
Oct 8 12:53:29 test kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Oct 8 12:53:29 test kernel: mtrr: detected mtrr type: Intel
Oct 8 12:53:29 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 12:53:29 test kernel: CPU: L2 cache: 256K
Oct 8 12:53:29 test kernel: Intel machine check reporting enabled on CPU#0.
Oct 8 12:53:29 test kernel: CPU0: Intel Pentium III (Coppermine) stepping 0a
Oct 8 12:53:29 test kernel: per-CPU timeslice cutoff: 730.95 usecs.
Oct 8 12:53:29 test kernel: task migration cache decay timeout: 1 msecs.
Oct 8 12:53:29 test kernel: enabled ExtINT on CPU#0
Oct 8 12:53:29 test kernel: ESR value before enabling vector: 00000000
Oct 8 12:53:29 test kernel: ESR value after enabling vector: 00000000
Oct 8 12:53:29 test kernel: Booting processor 1/0 eip 2000
Oct 8 12:53:29 test kernel: Initializing CPU#1
Oct 8 12:53:29 test kernel: masked ExtINT on CPU#1
Oct 8 12:53:29 test kernel: ESR value before enabling vector: 00000000
Oct 8 12:53:29 test kernel: ESR value after enabling vector: 00000000
Oct 8 12:53:29 test kernel: Calibrating delay loop... 1993.77 BogoMIPS
Oct 8 12:53:29 test kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Oct 8 12:53:29 test kernel: CPU: L2 cache: 256K
Oct 8 12:53:29 test kernel: Intel machine check reporting enabled on CPU#1.
Oct 8 12:53:29 test random: Initializing random number generator: succeeded
Oct 8 12:53:29 test kernel: CPU1: Intel Pentium III (Coppermine) stepping 0a
Oct 8 12:53:29 test kernel: Total of 2 processors activated (3974.90 BogoMIPS).
Oct 8 12:53:29 test kernel: ENABLING IO-APIC IRQs
Oct 8 12:53:29 test kernel: Setting 14 in the phys_id_present_map
Oct 8 12:53:29 test kernel: ...changing IO-APIC physical APIC ID to 14 ... ok.
Oct 8 12:53:29 test kernel: Setting 13 in the phys_id_present_map
Oct 8 12:53:29 test kernel: ...changing IO-APIC physical APIC ID to 13 ... ok.
Oct 8 12:53:29 test kernel: ..TIMER: vector=0x31 pin1=-1 pin2=-1
Oct 8 12:53:29 test kernel: ...trying to set up timer (IRQ0) through the 8259A ... failed.
Oct 8 12:53:29 test kernel: ...trying to set up timer as Virtual Wire IRQ... works.
Oct 8 12:53:30 test kernel: testing the IO APIC.......................
Oct 8 12:53:30 test kernel:
Oct 8 12:53:30 test kernel:
Oct 8 12:53:30 test kernel: .................................... done.
Oct 8 12:53:30 test kernel: Using local APIC timer interrupts.
Oct 8 12:53:30 test kernel: calibrating APIC timer ...
Oct 8 12:53:30 test kernel: ..... CPU clock speed is 996.1438 MHz.
Oct 8 12:53:30 test kernel: ..... host bus clock speed is 132.1754 MHz.
Oct 8 12:53:30 test kernel: cpu: 0, clocks: 259550, slice: 86516
Oct 8 12:53:30 test kernel: CPU0<T0:259536,T1:173008,D:12,S:86516,C:259550>
Oct 8 12:53:30 test kernel: cpu: 1, clocks: 259550, slice: 86516
Oct 8 12:53:30 test kernel: CPU1<T0:259536,T1:86496,D:8,S:86516,C:259550>
Oct 8 12:53:30 test kernel: checking TSC synchronization across CPUs: passed.
