php게시판에 글을 올리는데 10MB이상의 큰 파일이 안올라가는군

익명 사용자의 이미지

얼마전 서버의 운영체제를 redhat 7.2에서 7.0으로 다운그레이드 했습니
다. 몇가지 커널의 문제로 인해서
암튼 그런 후 A.P.M 을 다시 수동으로 컴파일하고 백업했던 홈페이지와
SQL DB를 복구했습니다.
잘 작동합니다. 그러나 자료실의 업로드 용량이 10MB 넘으면 한참 올리다
가 찾을수 없는 페이지라는 I.E의 특유의 이상 페이지를 화면에 뿌리고 업
로드에는 실패합니다.
당근 php.ini에는 upload_max_filesize = 100M 으로 되어 있고
max_execution_time = 600 도 이렇게 변경되어 있습니다.

apache 버젼은 1.3.27 PHP는 버젼 4.2.2 MySQL은 3.23.52입니다.

A.P.M을 지우고 수동으로 다시 컴파일해도 마찬가지 입니다. 버젼을 여러
개를 가지고 확인해봤습니다.
아직 운영체제를 다시 설치하지는 않았습니다. 운영체제는
와우리욱스7.0 까치 이며 RPM으로 설치되어 있던 A.P.M은 모두 지우고 컴
파일 했습니다.
제가 보기에 연결 섹션이 계속 유지 되지 않는것 같은데요..
원인만이라도 알면 해결가능할 것 같습니다.

이런 상황을 경험해보신분들 글 부탁드립니다.

allco의 이미지

저도 같은문제에 고민중인데요.
저의 경우는 redhat 9 의 apache 2.0.40 이거든요 그거 그냥 rpm으로 설치 해서 사용하는데 파일 업로드가 1M가 넘으면 바로 그런 현상이 일어나는데. 안되서 다른 컴에 /또 설치해서 테스트 해보았는데 역시 그런 현상이 일어 납니다.
물론 php.ini수정은 완료 한 상태이구요
그리고 게시판은 jsboard를 사용하여 테스트.

그런데 netscape 으로 시도를 해보니 에러 메시지가 뜨는데
The document contains no data
라는 메시지 입니다.
물론 ie에서는 열수 없다는 창이 뜨지만요.

그래서 몇가지의테스트를더진행해 보았는데. 그중에 하나는 그냥 파일 업을받는 루틴을 만들어 해보았더니 역시 세션이 닫혀 버리고 말더군요. 아마 이것은 서비스 공격으로 보고 막아 버린것은 아닌지 의심이 가는데... 쩝..

apache.org에 가서 영문 참고자료를 뒤져 보았더니 컴파일시 뭔가 잘못되어 있다는 것 같은데 워낙 영어에 자신이 없어서..
그럼 배포판이 컴파일이 잘못되었다는 것인데 그말은 틀린거 같구. 하여간에 머리 좀 복잡합니다.
혹시 누구 아는 사람 없습니까?

rapzzard의 이미지

흔히 하시는 실수가..
php.ini에서 upload_max_filesize와 max_execution_time만 조정하는게 있습니다..
파일을 업로드할때 어떤식으로 서버에 전송되는지 아신다면 아마..
post_max_size 또한 변경하셨을겁니다..
당연히 post자체에서 제한이 걸리므로 아무리 업로드파일의 사이즈 제한을 올린다고 하더라도..마찬가지의 에러가 뜨는거죠..
아마 post_max_size를 늘리시면 문제가 해결될 겁니다..

allco의 이미지

다음 제 컴에 있는 것입니다.
아무리 봐도 설정의 문제는 아닌거 같은데.. 저의 착각인지...
[PHP]

;;;;;;;;;;;
; WARNING ;
;;;;;;;;;;;
; This is the default settings file for new PHP installations.
; By default, PHP installs itself with a configuration suitable for
; development purposes, and *NOT* for production purposes.
; For several security-oriented considerations that should be taken
; before going online with your site, please consult php.ini-recommended
; and http://php.net/manual/en/security.php.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overridden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
engine = On

; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
short_open_tag = On

; Allow ASP-style <% %> tags.
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
y2k_compliance = Off

