Linux 서버 원인불명
글쓴이: just0122 / 작성시간: 금, 2003/04/11 - 11:31오전
레드햇 리눅스 8.0 을 HP 380 dell 2650 2대에 설치를 했는데..
이상하게 하루에 한두번 시스템이 2대다 다운 현상이 발생.
텔넷이며 아파치 데몬 등 각종 데몬이 close
모니터 화면까지 나오질 않아염...
아무리 모니터링을 해도.. 시스템에 큰 문제는 없는듯 싶은데..
원인이 무언지 잘 모르겠습니다...
아시는 분은 좀 알려주세염....
Forums:
로그파일에 뭔가 로그가 남지 않습니까?
로그에 뭔가 이상한 징후가 기록되거나 혹은 dmesg에 뭔가 이상한 점은 없었나요? 분명 뭔가가 남지 않았을까 생각됩니다.
message 로그를 한번 살펴보시고, 이상한게 있으면 올려주세요.
========================================
* The truth will set you free.
dmesg
per-CPU timeslice cutoff: 1462.51 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/6 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5573.87 BogoMIPS
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Total of 2 processors activated (11112.34 BogoMIPS).
WARNING: No sibling found for CPU 0.
WARNING: No sibling found for CPU 1.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
Setting 3 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 3 ... ok.
Setting 4 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 4 ... ok.
Setting 5 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 5 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
number of IO-APIC #4 registers: 16.
number of IO-APIC #5 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 002 02 0 0 0 0 0 1 1 31
03 003 03 1 1 0 1 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 1 1 0 1 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 1 1 0 1 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 1 1 0 1 0 1 1 71
0a 003 03 1 1 0 1 0 1 1 79
0b 003 03 1 1 0 1 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 0 0 0 0 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 1 1 0 1 0 1 1 A1
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 03000000
....... : arbitration: 03
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 05000000
....... : arbitration: 05
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2788.1395 MHz.
..... host bus clock speed is 99.1165 MHz.
cpu: 0, clocks: 194512, slice: 64837
CPU0<T0:194512,T1:129664,D:11,S:64837,C:194512>
cpu: 1, clocks: 194512, slice: 64837
CPU1<T0:194512,T1:64832,D:6,S:64837,C:194512>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 01
PCI: Discovered peer bus 02
PCI: Discovered peer bus 06
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:02 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:7b not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:82 not found by BIOS
PCI: Device 00:88 not found by BIOS
PCI: Device 00:8a not found by BIOS
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
oprofile: can't get RTC I/O Ports
block: 1024 slots per queue, batch=256
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks CSB5: IDE controller on PCI bus 00 dev 79
SvrWks CSB5: chipset revision 147
SvrWks CSB5: not 100% native mode: will probe irqs later
SvrWks CSB5: simplex device: DMA forced
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
SvrWks CSB5: simplex device: DMA forced
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.4
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 216k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Compaq CISS Driver (v 2.4.30)
cciss: Device 0xb178 has been found at bus 1 dev 3 func 0
cciss: using DAC cycles
blocks= 142253280 block_size= 512
heads= 255, sectors= 32, cylinders= 17433
blk: queue c042e400, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 240k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf887c000, IRQ 7
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,1), internal journal
Adding Swap: 2513256k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
microcode: CPU1 no microcode found! (sig=f27, pflags=2)
microcode: CPU0 no microcode found! (sig=f27, pflags=2)
ohci1394: pci_module_init failed
ip_tables: (C) 2000-2002 Netfilter core team
tg3.c:v1.0 (Jul 19, 2002)
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b9
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b8
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
message log파일입니다.
Apr 6 04:02:01 test-server syslogd 1.4.1: restart.
Apr 6 04:03:30 test-server su(pam_unix)[29225]: session opened for user news by (uid=0)
Apr 6 04:03:30 test-server su(pam_unix)[29225]: session closed for user news
Apr 7 08:52:20 test-server syslogd 1.4.1: restart.
Apr 7 08:52:20 test-server syslog: syslogd startup succeeded
Apr 7 08:52:20 test-server kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 7 08:52:20 test-server kernel: Linux version 2.4.18-14smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002
Apr 7 08:52:20 test-server kernel: BIOS-provided physical RAM map:
Apr 7 08:52:20 test-server kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 0000000000100000 - 000000003fffa000 (usable)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 000000003fffa000 - 0000000040000000 (ACPI data)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Apr 7 08:52:20 test-server kernel: BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Apr 7 08:52:20 test-server kernel: 127MB HIGHMEM available.
Apr 7 08:52:20 test-server syslog: klogd startup succeeded
Apr 7 08:52:20 test-server kernel: 896MB LOWMEM available.
Apr 7 08:52:20 test-server kernel: found SMP MP-table at 000f4fd0
Apr 7 08:52:20 test-server portmap: portmap startup succeeded
Apr 7 08:52:20 test-server kernel: hm, page 000f4000 reserved twice.
Apr 7 08:52:20 test-server kernel: hm, page 000f5000 reserved twice.
Apr 7 08:52:20 test-server kernel: hm, page 000f2000 reserved twice.
Apr 7 08:52:20 test-server rpc.statd[610]: Version 1.0.1 Starting
Apr 7 08:52:20 test-server nfslock: rpc.statd startup succeeded
Apr 7 08:52:20 test-server kernel: hm, page 000f3000 reserved twice.
Apr 7 08:52:20 test-server keytable: Loading keymap:
Apr 7 08:52:20 test-server kernel: On node 0 totalpages: 262138
Apr 7 08:52:20 test-server keytable:
Apr 7 08:52:20 test-server kernel: zone(0): 4096 pages.
Apr 7 08:52:20 test-server keytable:
Apr 7 08:52:20 test-server kernel: zone(1): 225280 pages.
Apr 7 08:52:20 test-server rc: Starting keytable: succeeded
Apr 7 08:52:20 test-server kernel: zone(2): 32762 pages.
Apr 7 08:52:20 test-server kernel: ACPI: Searched entire block, no RSDP was found.
Apr 7 08:52:20 test-server random: Initializing random number generator: succeeded
Apr 7 08:52:20 test-server kernel: ACPI: RSDP located at physical address c00f4f70
Apr 7 08:52:21 test-server kernel: RSD PTR v0 [COMPAQ]
Apr 7 08:52:21 test-server pcmcia: Starting PCMCIA services:
Apr 7 08:52:21 test-server kernel: __va_range(0x3fffa000, 0x68): idx=8 mapped at ffff6000
Apr 7 08:52:21 test-server pcmcia: modulesHint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
Apr 7 08:52:21 test-server kernel: ACPI table found: RSDT v1 [COMPAQ P29 0.2]
Apr 7 08:52:21 test-server pcmcia: You may find more information in syslog or the output from dmesg
Apr 7 08:52:21 test-server kernel: __va_range(0x3fffa040, 0x24): idx=8 mapped at ffff6000
Apr 7 08:52:21 test-server cardmgr[662]: starting, version is 3.1.31
Apr 7 08:52:21 test-server pcmcia: /lib/modules/2.4.18-14smp/pcmcia/tcic.o: init_module: No such device
Apr 7 08:52:21 test-server kernel: __va_range(0x3fffa040, 0x74): idx=8 mapped at ffff6000
Apr 7 08:52:21 test-server pcmcia: /lib/modules/2.4.18-14smp/pcmcia/ds.o: init_module: Operation not permitted
Apr 7 08:52:21 test-server cardmgr[662]: config error, file 'config' line 1053: syntax error
Apr 7 08:52:21 test-server kernel: ACPI table found: FACP v1 [COMPAQ P29 0.2]
Apr 7 08:52:21 test-server pcmcia: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
Apr 7 08:52:21 test-server cardmgr[662]: config error, file 'config' line 2129: no function bindings
Apr 7 08:52:21 test-server kernel: __va_range(0x3fffa100, 0x24): idx=8 mapped at ffff6000
Apr 7 08:52:21 test-server pcmcia: You may find more information in syslog or the output from dmesg
Apr 7 08:52:21 test-server cardmgr[662]: no pcmcia driver in /proc/devices
Apr 7 08:52:21 test-server kernel: __va_range(0x3fffa100, 0xac): idx=8 mapped at ffff6000
Apr 7 08:52:21 test-server pcmcia: cardmgr.
Apr 7 08:52:21 test-server cardmgr[662]: exiting
Apr 7 08:52:21 test-server kernel: ACPI table found: APIC v1 [COMPAQ 00000083 0.2]
Apr 7 08:52:21 test-server rc: Starting pcmcia: succeeded
Apr 7 08:52:21 test-server kernel: __va_range(0x3fffa100, 0xac): idx=8 mapped at ffff6000
Apr 7 08:52:21 test-server kernel: LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
Apr 7 08:52:21 test-server kernel: CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 08:52:22 test-server kernel:
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0002] id[0x2] enabled[0])
Apr 7 08:52:22 test-server netfs: Mounting other filesystems: succeeded
Apr 7 08:52:22 test-server kernel: CPU 1 (0x0200) disabled
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0004] id[0x4] enabled[0])
Apr 7 08:52:22 test-server kernel: CPU 2 (0x0400) disabled
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0006] id[0x6] enabled[1])
Apr 7 08:52:22 test-server autofs: automount startup succeeded
Apr 7 08:52:22 test-server kernel: CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 08:52:22 test-server sshd: Starting sshd:
Apr 7 08:52:22 test-server kernel:
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0001] id[0x1] enabled[1])
Apr 7 08:52:22 test-server kernel: CPU 4 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 08:52:22 test-server kernel:
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0003] id[0x3] enabled[0])
Apr 7 08:52:22 test-server kernel: CPU 5 (0x0300) disabled
Apr 7 08:52:00 test-server rc.sysinit: Mounting proc filesystem: succeeded
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0005] id[0x5] enabled[0])
Apr 7 08:52:00 test-server rc.sysinit: Unmounting initrd: succeeded
Apr 7 08:52:22 test-server kernel: CPU 6 (0x0500) disabled
Apr 7 08:52:00 test-server sysctl: net.ipv4.ip_forward = 0
Apr 7 08:52:22 test-server kernel: LAPIC (acpi_id[0x0007] id[0x7] enabled[1])
Apr 7 08:52:22 test-server sshd: succeeded
Apr 7 08:52:00 test-server sysctl: net.ipv4.conf.default.rp_filter = 1
Apr 7 08:52:23 test-server kernel: CPU 7 (0x0700) enabledProcessor #7 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 08:52:23 test-server sshd: ^[[60G[
Apr 7 08:52:00 test-server sysctl: kernel.sysrq = 0
Apr 7 08:52:23 test-server kernel:
Apr 7 08:52:23 test-server sshd:
Apr 7 08:52:00 test-server sysctl: kernel.core_uses_pid = 1
Apr 7 08:52:23 test-server kernel: IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
Apr 7 08:52:23 test-server rc: Starting sshd: succeeded
Apr 7 08:52:00 test-server rc.sysinit: Configuring kernel parameters: succeeded
Apr 7 08:52:23 test-server kernel: IOAPIC (id[0x3] address[0xfec01000] global_irq_base[0x10])
Apr 7 08:52:00 test-server date: Mon Apr 7 08:51:54 KST 2003
Apr 7 08:52:23 test-server kernel: IOAPIC (id[0x4] address[0xfec02000] global_irq_base[0x20])
Apr 7 08:52:00 test-server rc.sysinit: Setting clock (localtime): Mon Apr 7 08:51:54 KST 2003 succeeded
Apr 7 08:52:23 test-server kernel: IOAPIC (id[0x5] address[0xfec03000] global_irq_base[0x30])
Apr 7 08:52:00 test-server rc.sysinit: Loading default keymap succeeded
Apr 7 08:52:23 test-server kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])
Apr 7 08:52:00 test-server rc.sysinit: Setting default font (lat0-sun16): succeeded
Apr 7 08:52:23 test-server kernel: LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1])
Apr 7 08:52:00 test-server rc.sysinit: Setting hostname test-server: succeeded
Apr 7 08:52:23 test-server kernel: 8 CPUs total
Apr 7 08:52:00 test-server rc.sysinit: Initializing USB controller (usb-ohci): succeeded
Apr 7 08:52:23 test-server kernel: Local APIC address fee00000
Apr 7 08:52:00 test-server rc.sysinit: Mounting USB filesystem: succeeded
Apr 7 08:52:23 test-server kernel: __va_range(0x3fffa1c0, 0x24): idx=8 mapped at ffff6000
Apr 7 08:52:00 test-server rc.sysinit: Initializing USB HID interface: succeeded
Apr 7 08:52:23 test-server kernel: __va_range(0x3fffa1c0, 0x50): idx=8 mapped at ffff6000
Apr 7 08:52:00 test-server rc.sysinit: Initializing USB keyboard: succeeded
Apr 7 08:52:24 test-server kernel: ACPI table found: SPCR v1 [COMPAQ SPCRRBSU 0.1]
Apr 7 08:52:00 test-server rc.sysinit: Initializing USB mouse: succeeded
Apr 7 08:52:24 test-server kernel: Enabling the CPU's according to the ACPI table
Apr 7 08:52:00 test-server fsck: /: clean, 223166/1281696 files, 1318960/2560196 blocks
Apr 7 08:52:24 test-server kernel: Intel MultiProcessor Specification v1.4
Apr 7 08:52:00 test-server rc.sysinit: Checking root filesystem succeeded
Apr 7 08:52:24 test-server kernel: Virtual Wire compatibility mode.
