이상한 /etc/fstab

# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#

#

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda1 /boot ext2 noatime 1 2
/dev/hda3 / ext3 noatime 0 1
/dev/hdd1 /home/webterror/www/data/data01 ext3 defaults 0 0
/dev/sda1 /home/webterror/www/data/data02 ext3 defaults 0 0
/dev/sdb1 /home/webterror/www/data/data03 ext3 defaults 0 0

#/dev/fd0 /mnt/floppy auto noauto 0 0

/dev/hda2 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0

# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0

이렇게 함 바꿔 보시죠?

위에 fstab파일에서 마운트 위치가 알파벳 순서로 리스트업되어야 제대로 인식 된다는 걸 어디서 들은적이 있는거 같아서요.

저는 커널에서 뭔가 잘 못 설정해줘서 그런지 sata가 sda 가 아니라 hdg 로 뜨더군요.

/dev 를 검색해 보시고 sd* 와 hd* 가 어떤 것이 뜨는지 확인해 보시고...
만약 coldplug 나 udev 가 webterror 님이 예상한 것과 다른 이름으로 생성해 줬다면 그에 맞춰서 fstab을 수정해 줘야 할 것 같습니다;

akudoku.net