Proftp를 돌리는데 ftp접속후 다운로드 하면 서버가 다운됩니다.

이진환의 이미지


안녕하세요
ProFtp로 ftp서비스 하고있습니다.

그런데 제가 아직 초보라서 실수하거나 빼먹은 부분이 있는지
ftp로 test라는 유저로 접속해 파일을 다운받고 있는 중에 서버가 다운됩니다.
(서버 전체가 멈춰버립니다. 모든 키가 안먹히고 어쩔수 없으 리셋시켜줘야합니다.)

혹시나 공유기 문제인가 해서 내부 아이피로 접속하면 외부 아이피로 접속할 때 보단 좀 오래 가다 역시 다운됩니다.

현지 ProFTPD Version 1.3.1rc2 를 쓰고있고

proftpd.conf 설정 파일 내용입니다. 혹시 여기서 문제가 있을 수 있나요..?

***********************************************************************************
#This is a basic ProFTPD configuration file (rename it to
# 'proftpd.conf' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.

ServerName "ProFTPD Default Installation"
ServerType standalone
DefaultServer on

# Port 21 is the standard FTP port.
Port 21

# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances 30

# Set the user and group under which the server will run.
User nobody
Group nobody

# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
#DefaultRoot ~

# Normally, we want files to be overwriteable.
AllowOverwrite on

# Bar use of SITE CHMOD by default

DenyAll

# A basic anonymous configuration, no upload directories. If you do not
# want anonymous users, simply delete this entire section.

User ftp
Group ftp

# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp

# Limit the maximum number of anonymous logins
MaxClients 10

# We want 'welcome.msg' displayed at login, and '.message' displayed
# in each newly chdired directory.
DisplayLogin welcome.msg
DisplayFirstChdir .message

# Limit WRITE everywhere in the anonymous chroot

DenyAll


****************************************************************************

꼭좀 부탁드립니다 ..

warpdory의 이미지

아마도 /var/log/messages 하고 /var/log/xferlog 정도 되는 파일들이 있을텐데... 그 내용을 보면 죽기전에 컴퓨터가 왜 죽는지를 말해주는 메시지가 들어 있을 겁니다.

그걸 보면 대충 이유를 짐작할 수 있습니다.

가끔 .. 왜 죽는지.. 말도 못하고 죽는 경우는 ... 정말 애매해 집니다. ...