Apr 7 08:52:00 test-server rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Apr 7 08:52:24 test-server kernel: OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Apr 7 08:52:00 test-server rc.sysinit: Activating swap partitions: succeeded
Apr 7 08:52:24 test-server kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Apr 7 08:52:01 test-server rc.sysinit: Finding module dependencies: succeeded
Apr 7 08:52:24 test-server kernel: I/O APIC #3 Version 17 at 0xFEC01000.
Apr 7 08:52:01 test-server fsck: /data: recovering journal
Apr 7 08:52:24 test-server kernel: I/O APIC #4 Version 17 at 0xFEC02000.
Apr 7 08:52:03 test-server fsck: /data: clean, 2449/2436448 files, 403300/4864380 blocks
Apr 7 08:52:24 test-server kernel: I/O APIC #5 Version 17 at 0xFEC03000.
Apr 7 08:52:03 test-server fsck: /home: recovering journal
Apr 7 08:52:24 test-server kernel: Processors: 4
Apr 7 08:52:04 test-server fsck: /home: clean, 136599/2436448 files, 1230225/4864380 blocks
Apr 7 08:52:24 test-server kernel: Kernel command line: ro root=LABEL=/
Apr 7 08:52:04 test-server fsck: /homepage: recovering journal
Apr 7 08:52:24 test-server kernel: Initializing CPU#0
Apr 7 08:52:05 test-server fsck: /homepage: clean, 598/2436448 files, 551677/4864376 blocks
Apr 7 08:52:05 test-server rc.sysinit: Checking filesystems succeeded
Apr 7 08:52:24 test-server kernel: Detected 2789.412 MHz processor.
Apr 7 08:52:06 test-server rc.sysinit: Mounting local filesystems: succeeded
Apr 7 08:52:24 test-server kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Apr 7 08:52:06 test-server rc.sysinit: Enabling local filesystem quotas: succeeded
Apr 7 08:52:24 test-server kernel: Console: colour VGA+ 80x25
Apr 7 08:52:06 test-server rc.sysinit: Enabling swap space: succeeded
Apr 7 08:52:25 test-server kernel: Calibrating delay loop... 5539.46 BogoMIPS
Apr 7 08:52:08 test-server init: Entering runlevel: 3
Apr 7 08:52:25 test-server kernel: Memory: 1026884k/1048552k available (1451k kernel code, 18084k reserved, 1067k data, 240k init, 131048k highmem)
Apr 7 08:52:08 test-server microcode_ctl: microcode_ctl startup succeeded
Apr 7 08:52:25 test-server kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 7 08:52:08 test-server kudzu: Updating /etc/fstab succeeded
Apr 7 08:52:25 test-server kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Apr 7 08:52:15 test-server kudzu: succeeded
Apr 7 08:52:25 test-server kernel: Mount cache hash table entries: 16384 (order: 5, 131072 bytes)
Apr 7 08:52:15 test-server rc: Starting ip6tables: succeeded
Apr 7 08:52:15 test-server rc: Starting iptables: succeeded
Apr 7 08:52:15 test-server sysctl: net.ipv4.ip_forward = 0
Apr 7 08:52:15 test-server sysctl: net.ipv4.conf.default.rp_filter = 1
Apr 7 08:52:25 test-server kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 7 08:52:15 test-server sysctl: kernel.sysrq = 0
Apr 7 08:52:25 test-server kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Apr 7 08:52:15 test-server sysctl: kernel.core_uses_pid = 1
Apr 7 08:52:15 test-server network: Setting network parameters: succeeded
Apr 7 08:52:25 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 08:52:15 test-server network: Bringing up loopback interface: succeeded
Apr 7 08:52:25 test-server kernel: CPU: L2 cache: 512K
Apr 7 08:52:18 test-server network: Bringing up interface eth0: succeeded
Apr 7 08:52:25 test-server kernel: CPU: Physical Processor ID: 0
Apr 7 08:52:20 test-server network: Bringing up interface eth1: succeeded
Apr 7 08:52:25 test-server kernel: Intel machine check architecture supported.
Apr 7 08:52:25 test-server kernel: Intel machine check reporting enabled on CPU#0.
Apr 7 08:52:26 test-server kernel: Enabling fast FPU save and restore... done.
Apr 7 08:52:26 test-server kernel: Enabling unmasked SIMD FPU exception support... done.
Apr 7 08:52:26 test-server kernel: Checking 'hlt' instruction... OK.
Apr 7 08:52:26 test-server kernel: POSIX conformance testing by UNIFIX
Apr 7 08:52:26 test-server kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Apr 7 08:52:26 test-server kernel: mtrr: detected mtrr type: Intel
Apr 7 08:52:26 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 08:52:26 test-server kernel: CPU: L2 cache: 512K
Apr 7 08:52:26 test-server kernel: CPU: Physical Processor ID: 0
Apr 7 08:52:26 test-server kernel: Intel machine check reporting enabled on CPU#0.
Apr 7 08:52:26 test-server kernel: CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 08:52:26 test-server kernel: per-CPU timeslice cutoff: 1463.05 usecs.
Apr 7 08:52:26 test-server kernel: task migration cache decay timeout: 1 msecs.
Apr 7 08:52:26 test-server kernel: enabled ExtINT on CPU#0
Apr 7 08:52:26 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 08:52:26 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 08:52:26 test-server kernel: Booting processor 1/1 eip 2000
Apr 7 08:52:26 test-server kernel: Initializing CPU#1
Apr 7 08:52:26 test-server kernel: masked ExtINT on CPU#1
Apr 7 08:52:26 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 08:52:26 test-server xinetd: xinetd startup succeeded
Apr 7 08:52:26 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 08:52:26 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 7 08:52:26 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 08:52:26 test-server kernel: CPU: L2 cache: 512K
Apr 7 08:52:26 test-server kernel: CPU: Physical Processor ID: 0
Apr 7 08:52:26 test-server kernel: Intel machine check reporting enabled on CPU#1.
Apr 7 08:52:26 test-server kernel: CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 08:52:26 test-server kernel: Booting processor 2/6 eip 2000
Apr 7 08:52:26 test-server kernel: Initializing CPU#2
Apr 7 08:52:26 test-server kernel: masked ExtINT on CPU#2
Apr 7 08:52:26 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 08:52:26 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 08:52:27 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 7 08:52:27 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 08:52:27 test-server kernel: CPU: L2 cache: 512K
Apr 7 08:52:27 test-server kernel: CPU: Physical Processor ID: 3
Apr 7 08:52:27 test-server kernel: Intel machine check reporting enabled on CPU#2.
Apr 7 08:52:27 test-server kernel: CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 08:52:27 test-server kernel: Booting processor 3/7 eip 2000
Apr 7 08:52:27 test-server kernel: Initializing CPU#3
Apr 7 08:52:27 test-server kernel: masked ExtINT on CPU#3
Apr 7 08:52:27 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 08:52:27 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 08:52:27 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 7 08:52:27 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 08:52:27 test-server kernel: CPU: L2 cache: 512K
Apr 7 08:52:27 test-server kernel: CPU: Physical Processor ID: 3
Apr 7 08:52:27 test-server kernel: Intel machine check reporting enabled on CPU#3.
Apr 7 08:52:27 test-server kernel: CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 08:52:27 test-server kernel: Total of 4 processors activated (22259.09 BogoMIPS).
Apr 7 08:52:27 test-server kernel: cpu_sibling_map[0] = 1
Apr 7 08:52:27 test-server kernel: cpu_sibling_map[1] = 0
Apr 7 08:52:27 test-server kernel: cpu_sibling_map[2] = 3
Apr 7 08:52:27 test-server kernel: cpu_sibling_map[3] = 2
Apr 7 08:52:27 test-server kernel: ENABLING IO-APIC IRQs
Apr 7 08:52:27 test-server kernel: Setting 2 in the phys_id_present_map
Apr 7 08:52:27 test-server kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Apr 7 08:52:27 test-server kernel: Setting 3 in the phys_id_present_map
Apr 7 08:52:27 test-server kernel: ...changing IO-APIC physical APIC ID to 3 ... ok.
Apr 7 08:52:27 test-server kernel: Setting 4 in the phys_id_present_map
Apr 7 08:52:27 test-server kernel: ...changing IO-APIC physical APIC ID to 4 ... ok.
Apr 7 08:52:27 test-server kernel: Setting 5 in the phys_id_present_map
Apr 7 08:52:27 test-server kernel: ...changing IO-APIC physical APIC ID to 5 ... ok.
Apr 7 08:52:27 test-server kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Apr 7 08:52:27 test-server kernel: testing the IO APIC.......................
Apr 7 08:52:27 test-server kernel:
Apr 7 08:52:28 test-server last message repeated 3 times
Apr 7 08:52:28 test-server kernel: .................................... done.
Apr 7 08:52:28 test-server kernel: Using local APIC timer interrupts.
Apr 7 08:52:28 test-server kernel: calibrating APIC timer ...
Apr 7 08:52:28 test-server kernel: ..... CPU clock speed is 2788.1947 MHz.
Apr 7 08:52:28 test-server kernel: ..... host bus clock speed is 99.1185 MHz.
Apr 7 08:52:28 test-server kernel: cpu: 0, clocks: 194532, slice: 38906
Apr 7 08:52:28 test-server kernel: CPU0<T0:194528,T1:155616,D:6,S:38906,C:194532>
Apr 7 08:52:28 test-server kernel: cpu: 1, clocks: 194532, slice: 38906
Apr 7 08:52:28 test-server kernel: cpu: 3, clocks: 194532, slice: 38906
Apr 7 08:52:28 test-server kernel: cpu: 2, clocks: 194532, slice: 38906
Apr 7 08:52:28 test-server kernel: CPU1<T0:194528,T1:116704,D:12,S:38906,C:194532>
Apr 7 08:52:28 test-server kernel: CPU2<T0:194528,T1:77808,D:2,S:38906,C:194532>
Apr 7 08:52:28 test-server kernel: CPU3<T0:194528,T1:38896,D:8,S:38906,C:194532>
Apr 7 08:52:28 test-server kernel: checking TSC synchronization across CPUs: passed.
Apr 7 08:52:28 test-server kernel: migration_task 0 on cpu=0
Apr 7 08:52:28 test-server kernel: migration_task 1 on cpu=1
Apr 7 08:52:28 test-server kernel: migration_task 2 on cpu=2
Apr 7 08:52:28 test-server kernel: migration_task 3 on cpu=3
Apr 7 08:52:28 test-server kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Apr 7 08:52:28 test-server kernel: mtrr: probably your BIOS does not setup all CPUs
Apr 7 08:52:28 test-server kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
Apr 7 08:52:28 test-server kernel: PCI: Using configuration type 1
Apr 7 08:52:28 test-server kernel: PCI: Probing PCI hardware
Apr 7 08:52:28 test-server kernel: PCI: Discovered peer bus 01
Apr 7 08:52:28 test-server kernel: PCI: Discovered peer bus 02
Apr 7 08:52:28 test-server kernel: PCI: Discovered peer bus 06
Apr 7 08:52:28 test-server kernel: PCI: Device 00:00 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:01 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:02 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:78 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:7b not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:80 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:82 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:88 not found by BIOS
Apr 7 08:52:28 test-server kernel: PCI: Device 00:8a not found by BIOS
Apr 7 08:52:28 test-server kernel: isapnp: Scanning for PnP cards...
Apr 7 08:52:28 test-server kernel: isapnp: No Plug & Play device found
Apr 7 08:52:28 test-server kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Apr 7 08:52:28 test-server kernel: Linux NET4.0 for Linux 2.4
Apr 7 08:52:28 test-server kernel: Based upon Swansea University Computer Society NET3.039
Apr 7 08:52:28 test-server kernel: Initializing RT netlink socket
Apr 7 08:52:28 test-server xinetd[745]: xinetd Version 2.3.7 started with libwrap options compiled in.
Apr 7 08:52:28 test-server kernel: apm: BIOS not found.