; Output buffering allows you to send header lines (including cookies) even
; after you send body content, at the price of slowing PHP's output layer a
; bit. You can enable output buffering during runtime by calling the output
; buffering functions. You can also enable output buffering for all files by
; setting this directive to On. If you wish to limit the size of the buffer
; to a certain size - you can use a maximum number of bytes instead of 'On', as
; a value for this directive (e.g., output_buffering=4096).
output_buffering = Off

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "ob_gzhandler", output will be
; transparently compressed for browsers that support gzip or deflate encoding.
; Setting an output handler automatically turns on output buffering.
output_handler =

; The unserialize callback function will called (with the undefind class'
; name as parameter), if the unserializer finds an undefined class
; which should be instanciated.
; A warning appears if the specified function is not defined, or if the
; function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func=

; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
;
; Note: output_handler must be empty if this is set 'On' !!!!
;
zlib.output_compression = Off

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
implicit_flush = Off

; Whether to enable the ability to force arguments to be passed by reference
; at function call time. This method is deprecated and is likely to be
; unsupported in future versions of PHP/Zend. The encouraged method of
; specifying which arguments should be passed by reference is in the function
; declaration. You're encouraged to try and turn this option Off and make
; sure your scripts work properly with it in order to ensure they will work
; with future versions of the language (you will receive a warning each time
; you use this feature, and the argument will be passed by value instead of by
; reference).
allow_call_time_pass_reference = On

; Safe Mode
;
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
safe_mode_exec_dir =

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file.
;
;open_basedir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
;
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won't be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
disable_functions =

; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <font color="??????"> would work.
highlight.string = #CC0000
highlight.comment = #FF9900
highlight.keyword = #006600
highlight.bg = #FFFFFF
highlight.default = #0000CC
highlight.html = #000000

;
; Misc
;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

max_execution_time = 120 ; Maximum execution time of each script, in seconds
memory_limit = 8M ; Maximum amount of memory a script may consume (8MB)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; error_reporting is a bit-field. Or each number up to get desired error
; reporting level
; E_ALL - All errors and warnings
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
;
; Examples:
;
; - Show all errors, except for notices
;
;error_reporting = E_ALL & ~E_NOTICE
;
; - Show only errors
;
;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
;
; - Show all errors except for notices
;
error_reporting = E_ALL & ~E_NOTICE

; Print out errors (as a part of the output). For production web sites,
; you're strongly encouraged to turn this feature off, and use error logging
; instead (see below). Keeping display_errors enabled on a production web site
; may reveal security information to end users, such as file paths on your Web
; server, your database schema or other information.
display_errors = On

; Even when display_errors is on, errors that occur during PHP's startup
; sequence are not displayed. It's strongly recommended to keep
; display_startup_errors off, except for when debugging.
display_startup_errors = Off

; Log errors into a log file (server-specific log, stderr, or error_log (below))
; As stated above, you're strongly advised to use error logging in place of
; error displaying on production web sites.
log_errors = Off

; Store the last error/warning message in $php_errormsg (boolean).
track_errors = Off

; Disable the inclusion of HTML tags in error messages.
;html_errors = Off

; String to output before an error message.
;error_prepend_string = "<font color=ff0000>"

; String to output after an error message.
;error_append_string = "</font>"

; Log errors to specified file.
;error_log = filename

; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog

; Warn if the + operator is used with strings.
warn_plus_overloading = Off

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3

; The separator used in PHP generated URLs to separate arguments.
; Default is "&".
;arg_separator.output = "&amp;"

; List of separator(s) used by PHP to parse input URLs into variables.
; Default is "&".
; NOTE: Every character in this directive is considered as separator!
;arg_separator.input = ";&"

; This directive describes the order in which PHP registers GET, POST, Cookie,
; Environment and Built-in variables (G, P, C, E & S respectively, often
; referred to as EGPCS or GPC). Registration is done from left to right, newer
; values override older values.
variables_order = "EGPCS"

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don't want to clutter your scripts' global scope
; with user data. This makes most sense when coupled with track_vars - in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
;
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
register_globals = Off

; This directive tells PHP whether to declare the argv&argc variables (that
; would contain the GET information). If you don't use these variables, you
; should turn it off for increased performance.
register_argc_argv = On

; Maximum size of POST data that PHP will accept.
post_max_size = 8M

; This directive is deprecated. Use variables_order instead.
gpc_order = "GPC"