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.
http://akpil.egloos.com


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

이진환의 이미지

Feb 9 16:52:24 localhost proftpd[1023]: localhost.localdomain (211.200.160.160[211.200.160.160]) - FTP session opened.
Feb 9 16:52:24 localhost proftpd[1024]: localhost.localdomain (211.200.160.160[211.200.160.160]) - FTP session opened.
Feb 9 16:52:42 localhost proftpd[1026]: localhost.localdomain (211.200.160.160[211.200.160.160]) - FTP session opened.
Feb 9 16:52:42 localhost proftpd[1027]: localhost.localdomain (211.200.160.160[211.200.160.160]) - FTP session opened.
Feb 9 16:56:15 localhost syslogd 1.4-0: restart.
Feb 9 16:56:15 localhost 2월 9 16:56:15 syslog: syslogd startup succeeded
Feb 9 16:56:15 localhost kernel: klogd 1.4-0, log source = /proc/kmsg started.
Feb 9 16:56:15 localhost kernel: Inspecting /boot/System.map-2.4.3-12
Feb 9 16:56:16 localhost 2월 9 16:56:15 syslog: klogd startup succeeded
Feb 9 16:56:16 localhost 2월 9 16:56:16 portmap: portmap startup succeeded
Feb 9 16:56:16 localhost kernel: Loaded 14873 symbols from /boot/System.map-2.4.3-12.
Feb 9 16:56:16 localhost kernel: Symbols match kernel version 2.4.3.
Feb 9 16:56:16 localhost kernel: Loaded 161 symbols from 7 modules.
Feb 9 16:56:16 localhost kernel: Linux version 2.4.3-12 (root@porky.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-85)) #1 Fri Jun 8 15:05:56 EDT 2001
Feb 9 16:56:16 localhost kernel: BIOS-provided physical RAM map:
Feb 9 16:56:16 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 0000000000100000 - 000000000bef0000 (usable)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 000000000bef0000 - 000000000beffc00 (ACPI data)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 000000000beffc00 - 000000000bf00000 (ACPI NVS)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 000000000bf00000 - 000000000c000000 (reserved)
Feb 9 16:56:16 localhost kernel: BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Feb 9 16:56:16 localhost 2월 9 16:56:16 nfslock: rpc.statd startup succeeded
Feb 9 16:56:16 localhost kernel: On node 0 totalpages: 48880
Feb 9 16:56:16 localhost kernel: zone(0): 4096 pages.
Feb 9 16:56:16 localhost kernel: zone(1): 44784 pages.
Feb 9 16:56:16 localhost kernel: zone(2): 0 pages.
Feb 9 16:56:16 localhost kernel: Local APIC disabled by BIOS -- reenabling.
Feb 9 16:56:16 localhost kernel: Found and enabled local APIC!
Feb 9 16:56:16 localhost kernel: Kernel command line: auto BOOT_IMAGE=linux ro root=305 BOOT_FILE=/boot/vmlinuz-2.4.3-12
Feb 9 16:56:16 localhost kernel: Initializing CPU#0
Feb 9 16:56:16 localhost kernel: Detected 801.831 MHz processor.
Feb 9 16:56:16 localhost kernel: Console: colour VGA+ 80x25
Feb 9 16:56:16 localhost kernel: Calibrating delay loop... 1599.07 BogoMIPS
Feb 9 16:56:16 localhost kernel: Memory: 188364k/195520k available (1235k kernel code, 5244k reserved, 94k data, 244k init, 0k highmem)
Feb 9 16:56:16 localhost kernel: Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Feb 9 16:56:16 localhost kernel: Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Feb 9 16:56:16 localhost kernel: Page-cache hash table entries: 65536 (order: 7, 524288 bytes)
Feb 9 16:56:16 localhost kernel: Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Feb 9 16:56:16 localhost kernel: VFS: Diskquotas version dquot_6.5.0 initialized
Feb 9 16:56:16 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Feb 9 16:56:16 localhost kernel: CPU: L2 cache: 256K
Feb 9 16:56:16 localhost kernel: Intel machine check architecture supported.
Feb 9 16:56:16 localhost kernel: Intel machine check reporting enabled on CPU#0.
Feb 9 16:56:16 localhost rpc.statd[569]: Version 0.3.1 Starting
Feb 9 16:56:16 localhost kernel: CPU serial number disabled.
Feb 9 16:56:16 localhost 2월 9 16:56:16 keytable: Loading keymap:
Feb 9 16:56:16 localhost kernel: CPU: Intel Pentium III (Coppermine) stepping 06
Feb 9 16:56:16 localhost kernel: Enabling fast FPU save and restore... done.
Feb 9 16:56:16 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 9 16:56:16 localhost kernel: Checking 'hlt' instruction... OK.
Feb 9 16:56:16 localhost kernel: POSIX conformance testing by UNIFIX
Feb 9 16:56:16 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Feb 9 16:56:16 localhost kernel: mtrr: detected mtrr type: Intel
Feb 9 16:56:16 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd990, last bus=1
Feb 9 16:56:16 localhost kernel: PCI: Using configuration type 1
Feb 9 16:56:16 localhost kernel: PCI: Probing PCI hardware
Feb 9 16:56:16 localhost kernel: Unknown bridge resource 2: assuming transparent