Apr 7 08:52:28 test-server xinetd[745]: Started working: 4 available services
Apr 7 08:52:28 test-server kernel: Starting kswapd
Apr 7 08:52:28 test-server kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
Apr 7 08:52:28 test-server kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Apr 7 08:52:28 test-server kernel: pty: 2048 Unix98 ptys configured
Apr 7 08:52:28 test-server kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 7 08:52:29 test-server kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Apr 7 08:52:29 test-server kernel: Real Time Clock Driver v1.10e
Apr 7 08:52:29 test-server kernel: oprofile: can't get RTC I/O Ports
Apr 7 08:52:29 test-server kernel: block: 1024 slots per queue, batch=256
Apr 7 08:52:29 test-server kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Apr 7 08:52:29 test-server kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 7 08:52:29 test-server kernel: SvrWks CSB5: IDE controller on PCI bus 00 dev 79
Apr 7 08:52:29 test-server kernel: SvrWks CSB5: chipset revision 147
Apr 7 08:52:29 test-server kernel: SvrWks CSB5: not 100%% native mode: will probe irqs later
Apr 7 08:52:29 test-server sendmail: sendmail startup succeeded
Apr 7 08:52:29 test-server kernel: SvrWks CSB5: simplex device: DMA forced
Apr 7 08:52:29 test-server kernel: ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
Apr 7 08:52:29 test-server sendmail: sm-client startup succeeded
Apr 7 08:52:29 test-server kernel: SvrWks CSB5: simplex device: DMA forced
Apr 7 08:52:29 test-server kernel: ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
Apr 7 08:52:29 test-server kernel: hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
Apr 7 08:52:29 test-server kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 7 08:52:29 test-server kernel: ide-floppy driver 0.99.newide
Apr 7 08:52:29 test-server kernel: Floppy drive(s): fd0 is 1.44M
Apr 7 08:52:29 test-server privoxy: Apr 07 08:52:29 Privoxy(08192) Info: loading configuration file '/etc/privoxy/config':
Apr 7 08:52:29 test-server kernel: FDC 0 is a National Semiconductor PC87306
Apr 7 08:52:29 test-server kernel: NET4: Frame Diverter 0.46
Apr 7 08:52:29 test-server kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Apr 7 08:52:29 test-server kernel: ide-floppy driver 0.99.newide
Apr 7 08:52:29 test-server kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Apr 7 08:52:29 test-server kernel: md: Autodetecting RAID arrays.
Apr 7 08:52:29 test-server kernel: md: autorun ...
Apr 7 08:52:29 test-server kernel: md: ... autorun DONE.
Apr 7 08:52:29 test-server kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Apr 7 08:52:29 test-server kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 7 08:52:29 test-server kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Apr 7 08:52:29 test-server kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Apr 7 08:52:29 test-server kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr 7 08:52:29 test-server kernel: Linux IP multicast router 0.06 plus PIM-SM
Apr 7 08:52:29 test-server kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Apr 7 08:52:30 test-server kernel: RAMDISK: Compressed image found at block 0
Apr 7 08:52:30 test-server kernel: Freeing initrd memory: 216k freed
Apr 7 08:52:30 test-server kernel: VFS: Mounted root (ext2 filesystem).
Apr 7 08:52:30 test-server kernel: SCSI subsystem driver Revision: 1.00
Apr 7 08:52:30 test-server kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Apr 7 08:52:30 test-server kernel: Compaq CISS Driver (v 2.4.30)
Apr 7 08:52:30 test-server kernel: cciss: using DAC cycles
Apr 7 08:52:30 test-server kernel: blocks= 142253280 block_size= 512
Apr 7 08:52:30 test-server kernel: heads= 255, sectors= 32, cylinders= 17433
Apr 7 08:52:30 test-server kernel:
Apr 7 08:52:30 test-server kernel: blk: queue c042e400, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Apr 7 08:52:30 test-server kernel: Partition check:
Apr 7 08:52:30 test-server kernel: cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
Apr 7 08:52:30 test-server kernel: Journalled Block Device driver loaded
Apr 7 08:52:30 test-server kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Apr 7 08:52:30 test-server kernel: EXT3-fs: write access will be enabled during recovery.
Apr 7 08:52:30 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 08:52:30 test-server kernel: EXT3-fs: recovery complete.
Apr 7 08:52:30 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 08:52:30 test-server kernel: Freeing unused kernel memory: 240k freed
Apr 7 08:52:30 test-server kernel: usb.c: registered new driver usbdevfs
Apr 7 08:52:30 test-server kernel: usb.c: registered new driver hub
Apr 7 08:52:30 test-server kernel: usb-ohci.c: USB OHCI at membase 0xf887c000, IRQ 7
Apr 7 08:52:30 test-server kernel: usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
Apr 7 08:52:30 test-server kernel: usb.c: new USB bus registered, assigned bus number 1
Apr 7 08:52:30 test-server kernel: hub.c: USB hub found
Apr 7 08:52:30 test-server kernel: hub.c: 4 ports detected
Apr 7 08:52:30 test-server kernel: usb.c: registered new driver hiddev
Apr 7 08:52:30 test-server kernel: usb.c: registered new driver hid
Apr 7 08:52:30 test-server kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Apr 7 08:52:30 test-server kernel: hid-core.c: USB HID support drivers
Apr 7 08:52:30 test-server kernel: mice: PS/2 mouse device common for all mice
Apr 7 08:52:30 test-server privoxy: privoxy startup succeeded
Apr 7 08:52:30 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,1), internal journal
Apr 7 08:52:30 test-server kernel: Adding Swap: 2513256k swap-space (priority -1)
Apr 7 08:52:30 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 08:52:30 test-server gpm: gpm startup succeeded
Apr 7 08:52:30 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,2), internal journal
Apr 7 08:52:30 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 08:52:30 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 08:52:30 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,3), internal journal
Apr 7 08:52:30 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 08:52:30 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 08:52:30 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,5), internal journal
Apr 7 08:52:30 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 08:52:30 test-server kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Apr 7 08:52:30 test-server kernel: microcode: CPU1 no microcode found! (sig=f27, pflags=2)
Apr 7 08:52:30 test-server kernel: microcode: CPU3 no microcode found! (sig=f27, pflags=2)
Apr 7 08:52:30 test-server kernel: microcode: CPU2 no microcode found! (sig=f27, pflags=2)
Apr 7 08:52:31 test-server kernel: microcode: CPU0 no microcode found! (sig=f27, pflags=2)
Apr 7 08:52:31 test-server kernel: ohci1394: pci_module_init failed
Apr 7 08:52:31 test-server kernel: ip_tables: (C) 2000-2002 Netfilter core team
Apr 7 08:52:31 test-server kernel: tg3.c:v1.0 (Jul 19, 2002)
Apr 7 08:52:31 test-server kernel: eth0: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b9
Apr 7 08:52:31 test-server kernel: eth1: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b8
Apr 7 08:52:31 test-server kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Apr 7 08:52:31 test-server kernel: tg3: eth0: Flow control is off for TX and off for RX.
Apr 7 08:52:31 test-server kernel: Linux Kernel Card Services 3.1.22
Apr 7 08:52:31 test-server kernel: options: [pci] [cardbus] [pm]
Apr 7 08:52:31 test-server kernel: Databook TCIC-2 PCMCIA probe: not found.
Apr 7 08:52:31 test-server kernel: ds: no socket drivers loaded!
Apr 7 08:52:31 test-server canna: cannaserver startup succeeded
Apr 7 08:52:31 test-server crond: crond startup succeeded
Apr 7 08:52:32 test-server xfs: listening on port 7100
Apr 7 08:52:32 test-server xfs: xfs startup succeeded
Apr 7 08:52:32 test-server anacron: anacron startup succeeded
Apr 7 08:52:32 test-server atd: atd startup succeeded
Apr 7 08:52:32 test-server wine: Registering binary handler for Windows applications
Apr 7 08:52:33 test-server rc: Starting wine: succeeded
Apr 7 08:52:33 test-server rc: Starting mdmonitor: succeeded
Apr 7 09:29:24 test-server login(pam_unix)[1065]: check pass; user unknown
Apr 7 09:29:24 test-server login(pam_unix)[1065]: authentication failure; logname= uid=0 euid=0 tty=pts/0 ruser= rhost=61.74.194.138
Apr 7 09:29:26 test-server login[1065]: FAILED LOGIN 1 FROM 61.74.194.138 FOR hns^H^H, Authentication failure
Apr 7 09:29:30 test-server login(pam_unix)[1065]: session opened for user test-server by (uid=0)
Apr 7 09:29:30 test-server -- test-server[1065]: LOGIN ON pts/0 BY test-server FROM 61.74.194.138
Apr 7 09:39:09 test-server login(pam_unix)[1142]: session opened for user test-server by (uid=0)
Apr 7 09:39:09 test-server -- test-server[1142]: LOGIN ON pts/1 BY test-server FROM 61.74.194.137
Apr 7 09:39:12 test-server su(pam_unix)[1183]: authentication failure; logname=test-server uid=501 euid=0 tty= ruser=test-server rhost= user=root
Apr 7 09:39:17 test-server su(pam_unix)[1184]: session opened for user root by test-server(uid=501)
Apr 7 09:39:19 test-server su(pam_unix)[1217]: session opened for user root by test-server(uid=0)
Apr 7 09:44:04 test-server sshd(pam_unix)[1274]: session opened for user sexrg by (uid=504)
Apr 7 09:44:28 test-server su(pam_unix)[1301]: session opened for user root by sexrg(uid=504)
Apr 7 09:44:40 test-server su(pam_unix)[1331]: session opened for user postgres by sexrg(uid=0)
Apr 7 09:49:14 test-server sshd(pam_unix)[1608]: session opened for user sexrg by (uid=504)
Apr 7 09:50:17 test-server su(pam_unix)[1645]: session opened for user root by sexrg(uid=504)
Apr 7 09:59:00 test-server su(pam_unix)[2104]: session opened for user news by (uid=0)
Apr 7 09:59:00 test-server su(pam_unix)[2104]: session closed for user news
Apr 7 10:04:09 test-server sshd(pam_unix)[2308]: session opened for user test-server by (uid=501)
Apr 7 10:04:19 test-server su(pam_unix)[2354]: session opened for user root by test-server(uid=501)
Apr 7 10:04:23 test-server su(pam_unix)[2392]: session opened for user postgres by test-server(uid=0)
Apr 7 10:04:25 test-server su(pam_unix)[2392]: session closed for user postgres
Apr 7 10:05:39 test-server su(pam_unix)[2443]: session opened for user postgres by test-server(uid=0)
Apr 7 10:06:45 test-server sshd(pam_unix)[1274]: session closed for user sexrg
Apr 7 10:06:45 test-server su(pam_unix)[1331]: session closed for user postgres
Apr 7 10:06:45 test-server su(pam_unix)[1301]: session closed for user root
Apr 7 10:06:51 test-server sshd(pam_unix)[1608]: session closed for user sexrg
Apr 7 10:06:51 test-server su(pam_unix)[1645]: session closed for user root
Apr 7 10:07:36 test-server su(pam_unix)[2443]: session closed for user postgres
Apr 7 10:17:18 test-server sshd(pam_unix)[2850]: session opened for user sexrg by (uid=504)
Apr 7 10:18:18 test-server su(pam_unix)[2887]: session opened for user root by sexrg(uid=504)
Apr 7 10:22:36 test-server su(pam_unix)[2354]: session closed for user root
Apr 7 10:22:43 test-server sshd(pam_unix)[2308]: session closed for user test-server
Apr 7 10:38:08 test-server login(pam_unix)[932]: session opened for user root by LOGIN(uid=0)
Apr 7 10:38:08 test-server -- root[932]: ROOT LOGIN ON tty1
Apr 7 10:38:24 test-server kernel: keyboard: unrecognized scancode (72) - ignored
Apr 7 11:07:23 test-server sshd(pam_unix)[3239]: session opened for user sexrg by (uid=504)
Apr 7 12:13:59 test-server syslogd 1.4.1: restart.
Apr 7 12:13:59 test-server syslog: syslogd startup succeeded
Apr 7 12:13:59 test-server kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 7 12:13:59 test-server kernel: Linux version 2.4.18-14smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002
Apr 7 12:13:59 test-server kernel: BIOS-provided physical RAM map:
Apr 7 12:13:59 test-server kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 0000000000100000 - 000000003fffa000 (usable)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 000000003fffa000 - 0000000040000000 (ACPI data)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Apr 7 12:13:59 test-server kernel: BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Apr 7 12:13:59 test-server kernel: 127MB HIGHMEM available.
Apr 7 12:13:59 test-server syslog: klogd startup succeeded
Apr 7 12:13:59 test-server kernel: 896MB LOWMEM available.