; Magic quotes
;

; Magic quotes for incoming GET/POST/Cookie data.
magic_quotes_gpc = On

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ' with '' instead of \').
magic_quotes_sybase = Off

; Automatically add files before or after any PHP document.
auto_prepend_file =
auto_append_file =

; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"

; Always populate the $HTTP_RAW_POST_DATA variable.
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =

; The directory under which PHP opens the script using /~usernamem used only
; if nonempty.
user_dir =

; Directory in which the loadable extensions (modules) reside.
extension_dir = /usr/lib/php4

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
upload_max_filesize = 8M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
allow_url_fopen = On

; Define the anonymous ftp password (your email address)
;from="john@doe.com"

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
;
; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example:
;
; extension=msql.so
;
; Note that it should be the name of the module only; no directory information
; needs to go here. Specify the location of the extension with the
; extension_dir directive above.

;;;;
; Note: For Red Hat Linux, packaged extension modules are now loaded via
; the ini files in the directory /etc/php.d.
;;;;

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
define_syslog_variables = Off

[mail function]
; For Win32 only.
SMTP = localhost

; For Win32 only.
sendmail_from = me@localhost.com

; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
sendmail_path = /usr/sbin/sendmail -t -i

[Java]
;java.class.path = .\php_java.jar
;java.home = c:\jdk
;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
;java.library.path = .\

[SQL]
sql.safe_mode = Off

[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented

; Allow or prevent persistent links.
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of uodbc.defaultlrl and uodbc.defaultbinmode
odbc.defaultbinmode = 1

[MySQL]
; Allow or prevent persistent links.
mysql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
mysql.default_socket =

; Default host for mysql_connect() (doesn't apply in safe mode).
mysql.default_host =

; Default user for mysql_connect() (doesn't apply in safe mode).
mysql.default_user =

; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo cfg_get_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
mysql.default_password =

[mSQL]
; Allow or prevent persistent links.
msql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
msql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
msql.max_links = -1

[PostgresSQL]
; Allow or prevent persistent links.
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect(). Need a little overhead.
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
pgsql.max_links = -1

[Sybase]
; Allow or prevent persistent links.
sybase.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
sybase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybase.max_links = -1

;sybase.interface_file = "/usr/sybase/interfaces"

; Minimum error severity to display.
sybase.min_error_severity = 10

; Minimum message severity to display.
sybase.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
; If on, this will cause PHP to automatically assign types to results according
; to their Sybase type, instead of treating them all as strings. This
; compatability mode will probably not stay around forever, so try applying
; whatever necessary changes to your code, and turn it off.
sybase.compatability_mode = Off

[Sybase-CT]
; Allow or prevent persistent links.
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
sybct.max_links = -1

; Minimum server message severity to display.
sybct.min_server_severity = 10

; Minimum client message severity to display.
sybct.min_client_severity = 10

[bcmath]
; Number of decimal digits for all bcmath functions.
bcmath.scale = 0

[browscap]
;browscap = extra/browscap.ini

[Informix]
; Default host for ifx_connect() (doesn't apply in safe mode).
ifx.default_host =

; Default user for ifx_connect() (doesn't apply in safe mode).
ifx.default_user =

; Default password for ifx_connect() (doesn't apply in safe mode).
ifx.default_password =

; Allow or prevent persistent links.
ifx.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
ifx.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ifx.max_links = -1

; If on, select statements return the contents of a text blob instead of its id.
ifx.textasvarchar = 0

; If on, select statements return the contents of a byte blob instead of its id.
ifx.byteasvarchar = 0

; Trailing blanks are stripped from fixed-length char columns. May help the
; life of Informix SE users.
ifx.charasvarchar = 0

; If on, the contents of text and byte blobs are dumped to a file instead of
; keeping them in memory.
ifx.blobinfile = 0

; NULL's are returned as empty strings, unless this is set to 1. In that case,
; NULL's are returned as string 'NULL'.
ifx.nullformat = 0

[Session]
; Handler used to store/retrieve data.
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
session.save_path = /tmp

; Whether to use cookies.
session.use_cookies = 1

; Name of the session (used as cookie name).
session.name = PHPSESSID

; Initialize session on request startup.
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
session.cookie_lifetime = 0