Feb 9 16:56:16 localhost kernel: PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
Feb 9 16:56:16 localhost kernel: isapnp: Scanning for PnP cards...
Feb 9 16:56:16 localhost kernel: isapnp: No Plug & Play device found
Feb 9 16:56:16 localhost kernel: Linux NET4.0 for Linux 2.4
Feb 9 16:56:16 localhost kernel: Based upon Swansea University Computer Society NET3.039
Feb 9 16:56:16 localhost kernel: Initializing RT netlink socket
Feb 9 16:56:16 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Feb 9 16:56:16 localhost kernel: Starting kswapd v1.8
Feb 9 16:56:16 localhost kernel: pty: 2048 Unix98 ptys configured
Feb 9 16:56:16 localhost kernel: block: queued sectors max/low 124920kB/41640kB, 384 slots per queue
Feb 9 16:56:16 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Feb 9 16:56:16 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Feb 9 16:56:16 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 9 16:56:16 localhost kernel: PIIX4: IDE controller on PCI bus 00 dev f9
Feb 9 16:56:16 localhost kernel: PIIX4: chipset revision 2
Feb 9 16:56:16 localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
Feb 9 16:56:16 localhost kernel: ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
Feb 9 16:56:16 localhost kernel: ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
Feb 9 16:56:16 localhost kernel: hda: QUANTUM FIREBALLlct15 30, ATA DISK drive
Feb 9 16:56:16 localhost kernel: hdc: SAMSUNG SC-148P, ATAPI CD/DVD-ROM drive
Feb 9 16:56:16 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 9 16:56:16 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 9 16:56:16 localhost kernel: hda: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=3649/255/63, UDMA(66)
Feb 9 16:56:16 localhost kernel: Partition check:
Feb 9 16:56:16 localhost kernel: hda: hda1 hda2 < hda5 hda6 >
Feb 9 16:56:17 localhost kernel: Floppy drive(s): fd0 is 1.44M
Feb 9 16:56:17 localhost kernel: FDC 0 is a National Semiconductor PC87306
Feb 9 16:56:17 localhost kernel: Serial driver version 5.05a (2001-03-20) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Feb 9 16:56:17 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Feb 9 16:56:17 localhost kernel: PCI: Found IRQ 11 for device 00:1f.6
Feb 9 16:56:17 localhost kernel: Real Time Clock Driver v1.10d
Feb 9 16:56:17 localhost kernel: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Feb 9 16:56:17 localhost kernel: md.c: sizeof(mdp_super_t) = 4096
Feb 9 16:56:17 localhost kernel: autodetecting RAID arrays
Feb 9 16:56:17 localhost kernel: autorun ...
Feb 9 16:56:17 localhost kernel: ... autorun DONE.
Feb 9 16:56:17 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 9 16:56:17 localhost kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Feb 9 16:56:17 localhost kernel: IP: routing cache hash table of 1024 buckets, 8Kbytes
Feb 9 16:56:17 localhost kernel: TCP: Hash tables configured (established 16384 bind 16384)
Feb 9 16:56:17 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Feb 9 16:56:17 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Feb 9 16:56:17 localhost kernel: VFS: Mounted root (ext2 filesystem) readonly.
Feb 9 16:56:17 localhost kernel: Freeing unused kernel memory: 244k freed
Feb 9 16:56:17 localhost kernel: Adding Swap: 393552k swap-space (priority -1)
Feb 9 16:56:17 localhost kernel: usb.c: registered new driver usbdevfs
Feb 9 16:56:17 localhost kernel: usb.c: registered new driver hub
Feb 9 16:56:17 localhost kernel: usb-uhci.c: $Revision: 1.251 $ time 15:24:59 Jun 8 2001
Feb 9 16:56:17 localhost kernel: usb-uhci.c: High bandwidth mode enabled
Feb 9 16:56:17 localhost kernel: PCI: Found IRQ 10 for device 00:1f.2
Feb 9 16:56:17 localhost kernel: PCI: Setting latency timer of device 00:1f.2 to 64
Feb 9 16:56:17 localhost kernel: usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 10
Feb 9 16:56:17 localhost kernel: usb-uhci.c: Detected 2 ports
Feb 9 16:56:17 localhost kernel: usb.c: new USB bus registered, assigned bus number 1
Feb 9 16:56:17 localhost kernel: hub.c: USB hub found
Feb 9 16:56:17 localhost kernel: hub.c: 2 ports detected
Feb 9 16:56:17 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 2
Feb 9 16:56:17 localhost kernel: usb.c: USB device 2 (vend/prod 0x1267/0x210) is not claimed by any active driver.
Feb 9 16:56:17 localhost kernel: usb.c: registered new driver hid
Feb 9 16:56:17 localhost kernel: input0: USB HID v1.00 Mouse [ PS/2+USB Mouse] on usb1:2.0
Feb 9 16:56:17 localhost kernel: mice: PS/2 mouse device common for all mice