Apr 7 12:13:59 test-server kernel: found SMP MP-table at 000f4fd0
Apr 7 12:13:59 test-server portmap: portmap startup succeeded
Apr 7 12:13:59 test-server kernel: hm, page 000f4000 reserved twice.
Apr 7 12:13:59 test-server kernel: hm, page 000f5000 reserved twice.
Apr 7 12:13:59 test-server kernel: hm, page 000f2000 reserved twice.
Apr 7 12:13:59 test-server rpc.statd[610]: Version 1.0.1 Starting
Apr 7 12:13:59 test-server nfslock: rpc.statd startup succeeded
Apr 7 12:13:59 test-server kernel: hm, page 000f3000 reserved twice.
Apr 7 12:13:59 test-server kernel: On node 0 totalpages: 262138
Apr 7 12:13:59 test-server keytable: Loading keymap:
Apr 7 12:13:59 test-server kernel: zone(0): 4096 pages.
Apr 7 12:13:59 test-server keytable:
Apr 7 12:14:00 test-server kernel: zone(1): 225280 pages.
Apr 7 12:14:00 test-server keytable:
Apr 7 12:14:00 test-server kernel: zone(2): 32762 pages.
Apr 7 12:14:00 test-server rc: Starting keytable: succeeded
Apr 7 12:14:00 test-server kernel: ACPI: Searched entire block, no RSDP was found.
Apr 7 12:14:00 test-server kernel: ACPI: RSDP located at physical address c00f4f70
Apr 7 12:14:00 test-server kernel: RSD PTR v0 [COMPAQ]
Apr 7 12:14:00 test-server random: Initializing random number generator: succeeded
Apr 7 12:14:00 test-server kernel: __va_range(0x3fffa000, 0x68): idx=8 mapped at ffff6000
Apr 7 12:14:00 test-server kernel: ACPI table found: RSDT v1 [COMPAQ P29 0.2]
Apr 7 12:14:00 test-server pcmcia: Starting PCMCIA services:
Apr 7 12:14:00 test-server kernel: __va_range(0x3fffa040, 0x24): idx=8 mapped at ffff6000
Apr 7 12:14:00 test-server pcmcia: modules
Apr 7 12:14:00 test-server kernel: __va_range(0x3fffa040, 0x74): idx=8 mapped at ffff6000
Apr 7 12:14:00 test-server pcmcia: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
Apr 7 12:14:00 test-server kernel: ACPI table found: FACP v1 [COMPAQ P29 0.2]
Apr 7 12:14:00 test-server pcmcia: You may find more information in syslog or the output from dmesg
Apr 7 12:14:00 test-server cardmgr[662]: starting, version is 3.1.31
Apr 7 12:14:00 test-server kernel: __va_range(0x3fffa100, 0x24): idx=8 mapped at ffff6000
Apr 7 12:14:00 test-server pcmcia: /lib/modules/2.4.18-14smp/pcmcia/tcic.o: init_module: No such device
Apr 7 12:14:00 test-server kernel: __va_range(0x3fffa100, 0xac): idx=8 mapped at ffff6000
Apr 7 12:14:00 test-server cardmgr[662]: config error, file 'config' line 1053: syntax error
Apr 7 12:14:00 test-server pcmcia: /lib/modules/2.4.18-14smp/pcmcia/ds.o: init_module: Operation not permitted
Apr 7 12:14:00 test-server kernel: ACPI table found: APIC v1 [COMPAQ 00000083 0.2]
Apr 7 12:14:00 test-server cardmgr[662]: config error, file 'config' line 2129: no function bindings
Apr 7 12:14:00 test-server pcmcia: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
Apr 7 12:14:00 test-server kernel: __va_range(0x3fffa100, 0xac): idx=8 mapped at ffff6000
Apr 7 12:14:00 test-server cardmgr[662]: no pcmcia driver in /proc/devices
Apr 7 12:14:00 test-server pcmcia: You may find more information in syslog or the output from dmesg
Apr 7 12:14:00 test-server kernel: LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
Apr 7 12:14:00 test-server cardmgr[662]: exiting
Apr 7 12:14:00 test-server pcmcia: cardmgr.
Apr 7 12:14:00 test-server kernel: CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 12:14:00 test-server rc: Starting pcmcia: succeeded
Apr 7 12:14:01 test-server kernel:
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0002] id[0x2] enabled[0])
Apr 7 12:14:01 test-server kernel: CPU 1 (0x0200) disabled
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0004] id[0x4] enabled[0])
Apr 7 12:14:01 test-server kernel: CPU 2 (0x0400) disabled
Apr 7 12:14:01 test-server netfs: Mounting other filesystems: succeeded
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0006] id[0x6] enabled[1])
Apr 7 12:14:01 test-server kernel: CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 12:14:01 test-server kernel:
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0001] id[0x1] enabled[1])
Apr 7 12:14:01 test-server autofs: automount startup succeeded
Apr 7 12:14:01 test-server kernel: CPU 4 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 12:14:01 test-server sshd: Starting sshd:
Apr 7 12:14:01 test-server kernel:
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0003] id[0x3] enabled[0])
Apr 7 12:14:01 test-server kernel: CPU 5 (0x0300) disabled
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0005] id[0x5] enabled[0])
Apr 7 12:14:01 test-server kernel: CPU 6 (0x0500) disabled
Apr 7 12:14:01 test-server kernel: LAPIC (acpi_id[0x0007] id[0x7] enabled[1])
Apr 7 12:14:01 test-server kernel: CPU 7 (0x0700) enabledProcessor #7 Pentium 4(tm) XEON(tm) APIC version 16
Apr 7 12:13:40 test-server rc.sysinit: Mounting proc filesystem: succeeded
Apr 7 12:14:01 test-server kernel:
Apr 7 12:13:40 test-server rc.sysinit: Unmounting initrd: succeeded
Apr 7 12:14:02 test-server kernel: IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
Apr 7 12:13:40 test-server sysctl: net.ipv4.ip_forward = 0
Apr 7 12:14:02 test-server kernel: IOAPIC (id[0x3] address[0xfec01000] global_irq_base[0x10])
Apr 7 12:14:02 test-server sshd: succeeded
Apr 7 12:13:40 test-server sysctl: net.ipv4.conf.default.rp_filter = 1
Apr 7 12:14:02 test-server kernel: IOAPIC (id[0x4] address[0xfec02000] global_irq_base[0x20])
Apr 7 12:14:02 test-server sshd: ^[[60G[
Apr 7 12:13:40 test-server sysctl: kernel.sysrq = 0
Apr 7 12:14:02 test-server kernel: IOAPIC (id[0x5] address[0xfec03000] global_irq_base[0x30])
Apr 7 12:14:02 test-server sshd:
Apr 7 12:13:40 test-server sysctl: kernel.core_uses_pid = 1
Apr 7 12:14:02 test-server kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])
Apr 7 12:14:02 test-server rc: Starting sshd: succeeded
Apr 7 12:13:40 test-server rc.sysinit: Configuring kernel parameters: succeeded
Apr 7 12:14:02 test-server kernel: LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1])
Apr 7 12:13:40 test-server date: Mon Apr 7 12:13:35 KST 2003
Apr 7 12:14:02 test-server kernel: 8 CPUs total
Apr 7 12:13:40 test-server rc.sysinit: Setting clock (localtime): Mon Apr 7 12:13:35 KST 2003 succeeded
Apr 7 12:14:02 test-server kernel: Local APIC address fee00000
Apr 7 12:13:40 test-server rc.sysinit: Loading default keymap succeeded
Apr 7 12:14:02 test-server kernel: __va_range(0x3fffa1c0, 0x24): idx=8 mapped at ffff6000
Apr 7 12:13:40 test-server rc.sysinit: Setting default font (lat0-sun16): succeeded
Apr 7 12:14:02 test-server kernel: __va_range(0x3fffa1c0, 0x50): idx=8 mapped at ffff6000
Apr 7 12:13:40 test-server rc.sysinit: Setting hostname test-server: succeeded
Apr 7 12:14:03 test-server kernel: ACPI table found: SPCR v1 [COMPAQ SPCRRBSU 0.1]
Apr 7 12:13:40 test-server rc.sysinit: Initializing USB controller (usb-ohci): succeeded
Apr 7 12:14:03 test-server kernel: Enabling the CPU's according to the ACPI table
Apr 7 12:14:03 test-server kernel: Intel MultiProcessor Specification v1.4
Apr 7 12:13:40 test-server rc.sysinit: Mounting USB filesystem: succeeded
Apr 7 12:14:03 test-server kernel: Virtual Wire compatibility mode.
Apr 7 12:13:40 test-server rc.sysinit: Initializing USB HID interface: succeeded
Apr 7 12:14:03 test-server kernel: OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Apr 7 12:13:40 test-server rc.sysinit: Initializing USB keyboard: succeeded
Apr 7 12:14:03 test-server kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Apr 7 12:13:40 test-server rc.sysinit: Initializing USB mouse: succeeded
Apr 7 12:14:03 test-server kernel: I/O APIC #3 Version 17 at 0xFEC01000.
Apr 7 12:13:40 test-server fsck: /: clean, 223369/1281696 files, 1328206/2560196 blocks
Apr 7 12:14:03 test-server kernel: I/O APIC #4 Version 17 at 0xFEC02000.
Apr 7 12:14:03 test-server kernel: I/O APIC #5 Version 17 at 0xFEC03000.
Apr 7 12:13:40 test-server rc.sysinit: Checking root filesystem succeeded
Apr 7 12:14:03 test-server kernel: Processors: 4
Apr 7 12:13:40 test-server rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Apr 7 12:14:03 test-server kernel: Kernel command line: ro root=LABEL=/
Apr 7 12:13:40 test-server rc.sysinit: Activating swap partitions: succeeded
Apr 7 12:14:03 test-server kernel: Initializing CPU#0
Apr 7 12:13:41 test-server rc.sysinit: Finding module dependencies: succeeded
Apr 7 12:14:03 test-server kernel: Detected 2789.754 MHz processor.
Apr 7 12:13:41 test-server fsck: /data: recovering journal
Apr 7 12:14:03 test-server kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Apr 7 12:13:42 test-server fsck: /data: clean, 2449/2436448 files, 403384/4864380 blocks
Apr 7 12:14:03 test-server kernel: Console: colour VGA+ 80x25
Apr 7 12:13:42 test-server fsck: /home: recovering journal
Apr 7 12:14:04 test-server kernel: Calibrating delay loop... 5539.46 BogoMIPS
Apr 7 12:13:43 test-server fsck: /home: clean, 136598/2436448 files, 1230227/4864380 blocks
Apr 7 12:14:04 test-server kernel: Memory: 1026884k/1048552k available (1451k kernel code, 18084k reserved, 1067k data, 240k init, 131048k highmem)
Apr 7 12:13:44 test-server fsck: /homepage: recovering journal
Apr 7 12:14:04 test-server kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 7 12:13:45 test-server fsck: /homepage: clean, 403/2436448 files, 550994/4864376 blocks
Apr 7 12:14:04 test-server kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Apr 7 12:13:45 test-server rc.sysinit: Checking filesystems succeeded
Apr 7 12:14:04 test-server kernel: Mount cache hash table entries: 16384 (order: 5, 131072 bytes)
Apr 7 12:13:45 test-server rc.sysinit: Mounting local filesystems: succeeded
Apr 7 12:13:45 test-server rc.sysinit: Enabling local filesystem quotas: succeeded
Apr 7 12:13:45 test-server rc.sysinit: Enabling swap space: succeeded
Apr 7 12:14:04 test-server kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 7 12:13:47 test-server init: Entering runlevel: 3
Apr 7 12:14:04 test-server kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Apr 7 12:13:47 test-server microcode_ctl: microcode_ctl startup succeeded
Apr 7 12:13:47 test-server kudzu: Updating /etc/fstab succeeded
Apr 7 12:14:04 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 12:13:54 test-server kudzu: succeeded
Apr 7 12:14:04 test-server kernel: CPU: L2 cache: 512K
Apr 7 12:13:54 test-server rc: Starting ip6tables: succeeded
Apr 7 12:14:04 test-server kernel: CPU: Physical Processor ID: 0
Apr 7 12:13:54 test-server rc: Starting iptables: succeeded
Apr 7 12:13:54 test-server sysctl: net.ipv4.ip_forward = 0
Apr 7 12:14:04 test-server kernel: Intel machine check architecture supported.
Apr 7 12:13:54 test-server sysctl: net.ipv4.conf.default.rp_filter = 1
Apr 7 12:14:04 test-server kernel: Intel machine check reporting enabled on CPU#0.