Oct 8 12:53:30 test kernel: migration_task 0 on cpu=0
Oct 8 12:53:30 test kernel: migration_task 1 on cpu=1
Oct 8 12:53:30 test kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
Oct 8 12:53:30 test kernel: PCI: Using configuration type 1
Oct 8 12:53:30 test kernel: PCI: Probing PCI hardware
Oct 8 12:53:30 test kernel: PCI: Discovered peer bus 01
Oct 8 12:53:30 test kernel: PCI->APIC IRQ transform: (B0,I2,P0) -> 27
Oct 8 12:53:30 test kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 25
Oct 8 12:53:30 test kernel: PCI->APIC IRQ transform: (B0,I15,P0) -> 7
Oct 8 12:53:30 test kernel: PCI->APIC IRQ transform: (B1,I3,P0) -> 28
Oct 8 12:53:30 test kernel: isapnp: Scanning for PnP cards...
Oct 8 12:53:30 test kernel: isapnp: No Plug & Play device found
Oct 8 12:53:30 test kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Oct 8 12:53:30 test kernel: Linux NET4.0 for Linux 2.4
Oct 8 12:53:30 test kernel: Based upon Swansea University Computer Society NET3.039
Oct 8 12:53:30 test kernel: Initializing RT netlink socket
Oct 8 12:53:30 test kernel: apm: BIOS not found.
Oct 8 12:53:30 test kernel: Starting kswapd
Oct 8 12:53:30 test kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
Oct 8 12:53:30 test kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Oct 8 12:53:30 test kernel: Detected PS/2 Mouse Port.
Oct 8 12:53:30 test kernel: pty: 2048 Unix98 ptys configured
Oct 8 12:53:30 test kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Oct 8 12:53:30 test sshd: Starting sshd:
Oct 8 12:53:30 test kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Oct 8 12:53:30 test kernel: Real Time Clock Driver v1.10e
Oct 8 12:53:30 test kernel: oprofile: APIC was already enabled
Oct 8 12:53:30 test kernel: oprofile 0.2 loaded, major 254
Oct 8 12:53:30 test kernel: block: 1024 slots per queue, batch=256
Oct 8 12:53:30 test sshd: execvp: No such file or directory
Oct 8 12:53:30 test kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Oct 8 12:53:30 test sshd: execvp: No such file or directory
Oct 8 12:53:30 test kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 8 12:53:30 test kernel: SvrWks OSB4: IDE controller on PCI bus 00 dev 79
Oct 8 12:53:30 test kernel: SvrWks OSB4: chipset revision 0
Oct 8 12:53:30 test sshd: failed
Oct 8 12:53:30 test kernel: SvrWks OSB4: not 100%% native mode: will probe irqs later
Oct 8 12:53:30 test sshd: ^[[60G
Oct 8 12:53:30 test kernel: ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
Oct 8 12:53:30 test sshd:
Oct 8 12:53:30 test kernel: ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:pio, hdd:pio
Oct 8 12:53:30 test rc: Starting sshd: failed
Oct 8 12:53:30 test kernel: hda: CRN-8241B, ATAPI CD/DVD-ROM drive
Oct 8 12:53:30 test kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 8 12:53:30 test kernel: ide-floppy driver 0.99.newide
Oct 8 12:53:30 test kernel: Floppy drive(s): fd0 is 1.44M
Oct 8 12:53:30 test kernel: FDC 0 is a National Semiconductor PC87306
Oct 8 12:53:30 test kernel: NET4: Frame Diverter 0.46
Oct 8 12:53:30 test kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 8 12:53:30 test kernel: ide-floppy driver 0.99.newide
Oct 8 12:53:30 test kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Oct 8 12:53:30 test kernel: md: Autodetecting RAID arrays.
Oct 8 12:53:30 test kernel: md: autorun ...
Oct 8 12:53:30 test kernel: md: ... autorun DONE.
Oct 8 12:53:30 test kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Oct 8 12:53:30 test kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Oct 8 12:53:30 test kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Oct 8 12:53:30 test kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Oct 8 12:53:30 test kernel: TCP: Hash tables configured (established 262144 bind 65536)
Oct 8 12:53:30 test kernel: Linux IP multicast router 0.06 plus PIM-SM
Oct 8 12:53:30 test kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Oct 8 12:53:30 test kernel: RAMDISK: Compressed image found at block 0
Oct 8 12:53:30 test kernel: Freeing initrd memory: 256k freed
Oct 8 12:53:30 test kernel: VFS: Mounted root (ext2 filesystem).