Feb 9 16:56:17 localhost kernel: Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Feb 9 16:56:17 localhost kernel: SMSC Super-IO detection, now testing Ports 2F0, 370 ...
Feb 9 16:56:17 localhost kernel: 0x378: FIFO is 16 bytes
Feb 9 16:56:17 localhost kernel: 0x378: writeIntrThreshold is 8
Feb 9 16:56:17 localhost kernel: 0x378: readIntrThreshold is 8
Feb 9 16:56:17 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
Feb 9 16:56:17 localhost kernel: parport0: irq 7 detected
Feb 9 16:56:17 localhost kernel: ip_conntrack (1527 buckets, 12216 max)
Feb 9 16:56:17 localhost kernel: 8139too Fast Ethernet driver 0.9.17
Feb 9 16:56:17 localhost kernel: PCI: Found IRQ 5 for device 01:0a.0
Feb 9 16:56:17 localhost kernel: PCI: The same IRQ used for device 01:0e.0
Feb 9 16:56:17 localhost kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xcc865000, 00:50:fc:c5:bb:d3, IRQ 5
Feb 9 16:56:17 localhost kernel: eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
Feb 9 16:56:17 localhost kernel: eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
Feb 9 16:56:17 localhost 2월 9 16:56:17 keytable:
Feb 9 16:56:17 localhost 2월 9 16:56:17 keytable: Loading system font:
Feb 9 16:56:17 localhost 2월 9 16:56:17 keytable:
Feb 9 16:56:17 localhost 2월 9 16:56:17 rc: Starting keytable: succeeded
Feb 9 16:56:17 localhost 2월 9 16:56:17 rc: Starting pcmcia: succeeded
Feb 9 16:56:17 localhost 2월 9 16:56:17 random: Initializing random number generator: succeeded
Feb 9 16:55:58 localhost rc.sysinit: Mounting proc filesystem: succeeded
Feb 9 16:55:58 localhost sysctl: net.ipv4.ip_forward = 0
Feb 9 16:55:58 localhost sysctl: net.ipv4.conf.all.rp_filter = 1
Feb 9 16:55:58 localhost sysctl: kernel.sysrq = 0
Feb 9 16:55:58 localhost rc.sysinit: Configuring kernel parameters: succeeded
Feb 9 16:55:58 localhost date: 금 2월 9 16:54:41 GMT 2007
Feb 9 16:55:58 localhost rc.sysinit: Setting clock (localtime): 금 2월 9 16:54:41 GMT 2007 succeeded
Feb 9 16:55:58 localhost rc.sysinit: Loading default keymap succeeded
Feb 9 16:55:58 localhost rc.sysinit: Setting default font (lat0-16): succeeded
Feb 9 16:55:58 localhost rc.sysinit: Activating swap partitions: succeeded
Feb 9 16:55:58 localhost rc.sysinit: Setting hostname localhost.localdomain: succeeded
Feb 9 16:55:58 localhost rc.sysinit: Mounting USB filesystem: succeeded
Feb 9 16:55:58 localhost rc.sysinit: Initializing USB controller (usb-uhci): succeeded
Feb 9 16:55:58 localhost rc.sysinit: Initializing USB HID interface: succeeded
Feb 9 16:55:58 localhost rc.sysinit: Initializing USB mouse: succeeded
Feb 9 16:55:58 localhost fsck: / was not cleanly unmounted, check forced.
Feb 9 16:55:58 localhost fsck: /: |
Feb 9 16:55:58 localhost fsck: Deleted inode 182365 has zero dtime. FIXED.
Feb 9 16:55:58 localhost fsck: /: Deleted inode 182366 has zero dtime. FIXED.
Feb 9 16:55:58 localhost fsck: /: Deleted inode 182367 has zero dtime. FIXED.
Feb 9 16:55:58 localhost fsck: /: Deleted inode 182368 has zero dtime. FIXED.
Feb 9 16:55:58 localhost fsck: /: Deleted inode 182369 has zero dtime. FIXED.
Feb 9 16:55:58 localhost fsck: Inode 1327429, i_blocks is 64, should be 8. FIXED.
Feb 9 16:55:58 localhost fsck: /: Inode 1327435, i_blocks is 64, should be 8. FIXED.
Feb 9 16:55:58 localhost fsck: Inode 1737282, i_blocks is 64, should be 8. FIXED.
Feb 9 16:55:58 localhost fsck: Inode 1917619, i_blocks is 64, should be 24. FIXED.
Feb 9 16:55:58 localhost fsck: Inode 2490532, i_blocks is 64, should be 40. FIXED.
Feb 9 16:55:58 localhost fsck: /: Inode 2490790, i_blocks is 64, should be 48. FIXED.
Feb 9 16:55:58 localhost fsck: /:
Feb 9 16:55:58 localhost fsck: Inode 2490789, i_blocks is 272, should be 224. FIXED.
Feb 9 16:55:58 localhost fsck: /: 82919/2867200 files (0.1% non-contiguous), 524792/5725156 blocks
Feb 9 16:55:58 localhost rc.sysinit: Checking root filesystem succeeded
Feb 9 16:55:58 localhost rc.sysinit: Remounting root filesystem in read-write mode: succeeded
Feb 9 16:56:19 localhost 2월 9 16:55:59 rc.sysinit: Finding module dependencies: succeeded
Feb 9 16:56:00 localhost fsck: /boot was not cleanly unmounted, check forced.
Feb 9 16:56:01 localhost fsck: /boot: 26/14056 files (0.0% non-contiguous), 5197/56196 blocks
Feb 9 16:56:19 localhost 2월 9 16:56:01 rc.sysinit: Checking filesystems succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:01 rc.sysinit: Mounting local filesystems: succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:01 rc.sysinit: Turning on user and group quotas for local filesystems: succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:02 rc.sysinit: Enabling swap space: succeeded