Apr 7 12:13:54 test-server sysctl: kernel.sysrq = 0
Apr 7 12:13:54 test-server sysctl: kernel.core_uses_pid = 1
Apr 7 12:13:54 test-server network: Setting network parameters: succeeded
Apr 7 12:14:05 test-server kernel: Enabling fast FPU save and restore... done.
Apr 7 12:13:54 test-server network: Bringing up loopback interface: succeeded
Apr 7 12:14:05 test-server kernel: Enabling unmasked SIMD FPU exception support... done.
Apr 7 12:13:57 test-server network: Bringing up interface eth0: succeeded
Apr 7 12:14:05 test-server kernel: Checking 'hlt' instruction... OK.
Apr 7 12:13:59 test-server network: Bringing up interface eth1: succeeded
Apr 7 12:14:05 test-server kernel: POSIX conformance testing by UNIFIX
Apr 7 12:14:05 test-server kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Apr 7 12:14:05 test-server kernel: mtrr: detected mtrr type: Intel
Apr 7 12:14:05 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 12:14:05 test-server kernel: CPU: L2 cache: 512K
Apr 7 12:14:05 test-server kernel: CPU: Physical Processor ID: 0
Apr 7 12:14:05 test-server kernel: Intel machine check reporting enabled on CPU#0.
Apr 7 12:14:05 test-server kernel: CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 12:14:05 test-server kernel: per-CPU timeslice cutoff: 1463.05 usecs.
Apr 7 12:14:05 test-server kernel: task migration cache decay timeout: 1 msecs.
Apr 7 12:14:05 test-server kernel: enabled ExtINT on CPU#0
Apr 7 12:14:05 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 12:14:05 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 12:14:05 test-server kernel: Booting processor 1/1 eip 2000
Apr 7 12:14:05 test-server kernel: Initializing CPU#1
Apr 7 12:14:05 test-server kernel: masked ExtINT on CPU#1
Apr 7 12:14:05 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 12:14:05 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 12:14:05 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 7 12:14:05 test-server xinetd: xinetd startup succeeded
Apr 7 12:14:05 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 12:14:05 test-server kernel: CPU: L2 cache: 512K
Apr 7 12:14:05 test-server kernel: CPU: Physical Processor ID: 0
Apr 7 12:14:05 test-server kernel: Intel machine check reporting enabled on CPU#1.
Apr 7 12:14:05 test-server kernel: CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 12:14:05 test-server kernel: Booting processor 2/6 eip 2000
Apr 7 12:14:06 test-server kernel: Initializing CPU#2
Apr 7 12:14:06 test-server kernel: masked ExtINT on CPU#2
Apr 7 12:14:06 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 12:14:06 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 12:14:06 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 7 12:14:06 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 12:14:06 test-server kernel: CPU: L2 cache: 512K
Apr 7 12:14:06 test-server kernel: CPU: Physical Processor ID: 3
Apr 7 12:14:06 test-server kernel: Intel machine check reporting enabled on CPU#2.
Apr 7 12:14:06 test-server kernel: CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 12:14:06 test-server kernel: Booting processor 3/7 eip 2000
Apr 7 12:14:06 test-server kernel: Initializing CPU#3
Apr 7 12:14:06 test-server kernel: masked ExtINT on CPU#3
Apr 7 12:14:06 test-server kernel: ESR value before enabling vector: 00000000
Apr 7 12:14:06 test-server kernel: ESR value after enabling vector: 00000000
Apr 7 12:14:06 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 7 12:14:06 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 7 12:14:06 test-server kernel: CPU: L2 cache: 512K
Apr 7 12:14:06 test-server kernel: CPU: Physical Processor ID: 3
Apr 7 12:14:06 test-server kernel: Intel machine check reporting enabled on CPU#3.
Apr 7 12:14:06 test-server kernel: CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 7 12:14:06 test-server kernel: Total of 4 processors activated (22259.09 BogoMIPS).
Apr 7 12:14:06 test-server kernel: cpu_sibling_map[0] = 1
Apr 7 12:14:06 test-server kernel: cpu_sibling_map[1] = 0
Apr 7 12:14:06 test-server kernel: cpu_sibling_map[2] = 3
Apr 7 12:14:06 test-server kernel: cpu_sibling_map[3] = 2
Apr 7 12:14:06 test-server kernel: ENABLING IO-APIC IRQs
Apr 7 12:14:06 test-server kernel: Setting 2 in the phys_id_present_map
Apr 7 12:14:06 test-server kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Apr 7 12:14:06 test-server kernel: Setting 3 in the phys_id_present_map
Apr 7 12:14:06 test-server kernel: ...changing IO-APIC physical APIC ID to 3 ... ok.
Apr 7 12:14:06 test-server kernel: Setting 4 in the phys_id_present_map
Apr 7 12:14:06 test-server kernel: ...changing IO-APIC physical APIC ID to 4 ... ok.
Apr 7 12:14:06 test-server kernel: Setting 5 in the phys_id_present_map
Apr 7 12:14:06 test-server kernel: ...changing IO-APIC physical APIC ID to 5 ... ok.
Apr 7 12:14:06 test-server kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Apr 7 12:14:06 test-server kernel: testing the IO APIC.......................
Apr 7 12:14:07 test-server kernel:
Apr 7 12:14:07 test-server last message repeated 3 times
Apr 7 12:14:07 test-server kernel: .................................... done.
Apr 7 12:14:07 test-server kernel: Using local APIC timer interrupts.
Apr 7 12:14:07 test-server kernel: calibrating APIC timer ...
Apr 7 12:14:07 test-server kernel: ..... CPU clock speed is 2788.1676 MHz.
Apr 7 12:14:07 test-server kernel: ..... host bus clock speed is 99.1175 MHz.
Apr 7 12:14:07 test-server kernel: cpu: 0, clocks: 194522, slice: 38904
Apr 7 12:14:07 test-server kernel: CPU0<T0:194512,T1:155600,D:8,S:38904,C:194522>
Apr 7 12:14:07 test-server kernel: cpu: 1, clocks: 194522, slice: 38904
Apr 7 12:14:07 test-server kernel: cpu: 3, clocks: 194522, slice: 38904
Apr 7 12:14:07 test-server kernel: cpu: 2, clocks: 194522, slice: 38904
Apr 7 12:14:07 test-server kernel: CPU1<T0:194512,T1:116704,D:0,S:38904,C:194522>
Apr 7 12:14:07 test-server kernel: CPU2<T0:194512,T1:77792,D:8,S:38904,C:194522>
Apr 7 12:14:07 test-server kernel: CPU3<T0:194512,T1:38896,D:0,S:38904,C:194522>
Apr 7 12:14:07 test-server kernel: checking TSC synchronization across CPUs: passed.
Apr 7 12:14:07 test-server kernel: migration_task 0 on cpu=0
Apr 7 12:14:07 test-server kernel: migration_task 1 on cpu=1
Apr 7 12:14:07 test-server kernel: migration_task 2 on cpu=2
Apr 7 12:14:07 test-server kernel: migration_task 3 on cpu=3
Apr 7 12:14:07 test-server xinetd[745]: xinetd Version 2.3.7 started with libwrap options compiled in.
Apr 7 12:14:07 test-server kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Apr 7 12:14:07 test-server xinetd[745]: Started working: 4 available services
Apr 7 12:14:07 test-server kernel: mtrr: probably your BIOS does not setup all CPUs
Apr 7 12:14:07 test-server kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
Apr 7 12:14:07 test-server kernel: PCI: Using configuration type 1
Apr 7 12:14:07 test-server kernel: PCI: Probing PCI hardware
Apr 7 12:14:07 test-server kernel: PCI: Discovered peer bus 01
Apr 7 12:14:07 test-server kernel: PCI: Discovered peer bus 02
Apr 7 12:14:07 test-server kernel: PCI: Discovered peer bus 06
Apr 7 12:14:07 test-server kernel: PCI: Device 00:00 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:01 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:02 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:78 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:7b not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:80 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:82 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:88 not found by BIOS
Apr 7 12:14:07 test-server kernel: PCI: Device 00:8a not found by BIOS
Apr 7 12:14:07 test-server kernel: isapnp: Scanning for PnP cards...
Apr 7 12:14:08 test-server kernel: isapnp: No Plug & Play device found
Apr 7 12:14:08 test-server kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Apr 7 12:14:08 test-server kernel: Linux NET4.0 for Linux 2.4
Apr 7 12:14:08 test-server kernel: Based upon Swansea University Computer Society NET3.039
Apr 7 12:14:08 test-server kernel: Initializing RT netlink socket
Apr 7 12:14:08 test-server kernel: apm: BIOS not found.
Apr 7 12:14:08 test-server kernel: Starting kswapd
Apr 7 12:14:08 test-server sendmail: sendmail startup succeeded
Apr 7 12:14:08 test-server kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
Apr 7 12:14:08 test-server kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Apr 7 12:14:08 test-server kernel: pty: 2048 Unix98 ptys configured
Apr 7 12:14:08 test-server sendmail: sm-client startup succeeded
Apr 7 12:14:08 test-server kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 7 12:14:08 test-server kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Apr 7 12:14:08 test-server kernel: Real Time Clock Driver v1.10e
Apr 7 12:14:08 test-server kernel: oprofile: can't get RTC I/O Ports
Apr 7 12:14:08 test-server kernel: block: 1024 slots per queue, batch=256
Apr 7 12:14:08 test-server kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Apr 7 12:14:08 test-server kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 7 12:14:08 test-server kernel: SvrWks CSB5: IDE controller on PCI bus 00 dev 79
Apr 7 12:14:08 test-server kernel: SvrWks CSB5: chipset revision 147
Apr 7 12:14:08 test-server kernel: SvrWks CSB5: not 100%% native mode: will probe irqs later
Apr 7 12:14:08 test-server kernel: SvrWks CSB5: simplex device: DMA forced
Apr 7 12:14:08 test-server privoxy: Apr 07 12:14:08 Privoxy(08192) Info: loading configuration file '/etc/privoxy/config':
Apr 7 12:14:08 test-server kernel: ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
Apr 7 12:14:08 test-server kernel: SvrWks CSB5: simplex device: DMA forced
Apr 7 12:14:08 test-server kernel: ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
Apr 7 12:14:08 test-server kernel: hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
Apr 7 12:14:08 test-server kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 7 12:14:08 test-server kernel: ide-floppy driver 0.99.newide
Apr 7 12:14:08 test-server kernel: Floppy drive(s): fd0 is 1.44M
Apr 7 12:14:08 test-server kernel: FDC 0 is a National Semiconductor PC87306
Apr 7 12:14:08 test-server kernel: NET4: Frame Diverter 0.46
Apr 7 12:14:08 test-server kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Apr 7 12:14:08 test-server kernel: ide-floppy driver 0.99.newide
Apr 7 12:14:08 test-server kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Apr 7 12:14:08 test-server kernel: md: Autodetecting RAID arrays.
Apr 7 12:14:08 test-server kernel: md: autorun ...
Apr 7 12:14:09 test-server kernel: md: ... autorun DONE.
Apr 7 12:14:09 test-server kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Apr 7 12:14:09 test-server kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 7 12:14:09 test-server kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Apr 7 12:14:09 test-server kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Apr 7 12:14:09 test-server kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr 7 12:14:09 test-server kernel: Linux IP multicast router 0.06 plus PIM-SM
Apr 7 12:14:09 test-server kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Apr 7 12:14:09 test-server kernel: RAMDISK: Compressed image found at block 0
Apr 7 12:14:09 test-server kernel: Freeing initrd memory: 216k freed
Apr 7 12:14:09 test-server kernel: VFS: Mounted root (ext2 filesystem).
Apr 7 12:14:09 test-server kernel: SCSI subsystem driver Revision: 1.00
Apr 7 12:14:09 test-server kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Apr 7 12:14:09 test-server kernel: Compaq CISS Driver (v 2.4.30)
Apr 7 12:14:09 test-server kernel: cciss: using DAC cycles
Apr 7 12:14:09 test-server kernel: blocks= 142253280 block_size= 512
Apr 7 12:14:09 test-server kernel: heads= 255, sectors= 32, cylinders= 17433
Apr 7 12:14:09 test-server kernel:
Apr 7 12:14:09 test-server kernel: blk: queue c042e400, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Apr 7 12:14:09 test-server kernel: Partition check:
Apr 7 12:14:09 test-server kernel: cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
Apr 7 12:14:09 test-server kernel: Journalled Block Device driver loaded
Apr 7 12:14:09 test-server kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Apr 7 12:14:09 test-server kernel: EXT3-fs: write access will be enabled during recovery.
Apr 7 12:14:09 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 12:14:09 test-server kernel: EXT3-fs: recovery complete.