Oct 8 12:53:30 test kernel: SCSI subsystem driver Revision: 1.00
Oct 8 12:53:30 test kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Oct 8 12:53:30 test kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
Oct 8 12:53:30 test kernel: <Adaptec aic7892 Ultra160 SCSI adapter>
Oct 8 12:53:30 test kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
Oct 8 12:53:30 test kernel:
Oct 8 12:53:30 test kernel: blk: queue c35f0a18, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 12:53:30 test kernel: Vendor: IBM Model: IC35L073UCDY10-0 Rev: S21E
Oct 8 12:53:30 test kernel: Type: Direct-Access ANSI SCSI revision: 03
Oct 8 12:53:30 test kernel: blk: queue c35f0818, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 12:53:30 test kernel: Vendor: IBM Model: IC35L073UCDY10-0 Rev: S21E
Oct 8 12:53:30 test kernel: Type: Direct-Access ANSI SCSI revision: 03
Oct 8 12:53:30 test kernel: blk: queue c35f0418, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 12:53:30 test kernel: Vendor: IBM Model: FTlV1 S2 Rev: 0
Oct 8 12:53:30 test kernel: Type: Processor ANSI SCSI revision: 02
Oct 8 12:53:30 test kernel: blk: queue f7baf218, I/O limit 4095Mb (mask 0xffffffff)
Oct 8 12:53:30 test kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 253
Oct 8 12:53:30 test kernel: scsi0:A:1:0: Tagged Queuing enabled. Depth 253
Oct 8 12:53:30 test kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Oct 8 12:53:30 test kernel: Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Oct 8 12:53:30 test crond: execvp: No such file or directory
Oct 8 12:53:30 test kernel: (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Oct 8 12:53:30 test crond: crond startup failed
Oct 8 12:53:30 test kernel: SCSI device sda: 143374805 512-byte hdwr sectors (73408 MB)
Oct 8 12:53:30 test kernel: Partition check:
Oct 8 12:53:30 test kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Oct 8 12:53:30 test kernel: (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Oct 8 12:53:30 test kernel: SCSI device sdb: 143374805 512-byte hdwr sectors (73408 MB)
Oct 8 12:53:30 test kernel: sdb: sdb1
Oct 8 12:53:30 test kernel: Journalled Block Device driver loaded
Oct 8 12:53:30 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 12:53:30 test kernel: EXT3-fs: mounted filesystem with ordered data mode.
Oct 8 12:53:30 test kernel: Freeing unused kernel memory: 240k freed
Oct 8 12:53:30 test kernel: usb.c: registered new driver usbdevfs
Oct 8 12:53:30 test kernel: usb.c: registered new driver hub
Oct 8 12:53:30 test kernel: usb-ohci.c: USB OHCI at membase 0xf88aa000, IRQ 7
Oct 8 12:53:30 test kernel: usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
Oct 8 12:53:31 test kernel: usb.c: new USB bus registered, assigned bus number 1
Oct 8 12:53:31 test kernel: hub.c: USB hub found
Oct 8 12:53:31 test kernel: hub.c: 2 ports detected
Oct 8 12:53:31 test kernel: usb.c: registered new driver hiddev
Oct 8 12:53:31 test kernel: usb.c: registered new driver hid
Oct 8 12:53:31 test kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Oct 8 12:53:31 test kernel: hid-core.c: USB HID support drivers
Oct 8 12:53:31 test kernel: mice: PS/2 mouse device teston for all mice
Oct 8 12:53:31 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,1), internal journal
Oct 8 12:53:31 test kernel: Adding Swap: 1052248k swap-space (priority -1)
Oct 8 12:53:31 test kernel: kjournald starting. testit interval 5 seconds
Oct 8 12:53:31 test kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on sd(8,17), internal journal
O