Feb 9 16:56:04 localhost init: Entering runlevel: 5
Feb 9 16:56:19 localhost 2월 9 16:56:04 kudzu: Updating /etc/fstab succeeded
Feb 9 16:56:13 localhost /etc/hotplug/usb.agent: ... no drivers for USB product 0/0/0
Feb 9 16:56:19 localhost 2월 9 16:56:14 kudzu: succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:14 sysctl: net.ipv4.ip_forward = 0
Feb 9 16:56:19 localhost 2월 9 16:56:14 sysctl: net.ipv4.conf.all.rp_filter = 1
Feb 9 16:56:19 localhost 2월 9 16:56:14 sysctl: kernel.sysrq = 0
Feb 9 16:56:19 localhost 2월 9 16:56:14 network: Setting network parameters: succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:14 network: Bringing up interface lo: succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:15 ifup: Determining IP information for eth0...
Feb 9 16:56:15 localhost pumpd[469]: starting at (uptime 0 days, 0:01:42) Fri Feb 9 16:56:15 2007
Feb 9 16:56:19 localhost 2월 9 16:56:15 ifup: done.
Feb 9 16:56:19 localhost 2월 9 16:56:15 network: Bringing up interface eth0: succeeded
Feb 9 16:56:19 localhost 2월 9 16:56:19 netfs: Mounting other filesystems: succeeded
Feb 9 16:56:19 localhost apmd[669]: Version 3.0final (APM BIOS 1.2, Linux driver 1.14)
Feb 9 16:56:19 localhost 2월 9 16:56:19 apmd: apmd startup succeeded
Feb 9 16:56:19 localhost apmd[669]: Charge: * * * (-1% unknown)
Feb 9 16:56:20 localhost automount[718]: starting automounter version 3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc
Feb 9 16:56:20 localhost 2월 9 16:56:20 autofs: autofs startup succeeded
Feb 9 16:56:20 localhost 2월 9 16:56:20 atd: atd startup succeeded
Feb 9 16:56:20 localhost 2월 9 16:56:20 sshd: Starting sshd:
Feb 9 16:56:20 localhost automount[718]: using kernel protocol version 3
Feb 9 16:56:20 localhost 2월 9 16:56:20 sshd: succeeded
Feb 9 16:56:20 localhost 2월 9 16:56:20 sshd:
Feb 9 16:56:21 localhost 2월 9 16:56:21 rc: Starting sshd: succeeded
Feb 9 16:56:21 localhost xinetd[765]: chargen disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: chargen disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: daytime disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: daytime disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: echo disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: echo disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: finger disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: ntalk disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: exec disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: login disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: shell disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: rsync disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: talk disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: telnet disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: time disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: time disabled, removing
Feb 9 16:56:21 localhost xinetd[765]: xinetd Version 2.3.0 started with libwrap options compiled in.
Feb 9 16:56:21 localhost xinetd[765]: Started working: 0 available services
Feb 9 16:56:24 localhost xinetd: xinetd startup succeeded
Feb 9 16:56:26 localhost 2월 9 16:56:26 sendmail: sendmail startup succeeded
Feb 9 16:56:26 localhost 2월 9 16:56:26 gpm: gpm startup succeeded
Feb 9 16:56:27 localhost 2월 9 16:56:27 crond: crond startup succeeded
Feb 9 16:56:27 localhost 2월 9 16:56:27 xfs: xfs startup succeeded
Feb 9 16:56:27 localhost xfs: listening on port 7100
Feb 9 16:56:27 localhost 2월 9 16:56:27 anacron: anacron startup succeeded
Feb 9 16:56:30 localhost proftpd[926]: localhost.localdomain - ProFTPD 1.3.1rc2 (devel) (built 금 2월 9 02:25:00 GMT 2007) standalone mode STARTUP
Feb 9 16:56:38 localhost kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Feb 9 16:56:38 localhost kernel: agpgart: Maximum main memory to use for agp memory: 148M
Feb 9 16:56:38 localhost kernel: agpgart: Detected an Intel i810 E Chipset.
Feb 9 16:56:38 localhost kernel: agpgart: detected 4MB dedicated video ram.
Feb 9 16:56:38 localhost kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Feb 9 16:56:38 localhost modprobe: modprobe: Can't locate module char-major-145
Feb 9 16:56:38 localhost modprobe: modprobe: Can't locate module char-major-145
Feb 9 16:56:38 localhost kernel: [drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
Feb 9 16:56:38 localhost kernel: [drm] Initialized i810 1.1.0 20000928 on minor 63
Feb 9 16:56:39 localhost kernel: mtrr: 0xf8000000,0x2000000 overlaps existing 0xf8000000,0x400000
Feb 9 16:56:39 localhost sshd(pam_unix)[947]: session opened for user root by (uid=0)