Apr 7 12:14:09 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 12:14:09 test-server kernel: Freeing unused kernel memory: 240k freed
Apr 7 12:14:09 test-server kernel: usb.c: registered new driver usbdevfs
Apr 7 12:14:09 test-server kernel: usb.c: registered new driver hub
Apr 7 12:14:09 test-server kernel: usb-ohci.c: USB OHCI at membase 0xf887c000, IRQ 7
Apr 7 12:14:09 test-server kernel: usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
Apr 7 12:14:09 test-server kernel: usb.c: new USB bus registered, assigned bus number 1
Apr 7 12:14:09 test-server kernel: hub.c: USB hub found
Apr 7 12:14:09 test-server kernel: hub.c: 4 ports detected
Apr 7 12:14:09 test-server privoxy: privoxy startup succeeded
Apr 7 12:14:09 test-server kernel: usb.c: registered new driver hiddev
Apr 7 12:14:09 test-server kernel: usb.c: registered new driver hid
Apr 7 12:14:09 test-server kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Apr 7 12:14:09 test-server gpm: gpm startup succeeded
Apr 7 12:14:09 test-server kernel: hid-core.c: USB HID support drivers
Apr 7 12:14:09 test-server kernel: mice: PS/2 mouse device common for all mice
Apr 7 12:14:09 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,1), internal journal
Apr 7 12:14:09 test-server kernel: Adding Swap: 2513256k swap-space (priority -1)
Apr 7 12:14:09 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 12:14:09 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,2), internal journal
Apr 7 12:14:09 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 12:14:09 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 12:14:09 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,3), internal journal
Apr 7 12:14:10 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 12:14:10 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 7 12:14:10 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,5), internal journal
Apr 7 12:14:10 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 7 12:14:10 test-server kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Apr 7 12:14:10 test-server kernel: microcode: CPU0 no microcode found! (sig=f27, pflags=2)
Apr 7 12:14:10 test-server kernel: microcode: CPU2 no microcode found! (sig=f27, pflags=2)
Apr 7 12:14:10 test-server kernel: microcode: CPU3 no microcode found! (sig=f27, pflags=2)
Apr 7 12:14:10 test-server kernel: microcode: CPU1 no microcode found! (sig=f27, pflags=2)
Apr 7 12:14:10 test-server kernel: ohci1394: pci_module_init failed
Apr 7 12:14:10 test-server kernel: ip_tables: (C) 2000-2002 Netfilter core team
Apr 7 12:14:10 test-server kernel: tg3.c:v1.0 (Jul 19, 2002)
Apr 7 12:14:10 test-server kernel: eth0: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b9
Apr 7 12:14:10 test-server kernel: eth1: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b8
Apr 7 12:14:10 test-server kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Apr 7 12:14:10 test-server canna: cannaserver startup succeeded
Apr 7 12:14:10 test-server kernel: tg3: eth0: Flow control is off for TX and off for RX.
Apr 7 12:14:10 test-server kernel: Linux Kernel Card Services 3.1.22
Apr 7 12:14:10 test-server kernel: options: [pci] [cardbus] [pm]
Apr 7 12:14:10 test-server kernel: Databook TCIC-2 PCMCIA probe: not found.
Apr 7 12:14:10 test-server kernel: ds: no socket drivers loaded!
Apr 7 12:14:10 test-server crond: crond startup succeeded
Apr 7 12:14:11 test-server xfs: xfs startup succeeded
Apr 7 12:14:11 test-server xfs: listening on port 7100
Apr 7 12:14:11 test-server anacron: anacron startup succeeded
Apr 7 12:14:11 test-server atd: atd startup succeeded
Apr 7 12:14:11 test-server wine: Registering binary handler for Windows applications
Apr 7 12:14:12 test-server rc: Starting wine: succeeded
Apr 7 12:14:12 test-server rc: Starting mdmonitor: succeeded
Apr 7 12:14:48 test-server sshd(pam_unix)[944]: session opened for user test-server by (uid=501)
Apr 7 12:14:55 test-server sshd(pam_unix)[986]: session opened for user test-server by (uid=501)
Apr 7 12:14:55 test-server su(pam_unix)[985]: session opened for user root by test-server(uid=501)
Apr 7 12:15:16 test-server su(pam_unix)[1072]: session opened for user postgres by test-server(uid=0)
Apr 7 12:15:28 test-server su(pam_unix)[1072]: session closed for user postgres
Apr 7 12:42:49 test-server login(pam_unix)[1552]: session opened for user test-server by (uid=0)
Apr 7 12:42:49 test-server -- test-server[1552]: LOGIN ON pts/2 BY test-server FROM 61.74.194.138
Apr 7 12:48:08 test-server login(pam_unix)[1620]: session opened for user test-server by (uid=0)
Apr 7 12:48:08 test-server -- test-server[1620]: LOGIN ON pts/3 BY test-server FROM 211.33.131.155
Apr
message log파일입니다.
Apr 11 09:06:24 test-server syslogd 1.4.1: restart.
Apr 11 09:06:24 test-server syslog: syslogd startup succeeded
Apr 11 09:06:24 test-server kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 11 09:06:24 test-server syslog: klogd startup succeeded
Apr 11 09:06:24 test-server kernel: Linux version 2.4.18-14smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Wed Sep 4 12:34:47 EDT 2002
Apr 11 09:06:24 test-server kernel: BIOS-provided physical RAM map:
Apr 11 09:06:24 test-server kernel: BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 0000000000100000 - 000000003fffa000 (usable)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 000000003fffa000 - 0000000040000000 (ACPI data)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
Apr 11 09:06:24 test-server kernel: BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Apr 11 09:06:25 test-server kernel: 127MB HIGHMEM available.
Apr 11 09:06:25 test-server portmap: portmap startup succeeded
Apr 11 09:06:25 test-server kernel: 896MB LOWMEM available.
Apr 11 09:06:25 test-server kernel: found SMP MP-table at 000f4fd0
Apr 11 09:06:25 test-server kernel: hm, page 000f4000 reserved twice.
Apr 11 09:06:25 test-server rpc.statd[608]: Version 1.0.1 Starting
Apr 11 09:06:25 test-server nfslock: rpc.statd startup succeeded
Apr 11 09:06:25 test-server kernel: hm, page 000f5000 reserved twice.
Apr 11 09:06:25 test-server keytable: Loading keymap:
Apr 11 09:06:25 test-server kernel: hm, page 000f2000 reserved twice.
Apr 11 09:06:25 test-server keytable:
Apr 11 09:06:25 test-server kernel: hm, page 000f3000 reserved twice.
Apr 11 09:06:25 test-server keytable:
Apr 11 09:06:25 test-server kernel: On node 0 totalpages: 262138
Apr 11 09:06:25 test-server rc: Starting keytable: succeeded
Apr 11 09:06:25 test-server kernel: zone(0): 4096 pages.
Apr 11 09:06:25 test-server kernel: zone(1): 225280 pages.
Apr 11 09:06:25 test-server kernel: zone(2): 32762 pages.
Apr 11 09:06:25 test-server random: Initializing random number generator: succeeded
Apr 11 09:06:25 test-server kernel: ACPI: Searched entire block, no RSDP was found.
Apr 11 09:06:25 test-server kernel: ACPI: RSDP located at physical address c00f4f70
Apr 11 09:06:25 test-server kernel: RSD PTR v0 [COMPAQ]
Apr 11 09:06:25 test-server kernel: __va_range(0x3fffa000, 0x68): idx=8 mapped at ffff6000
Apr 11 09:06:25 test-server kernel: ACPI table found: RSDT v1 [COMPAQ P29 0.2]
Apr 11 09:06:25 test-server kernel: __va_range(0x3fffa040, 0x24): idx=8 mapped at ffff6000
Apr 11 09:06:25 test-server kernel: __va_range(0x3fffa040, 0x74): idx=8 mapped at ffff6000
Apr 11 09:06:25 test-server netfs: Mounting other filesystems: succeeded
Apr 11 09:06:25 test-server kernel: ACPI table found: FACP v1 [COMPAQ P29 0.2]
Apr 11 09:06:26 test-server kernel: __va_range(0x3fffa100, 0x24): idx=8 mapped at ffff6000
Apr 11 09:06:26 test-server kernel: __va_range(0x3fffa100, 0xac): idx=8 mapped at ffff6000
Apr 11 09:06:26 test-server kernel: ACPI table found: APIC v1 [COMPAQ 00000083 0.2]
Apr 11 09:06:26 test-server autofs: automount startup succeeded
Apr 11 09:06:26 test-server kernel: __va_range(0x3fffa100, 0xac): idx=8 mapped at ffff6000
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
Apr 11 09:06:26 test-server sshd: Starting sshd:
Apr 11 09:06:26 test-server kernel: CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16
Apr 11 09:06:26 test-server kernel:
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0002] id[0x2] enabled[0])
Apr 11 09:06:26 test-server kernel: CPU 1 (0x0200) disabled
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0004] id[0x4] enabled[0])
Apr 11 09:06:26 test-server kernel: CPU 2 (0x0400) disabled
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0006] id[0x6] enabled[1])
Apr 11 09:06:26 test-server kernel: CPU 3 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16
Apr 11 09:06:26 test-server kernel:
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0001] id[0x1] enabled[0])
Apr 11 09:06:26 test-server kernel: CPU 4 (0x0100) disabled
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0003] id[0x3] enabled[0])
Apr 11 09:06:26 test-server sshd: succeeded
Apr 11 09:06:26 test-server kernel: CPU 5 (0x0300) disabled
Apr 11 09:06:26 test-server sshd: ^[[60G[
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0005] id[0x5] enabled[0])
Apr 11 09:06:26 test-server sshd:
Apr 11 09:06:26 test-server kernel: CPU 6 (0x0500) disabled
Apr 11 09:06:26 test-server rc: Starting sshd: succeeded
Apr 11 09:06:26 test-server kernel: LAPIC (acpi_id[0x0007] id[0x7] enabled[0])
Apr 11 09:06:26 test-server kernel: CPU 7 (0x0700) disabled
Apr 11 09:06:26 test-server kernel: IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])
Apr 11 09:06:26 test-server kernel: IOAPIC (id[0x3] address[0xfec01000] global_irq_base[0x10])
Apr 11 09:06:26 test-server kernel: IOAPIC (id[0x4] address[0xfec02000] global_irq_base[0x20])
Apr 11 09:06:27 test-server kernel: IOAPIC (id[0x5] address[0xfec03000] global_irq_base[0x30])
Apr 11 09:06:27 test-server kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])
Apr 11 09:06:27 test-server kernel: LAPIC_NMI (acpi_id[0x00ff] polarity[0x0] trigger[0x0] lint[0x1])
Apr 11 09:06:27 test-server kernel: 8 CPUs total
Apr 11 09:06:27 test-server kernel: Local APIC address fee00000
Apr 11 09:06:27 test-server kernel: __va_range(0x3fffa1c0, 0x24): idx=8 mapped at ffff6000
Apr 11 09:06:27 test-server kernel: __va_range(0x3fffa1c0, 0x50): idx=8 mapped at ffff6000
Apr 11 09:06:06 test-server rc.sysinit: Mounting proc filesystem: succeeded
Apr 11 09:06:27 test-server kernel: ACPI table found: SPCR v1 [COMPAQ SPCRRBSU 0.1]
Apr 11 09:06:06 test-server rc.sysinit: Unmounting initrd: succeeded
Apr 11 09:06:27 test-server kernel: Enabling the CPU's according to the ACPI table
Apr 11 09:06:06 test-server sysctl: net.ipv4.ip_forward = 0
Apr 11 09:06:27 test-server kernel: Intel MultiProcessor Specification v1.4
Apr 11 09:06:27 test-server kernel: Virtual Wire compatibility mode.
Apr 11 09:06:27 test-server kernel: OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Apr 11 09:06:06 test-server sysctl: net.ipv4.conf.default.rp_filter = 1
Apr 11 09:06:27 test-server kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Apr 11 09:06:06 test-server sysctl: kernel.sysrq = 0
Apr 11 09:06:27 test-server kernel: I/O APIC #3 Version 17 at 0xFEC01000.
Apr 11 09:06:06 test-server sysctl: kernel.core_uses_pid = 1
Apr 11 09:06:27 test-server kernel: I/O APIC #4 Version 17 at 0xFEC02000.
Apr 11 09:06:06 test-server rc.sysinit: Configuring kernel parameters: succeeded
Apr 11 09:06:27 test-server kernel: I/O APIC #5 Version 17 at 0xFEC03000.
Apr 11 09:06:06 test-server date: Fri Apr 11 09:06:00 KST 2003
Apr 11 09:06:27 test-server kernel: Processors: 2
Apr 11 09:06:06 test-server rc.sysinit: Setting clock (localtime): Fri Apr 11 09:06:00 KST 2003 succeeded
Apr 11 09:06:27 test-server kernel: Kernel command line: ro root=LABEL=/
Apr 11 09:06:06 test-server rc.sysinit: Loading default keymap succeeded
Apr 11 09:06:27 test-server kernel: Initializing CPU#0
Apr 11 09:06:06 test-server rc.sysinit: Setting default font (lat0-sun16): succeeded
Apr 11 09:06:27 test-server kernel: Detected 2789.024 MHz processor.
Apr 11 09:06:06 test-server rc.sysinit: Setting hostname test-server: succeeded
Apr 11 09:06:27 test-server kernel: Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized
Apr 11 09:06:06 test-server rc.sysinit: Initializing USB controller (usb-ohci): succeeded
Apr 11 09:06:28 test-server kernel: Console: colour VGA+ 80x25
Apr 11 09:06:06 test-server rc.sysinit: Mounting USB filesystem: succeeded
Apr 11 09:06:28 test-server kernel: Calibrating delay loop... 5539.46 BogoMIPS
Apr 11 09:06:06 test-server rc.sysinit: Initializing USB HID interface: succeeded
Apr 11 09:06:28 test-server kernel: Memory: 1026884k/1048552k available (1451k kernel code, 18084k reserved, 1067k data, 240k init, 131048k highmem)
Apr 11 09:06:06 test-server rc.sysinit: Initializing USB keyboard: succeeded
Apr 11 09:06:28 test-server kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Apr 11 09:06:06 test-server rc.sysinit: Initializing USB mouse: succeeded
Apr 11 09:06:28 test-server kernel: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Apr 11 09:06:06 test-server fsck: /: clean, 223397/1281696 files, 1318588/2560196 blocks
Apr 11 09:06:28 test-server kernel: Mount cache hash table entries: 16384 (order: 5, 131072 bytes)
Apr 11 09:06:06 test-server rc.sysinit: Checking root filesystem succeeded
Apr 11 09:06:06 test-server rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Apr 11 09:06:06 test-server rc.sysinit: Activating swap partitions: succeeded
Apr 11 09:06:28 test-server kernel: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Apr 11 09:06:07 test-server rc.sysinit: Finding module dependencies: succeeded
Apr 11 09:06:28 test-server kernel: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Apr 11 09:06:07 test-server fsck: /data: recovering journal
Apr 11 09:06:28 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 11 09:06:28 test-server kernel: CPU: L2 cache: 512K
Apr 11 09:06:28 test-server kernel: CPU: Physical Processor ID: 0
Apr 11 09:06:08 test-server fsck: /data: clean, 2450/2436448 files, 408076/4864380 blocks
Apr 11 09:06:28 test-server kernel: Intel machine check architecture supported.
Apr 11 09:06:08 test-server fsck: /home: recovering journal
Apr 11 09:06:28 test-server kernel: Intel machine check reporting enabled on CPU#0.
Apr 11 09:06:28 test-server kernel: Enabling fast FPU save and restore... done.
Apr 11 09:06:28 test-server kernel: Enabling unmasked SIMD FPU exception support... done.
Apr 11 09:06:28 test-server kernel: Checking 'hlt' instruction... OK.
Apr 11 09:06:28 test-server kernel: POSIX conformance testing by UNIFIX
Apr 11 09:06:09 test-server fsck: /home: clean, 136684/2436448 files, 1230817/4864380 blocks
Apr 11 09:06:29 test-server kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Apr 11 09:06:09 test-server fsck: /homepage: recovering journal
Apr 11 09:06:11 test-server fsck: /homepage: clean, 808/2436448 files, 552430/4864376 blocks
Apr 11 09:06:11 test-server rc.sysinit: Checking filesystems succeeded
Apr 11 09:06:11 test-server rc.sysinit: Mounting local filesystems: succeeded
Apr 11 09:06:11 test-server rc.sysinit: Enabling local filesystem quotas: succeeded
Apr 11 09:06:29 test-server kernel: mtrr: detected mtrr type: Intel
Apr 11 09:06:29 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 11 09:06:29 test-server kernel: CPU: L2 cache: 512K
Apr 11 09:06:11 test-server rc.sysinit: Enabling swap space: succeeded
Apr 11 09:06:29 test-server kernel: CPU: Physical Processor ID: 0
Apr 11 09:06:13 test-server init: Entering runlevel: 3
Apr 11 09:06:13 test-server microcode_ctl: microcode_ctl startup succeeded
Apr 11 09:06:29 test-server kernel: Intel machine check reporting enabled on CPU#0.
Apr 11 09:06:13 test-server kudzu: Updating /etc/fstab succeeded
Apr 11 09:06:19 test-server kudzu: succeeded
Apr 11 09:06:19 test-server rc: Starting ip6tables: succeeded
Apr 11 09:06:29 test-server kernel: CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 11 09:06:19 test-server rc: Starting iptables: succeeded
Apr 11 09:06:29 test-server kernel: per-CPU timeslice cutoff: 1462.51 usecs.
Apr 11 09:06:20 test-server sysctl: net.ipv4.ip_forward = 0
Apr 11 09:06:29 test-server kernel: task migration cache decay timeout: 1 msecs.
Apr 11 09:06:20 test-server sysctl: net.ipv4.conf.default.rp_filter = 1
Apr 11 09:06:20 test-server sysctl: kernel.sysrq = 0
Apr 11 09:06:20 test-server sysctl: kernel.core_uses_pid = 1
Apr 11 09:06:20 test-server network: Setting network parameters: succeeded
Apr 11 09:06:20 test-server network: Bringing up loopback interface: succeeded
Apr 11 09:06:29 test-server kernel: enabled ExtINT on CPU#0
Apr 11 09:06:29 test-server kernel: ESR value before enabling vector: 00000000
Apr 11 09:06:22 test-server network: Bringing up interface eth0: succeeded
Apr 11 09:06:29 test-server kernel: ESR value after enabling vector: 00000000
Apr 11 09:06:24 test-server network: Bringing up interface eth1: succeeded
Apr 11 09:06:29 test-server kernel: Booting processor 1/6 eip 2000
Apr 11 09:06:29 test-server kernel: Initializing CPU#1
Apr 11 09:06:29 test-server kernel: masked ExtINT on CPU#1
Apr 11 09:06:30 test-server kernel: ESR value before enabling vector: 00000000
Apr 11 09:06:30 test-server kernel: ESR value after enabling vector: 00000000
Apr 11 09:06:30 test-server kernel: Calibrating delay loop... 5573.87 BogoMIPS
Apr 11 09:06:30 test-server xinetd: xinetd startup succeeded
Apr 11 09:06:30 test-server kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Apr 11 09:06:30 test-server kernel: CPU: L2 cache: 512K
Apr 11 09:06:30 test-server kernel: CPU: Physical Processor ID: 3
Apr 11 09:06:30 test-server kernel: Intel machine check reporting enabled on CPU#1.
Apr 11 09:06:30 test-server kernel: CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Apr 11 09:06:30 test-server kernel: Total of 2 processors activated (11112.34 BogoMIPS).
Apr 11 09:06:30 test-server kernel: WARNING: No sibling found for CPU 0.
Apr 11 09:06:30 test-server kernel: WARNING: No sibling found for CPU 1.
Apr 11 09:06:30 test-server kernel: ENABLING IO-APIC IRQs
Apr 11 09:06:30 test-server kernel: Setting 2 in the phys_id_present_map
Apr 11 09:06:30 test-server kernel: ...changing IO-APIC physical APIC ID to 2 ... ok.
Apr 11 09:06:30 test-server kernel: Setting 3 in the phys_id_present_map
Apr 11 09:06:30 test-server kernel: ...changing IO-APIC physical APIC ID to 3 ... ok.
Apr 11 09:06:30 test-server kernel: Setting 4 in the phys_id_present_map
Apr 11 09:06:30 test-server kernel: ...changing IO-APIC physical APIC ID to 4 ... ok.
Apr 11 09:06:30 test-server kernel: Setting 5 in the phys_id_present_map
Apr 11 09:06:30 test-server kernel: ...changing IO-APIC physical APIC ID to 5 ... ok.
Apr 11 09:06:30 test-server kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Apr 11 09:06:30 test-server kernel: testing the IO APIC.......................
Apr 11 09:06:31 test-server kernel:
Apr 11 09:06:31 test-server last message repeated 3 times
Apr 11 09:06:31 test-server kernel: .................................... done.
Apr 11 09:06:31 test-server kernel: Using local APIC timer interrupts.
Apr 11 09:06:31 test-server kernel: calibrating APIC timer ...
Apr 11 09:06:31 test-server kernel: ..... CPU clock speed is 2788.1395 MHz.
Apr 11 09:06:31 test-server kernel: ..... host bus clock speed is 99.1165 MHz.
Apr 11 09:06:31 test-server kernel: cpu: 0, clocks: 194512, slice: 64837
Apr 11 09:06:31 test-server kernel: CPU0<T0:194512,T1:129664,D:11,S:64837,C:194512>
Apr 11 09:06:31 test-server kernel: cpu: 1, clocks: 194512, slice: 64837
Apr 11 09:06:31 test-server kernel: CPU1<T0:194512,T1:64832,D:6,S:64837,C:194512>
Apr 11 09:06:31 test-server kernel: checking TSC synchronization across CPUs: passed.
Apr 11 09:06:31 test-server kernel: migration_task 0 on cpu=0
Apr 11 09:06:31 test-server kernel: migration_task 1 on cpu=1
Apr 11 09:06:31 test-server kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Apr 11 09:06:31 test-server kernel: mtrr: probably your BIOS does not setup all CPUs
Apr 11 09:06:31 test-server kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
Apr 11 09:06:31 test-server kernel: PCI: Using configuration type 1
Apr 11 09:06:31 test-server sendmail: sendmail startup succeeded
Apr 11 09:06:31 test-server kernel: PCI: Probing PCI hardware
Apr 11 09:06:31 test-server kernel: PCI: Discovered peer bus 01
Apr 11 09:06:31 test-server kernel: PCI: Discovered peer bus 02
Apr 11 09:06:31 test-server sendmail: sm-client startup succeeded
Apr 11 09:06:31 test-server kernel: PCI: Discovered peer bus 06
Apr 11 09:06:31 test-server kernel: PCI: Device 00:00 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:01 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:02 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:78 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:7b not found by BIOS
Apr 11 09:06:31 test-server privoxy: Apr 11 09:06:31 Privoxy(08192) Info: loading configuration file '/etc/privoxy/config':
Apr 11 09:06:31 test-server kernel: PCI: Device 00:80 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:82 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:88 not found by BIOS
Apr 11 09:06:31 test-server kernel: PCI: Device 00:8a not found by BIOS
Apr 11 09:06:31 test-server kernel: isapnp: Scanning for PnP cards...
Apr 11 09:06:31 test-server kernel: isapnp: No Plug & Play device found
Apr 11 09:06:31 test-server kernel: speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
Apr 11 09:06:31 test-server kernel: Linux NET4.0 for Linux 2.4
Apr 11 09:06:31 test-server kernel: Based upon Swansea University Computer Society NET3.039
Apr 11 09:06:31 test-server kernel: Initializing RT netlink socket
Apr 11 09:06:31 test-server kernel: apm: BIOS not found.
Apr 11 09:06:31 test-server kernel: Starting kswapd
Apr 11 09:06:31 test-server kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces
Apr 11 09:06:31 test-server kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Apr 11 09:06:31 test-server kernel: pty: 2048 Unix98 ptys configured
Apr 11 09:06:31 test-server kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Apr 11 09:06:31 test-server kernel: ttyS0 at 0x03f8 (irq = 4) is a 16550A
Apr 11 09:06:31 test-server kernel: Real Time Clock Driver v1.10e
Apr 11 09:06:32 test-server kernel: oprofile: can't get RTC I/O Ports
Apr 11 09:06:32 test-server xinetd[709]: xinetd Version 2.3.7 started with libwrap options compiled in.
Apr 11 09:06:32 test-server kernel: block: 1024 slots per queue, batch=256
Apr 11 09:06:32 test-server xinetd[709]: Started working: 4 available services
Apr 11 09:06:32 test-server kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Apr 11 09:06:32 test-server kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 11 09:06:32 test-server kernel: SvrWks CSB5: IDE controller on PCI bus 00 dev 79
Apr 11 09:06:32 test-server kernel: SvrWks CSB5: chipset revision 147
Apr 11 09:06:32 test-server kernel: SvrWks CSB5: not 100%% native mode: will probe irqs later
Apr 11 09:06:32 test-server kernel: SvrWks CSB5: simplex device: DMA forced
Apr 11 09:06:32 test-server kernel: ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
Apr 11 09:06:32 test-server kernel: SvrWks CSB5: simplex device: DMA forced
Apr 11 09:06:32 test-server kernel: ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
Apr 11 09:06:32 test-server kernel: hda: COMPAQ CD-ROM SN-124, ATAPI CD/DVD-ROM drive
Apr 11 09:06:32 test-server kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Apr 11 09:06:32 test-server kernel: ide-floppy driver 0.99.newide
Apr 11 09:06:32 test-server kernel: Floppy drive(s): fd0 is 1.44M
Apr 11 09:06:32 test-server kernel: FDC 0 is a National Semiconductor PC87306
Apr 11 09:06:32 test-server kernel: NET4: Frame Diverter 0.46
Apr 11 09:06:32 test-server kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Apr 11 09:06:32 test-server kernel: ide-floppy driver 0.99.newide
Apr 11 09:06:32 test-server kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Apr 11 09:06:32 test-server kernel: md: Autodetecting RAID arrays.