5번째 줄 보면 그냥 말없이 restart 이렇게 되있네요..;;
해결 하는데 도움이 될수 있을련지 ㅜㅜ

ydhoney의 이미지

우선 로그 메세지는 기본적으로 확인하시구요.

ftp로 뭘 하다가 죽었다고 ftp가 문제일거라는 확답을 드릴 순 없습니다.

단순히 시스템 부하량 증가나 I/O 사용량 증가만으로도 시스템이 죽을 수 있는것이니까요. 물론 그런 경우에는 시스템에 중대한 결함이 있어서 그렇거나 메모리를 이상하게 쓰거나 하는 문제가 발생하였기 때문에 죽었겠지요.

그리고 요즘은 굳이 사용자 관리를 mysql로 한다거나 하는게 아니라면 굳이 proftpd를 쓸 이유는 없지요. 별로 탐탁찮기도 하고 -_-
 
 
====================여기부터 식은어치====================
안녕하세요. 저는 야동 초등학교 2학년 6반 11번입니다!! 제 컴퓨터에 리눅스를 깔아보고 싶습니다. 리눅스라는건 어제 처음 들어 보았습니다.
리눅스에서도 카트라이더는 되겠지요? 설마 안되나요? 안되면 왜 쓰나요? =3=33 리눅스에서는 카트라이더 캐릭터 머리가 너무 커서 못받아들이나요?

김정균의 이미지

그리고 요즘은 굳이 사용자 관리를 mysql로 한다거나 하는게 아니라면 굳이 proftpd를 쓸 이유는 없지요. 별로 탐탁찮기도 하고 -_-

왜요? 전 잘 쓰고 있는데 ^^; 오히려 vsftpd 가 더 마음에 들지 않던데요 ㅋㅋ 폄하를 하려면 구체적인 이유를 적어 주셔야지.. "별로 탐탁지 않다는" 아주 주관적이고 어정쩡한 이유를 보편적인 이유로 만들어 버리는 것은 별로 보기 좋지 않습니다.

전 별 이유 없이 vsftpd 보다 proftpd 를 더 많이 아는 이유로 proftpd 를 선호합니다. 그리고 proftpd 에서 사용하는 기능 중에서 vsftpd 에서 지원하지 않는 (아니면 내가 못찾은 또는 찾기 귀찮은 (--)..) 것이 proftpd 를 선호하는 이유중에 하나입니다.

이렇게 적는 것이 맞겠죠. 특히 질답은 개인 의견을 전달하는 포럼 같은 곳이 아니라 질문과 답변이 오가는 곳이기 때문에 좀 더 신중하게 글을 올려야 한다고 생각합니다.

댓글 달기

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.