Apr 11 09:06:32 test-server kernel: md: autorun ...
Apr 11 09:06:32 test-server kernel: md: ... autorun DONE.
Apr 11 09:06:32 test-server kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.4
Apr 11 09:06:32 test-server kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Apr 11 09:06:32 test-server kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Apr 11 09:06:32 test-server kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Apr 11 09:06:32 test-server kernel: TCP: Hash tables configured (established 262144 bind 65536)
Apr 11 09:06:32 test-server privoxy: privoxy startup succeeded
Apr 11 09:06:32 test-server kernel: Linux IP multicast router 0.06 plus PIM-SM
Apr 11 09:06:32 test-server kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Apr 11 09:06:32 test-server kernel: RAMDISK: Compressed image found at block 0
Apr 11 09:06:32 test-server gpm: gpm startup succeeded
Apr 11 09:06:32 test-server kernel: Freeing initrd memory: 216k freed
Apr 11 09:06:32 test-server kernel: VFS: Mounted root (ext2 filesystem).
Apr 11 09:06:32 test-server kernel: SCSI subsystem driver Revision: 1.00
Apr 11 09:06:32 test-server kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Apr 11 09:06:32 test-server kernel: Compaq CISS Driver (v 2.4.30)
Apr 11 09:06:32 test-server kernel: cciss: using DAC cycles
Apr 11 09:06:32 test-server kernel: blocks= 142253280 block_size= 512
Apr 11 09:06:32 test-server kernel: heads= 255, sectors= 32, cylinders= 17433
Apr 11 09:06:32 test-server kernel:
Apr 11 09:06:32 test-server kernel: blk: queue c042e400, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Apr 11 09:06:32 test-server kernel: Partition check:
Apr 11 09:06:33 test-server kernel: cciss/c0d0: p1 p2 p3 p4 < p5 p6 >
Apr 11 09:06:33 test-server kernel: Journalled Block Device driver loaded
Apr 11 09:06:33 test-server kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Apr 11 09:06:33 test-server kernel: EXT3-fs: write access will be enabled during recovery.
Apr 11 09:06:33 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 11 09:06:33 test-server kernel: EXT3-fs: recovery complete.
Apr 11 09:06:33 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 09:06:33 test-server kernel: Freeing unused kernel memory: 240k freed
Apr 11 09:06:33 test-server kernel: usb.c: registered new driver usbdevfs
Apr 11 09:06:33 test-server kernel: usb.c: registered new driver hub
Apr 11 09:06:33 test-server kernel: usb-ohci.c: USB OHCI at membase 0xf887c000, IRQ 7
Apr 11 09:06:33 test-server kernel: usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
Apr 11 09:06:33 test-server kernel: usb.c: new USB bus registered, assigned bus number 1
Apr 11 09:06:33 test-server canna: cannaserver startup succeeded
Apr 11 09:06:33 test-server kernel: hub.c: USB hub found
Apr 11 09:06:33 test-server kernel: hub.c: 4 ports detected
Apr 11 09:06:33 test-server kernel: usb.c: registered new driver hiddev
Apr 11 09:06:33 test-server kernel: usb.c: registered new driver hid
Apr 11 09:06:33 test-server kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Apr 11 09:06:33 test-server kernel: hid-core.c: USB HID support drivers
Apr 11 09:06:33 test-server kernel: mice: PS/2 mouse device common for all mice
Apr 11 09:06:33 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,1), internal journal
Apr 11 09:06:33 test-server kernel: Adding Swap: 2513256k swap-space (priority -1)
Apr 11 09:06:33 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 11 09:06:33 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,2), internal journal
Apr 11 09:06:33 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 09:06:33 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 11 09:06:33 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,3), internal journal
Apr 11 09:06:33 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 09:06:33 test-server kernel: kjournald starting. Commit interval 5 seconds
Apr 11 09:06:33 test-server kernel: EXT3 FS 2.4-0.9.18, 14 May 2002 on cciss0(104,5), internal journal
Apr 11 09:06:33 test-server kernel: EXT3-fs: mounted filesystem with ordered data mode.
Apr 11 09:06:33 test-server kernel: IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
Apr 11 09:06:33 test-server kernel: microcode: CPU1 no microcode found! (sig=f27, pflags=2)
Apr 11 09:06:33 test-server kernel: microcode: CPU0 no microcode found! (sig=f27, pflags=2)
Apr 11 09:06:33 test-server kernel: ohci1394: pci_module_init failed
Apr 11 09:06:33 test-server kernel: ip_tables: (C) 2000-2002 Netfilter core team
Apr 11 09:06:33 test-server kernel: tg3.c:v1.0 (Jul 19, 2002)
Apr 11 09:06:33 test-server crond: crond startup succeeded
Apr 11 09:06:33 test-server kernel: eth0: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b9
Apr 11 09:06:33 test-server kernel: eth1: Tigon3 [partno(TBD) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:08:02:e6:90:b8
Apr 11 09:06:33 test-server kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
Apr 11 09:06:33 test-server kernel: tg3: eth0: Flow control is off for TX and off for RX.
Apr 11 09:06:34 test-server xfs: listening on port 7100
Apr 11 09:06:34 test-server xfs: xfs startup succeeded
Apr 11 09:06:34 test-server anacron: anacron startup succeeded
Apr 11 09:06:34 test-server atd: atd startup succeeded
Apr 11 09:06:34 test-server wine: Registering binary handler for Windows applications
Apr 11 09:06:35 test-server rc: Starting wine: succeeded
Apr 11 09:06:35 test-server rc: Starting mdmonitor: succeeded
Apr 11 09:07:03 test-server login(pam_unix)[900]: session opened for user test-server by (uid=0)
Apr 11 09:07:03 test-server -- test-server[900]: LOGIN ON pts/0 BY test-server FROM 61.74.194.138
Apr 11 09:07:07 test-server su(pam_unix)[943]: session opened for user root by test-server(uid=501)
Apr 11 09:07:16 test-server sshd(pam_unix)[976]: session opened for user root by (uid=0)
Apr 11 09:07:26 test-server su(pam_unix)[1050]: session opened for user postgres by root(uid=0)
Apr 11 09:07:50 test-server su(pam_unix)[1050]: session closed for user postgres
Apr 11 09:08:01 test-server su(pam_unix)[1113]: session opened for user postgres by root(uid=0)
Apr 11 09:08:47 test-server su(pam_unix)[943]: session closed for user root
Apr 11 09:08:52 test-server su(pam_unix)[1153]: authentication failure; logname=test-server uid=501 euid=0 tty= ruser=test-server rhost= user=root
Apr 11 09:08:58 test-server su(pam_unix)[1155]: session opened for user root by test-server(uid=501)
Apr 11 09:09:09 test-server su(pam_unix)[1113]: session closed for user postgres
Apr 11 09:09:43 test-server su(pam_unix)[1155]: session closed for user root
Apr 11 09:09:44 test-server login(pam_unix)[900]: session closed for user test-server
Apr 11 09:19:46 test-server login(pam_unix)[1488]: session opened for user test-server by (uid=0)
Apr 11 09:19:46 test-server -- test-server[1488]: LOGIN ON pts/0 BY test-server FROM 61.74.194.138
Apr 11 09:36:24 test-server login(pam_unix)[1701]: session opened for user dhkim by (uid=0)
Apr 11 09:36:24 test-server -- dhkim[1701]: LOGIN ON pts/2 BY dhkim FROM 61.74.194.137
Apr 11 10:00:00 test-server login(pam_unix)[1861]: session opened for user test-server by (uid=0)
Apr 11 10:00:00 test-server -- test-server[1861]: LOGIN ON pts/3 BY test-server FROM 61.74.194.138
Apr 11 10:02:32 test-server ftpd[1931]: wu-ftpd - TLS settings: control allow, client_cert allow, data allow
Apr 11 10:02:35 test-server ftp(pam_unix)[1931]: session opened for user dhkim by (uid=0)
Apr 11 10:05:15 test-server login(pam_unix)[1967]: session opened for user dhkim by (uid=0)
Apr 11 10:05:15 test-server -- dhkim[1967]: LOGIN ON pts/4 BY dhkim FROM 61.74.194.137
Apr 11 10:13:05 test-server su(pam_unix)[2336]: session opened for user news by (uid=0)
Apr 11 10:13:05 test-server su(pam_unix)[2336]: session closed for user news
Apr 11 10:13:34 test-server login(pam_unix)[1861]: session closed for user test-server
Apr 11 10:13:45 test-server login(pam_unix)[2388]: session opened for user test-server by (uid=0)
Apr 11 10:13:45 test-server -- test-server[2388]: LOGIN ON pts/3 BY test-server FROM 211.33.131.155
Apr 11 10:29:42 test-server login(pam_unix)[1701]: session closed for user dhkim
Apr 11 10:30:50 test-server login(pam_unix)[1967]: session closed for user dhkim
Apr 11 10:31:07 test-server login(pam_unix)[2756]: session opened for user dhkim by (uid=0)
Apr 11 10:31:07 test-server -- dhkim[2756]: LOGIN ON pts/2 BY dhkim FROM 61.74.194.137
Apr 11 10:33:51 test-server login(pam_unix)[2828]: session opened for user dhkim by (uid=0)
Apr 11 10:33:51 test-server -- dhkim[2828]: LOGIN ON pts/5 BY dhkim FROM 61.74.194.137
Apr 11 10:34:37 test-server login(pam_unix)[2756]: session closed for user dhkim
Apr 11 10:34:41 test-server login(pam_unix)[2828]: session closed for user dhkim
Apr 11 10:34:56 test-server login(pam_unix)[2892]: session opened for user dhkim by (uid=0)
Apr 11 10:34:56 test-server -- dhkim[2892]: LOGIN ON pts/2 BY dhkim FROM 61.74.194.137
Apr 11 10:35:13 test-server login(pam_unix)[2892]: session closed for user dhkim
Apr 11 10:38:54 test-server su(pam_unix)[2999]: session opened for user root by test-server(uid=501)
Apr 11 10:39:11 test-server su(pam_unix)[3037]: session opened for user dhkim by test-server(uid=0)
Apr 11 10:53:35 test-server ftpd[3383]: wu-ftpd - TLS settings: control allow, client_cert allow, data allow
Apr 11 10:53:38 test-server ftpd[3383]: FTP session closed
Apr 11 11:06:34 test-server sshd(pam_unix)[3671]: session opened for user test-server by (uid=501)
Apr 11 11:17:22 test-server ftpd[3929]: wu-ftpd - TLS settings: control allow, client_cert allow, data allow
Apr 11 11:17:23 test-server ftpd[3929]: FTP session closed
Apr 11 11:51:18 test-server sshd(pam_unix)[976]: session closed for user root
Apr 11 11:51:23 test-server sshd(pam_unix)[4645]: session opened for user root by (uid=0)
Apr 11 11:56:08 test-server sshd(pam_unix)[3671]: session closed for user test-server
Apr 11 12:25:04 test-server login(pam_unix)[2388]: session closed for user test-server
Apr 11 13:00:23 test-server login(pam_unix)[6192]: session opened for user test-server by (uid=0)
Apr 11 13:00:23 test-server -- test-server[6192]: LOGIN ON pts/2 BY test-server FROM 61.74.194.138
Apr 11 13:00:47 test-server su(pam_unix)[6241]: session opened for user root by test-server(uid=501)
Apr 11 13:00:50 test-server su(pam_unix)[6277]: session opened for user root by test-server(uid=0)
Apr 11 13:00:53 test-server su(pam_unix)[6308]: session opened for user dhkim by test-server(uid=0)
Apr 11 13:25:10 test-server login(pam_unix)[1488]: session closed for user test-server
Apr 11 13:25:10 test-server su(pam_unix)[3037]: session closed for user dhkim
Apr 11 13:25:10 test-server su(pam_unix)[2999]: session closed for user root
Apr 11 13:36:48 test-server su(pam_unix)[7107]: session opened for user root by test-server(uid=502)
댓글 달기