; The path for which the cookie is valid.
session.cookie_path = /

; The domain for which the cookie is valid.
session.cookie_domain =

; Handler used to serialize data. php is the standard serializer of PHP.
session.serialize_handler = php

; Percentual probability that the 'garbage collection' process is started
; on every session initialization.
session.gc_probability = 1

; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
session.gc_maxlifetime = 1440

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
session.referer_check =

; How many bytes to read from the file.
session.entropy_length = 0

; Specified here to create the session id.
session.entropy_file =

;session.entropy_length = 16

;session.entropy_file = /dev/urandom

; Set to {nocache,private,public} to determine HTTP caching aspects.
session.cache_limiter = nocache

; Document expires after n minutes.
session.cache_expire = 180

; use transient sid support if enabled by compiling with --enable-trans-sid.
session.use_trans_sid = 1

url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatability mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

[Assertion]
; Assert(expr); active by default.
;assert.active = On

; Issue a PHP warning for each failed assertion.
;assert.warning = On

; Don't bail out by default.
;assert.bail = Off

; User-function to be called if an assertion fails.
;assert.callback = 0

; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
;assert.quiet_eval = 0

[Ingres II]
; Allow or prevent persistent links.
ingres.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
ingres.max_persistent = -1

; Maximum number of links, including persistents. -1 means no limit.
ingres.max_links = -1

; Default database (format: [node_id::]dbname[/srv_class]).
ingres.default_database =

; Default user.
ingres.default_user =

; Default password.
ingres.default_password =

[Verisign Payflow Pro]
; Default Payflow Pro server.
pfpro.defaulthost = "test-payflow.verisign.com"

; Default port to connect to.
pfpro.defaultport = 443

; Default timeout in seconds.
pfpro.defaulttimeout = 30

; Default proxy IP address (if required).
;pfpro.proxyaddress =

; Default proxy port.
;pfpro.proxyport =

; Default proxy logon.
;pfpro.proxylogon =

; Default proxy password.
;pfpro.proxypassword =

[Sockets]
; Use the system read() function instead of the php_read() wrapper.
sockets.use_system_read = On

[com]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
;com.typelib_file =
; allow Distributed-COM calls
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
;com.autoregister_typelib = true
; register constants casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constat registrations
;com.autoregister_verbose = true

[Printer]
;printer.default_printer = ""

[mbstring]
;mbstring.internal_encoding = EUC-JP
;mbstring.http_input = auto
;mbstring.http_output = SJIS
;mbstring.detect_order = auto
;mbstring.substitute_character = none;

[FrontBase]
;fbsql.allow_persistent = On
;fbsql.autocommit = On
;fbsql.default_database =
;fbsql.default_database_password =
;fbsql.default_host =
;fbsql.default_password =
;fbsql.default_user = "_SYSTEM"
;fbsql.generate_warnings = Off
;fbsql.max_connections = 128
;fbsql.max_links = 128
;fbsql.max_persistent = -1
;fbsql.max_results = 128
;fbsql.batchSize = 1000

; Local Variables:
; tab-width: 4
; End:

kookooo의 이미지

allco wrote:
저도 같은문제에 고민중인데요.
저의 경우는 redhat 9 의 apache 2.0.40 이거든요 그거 그냥 rpm으로 설치 해서 사용하는데 파일 업로드가 1M가 넘으면 바로 그런 현상이 일어나는데. 안되서 다른 컴에 /또 설치해서 테스트 해보았는데 역시 그런 현상이 일어 납니다.

/etc/httpd/conf.d/php.conf 를 확인해 보십시요..

LimitRequestBody 524288

이 값을 늘려 주시기 바랍니다.

allco의 이미지

거기에는 미처 생각을 못했군요.. 감사
httpd.conf에 임의로 설정을 해도 안되더니
그곳에 그런 설정이 있는지를 확인하지 못했군요.. 쩝.
정말 고맙습니다.

kookooo의 이미지

allco wrote:
거기에는 미처 생각을 못했군요.. 감사
httpd.conf에 임의로 설정을 해도 안되더니
그곳에 그런 설정이 있는지를 확인하지 못했군요.. 쩝.
정말 고맙습니다.

redhat 9.0 부터 변경되었습니다. 8.0 부터인가? -_-;;; 가물 가물하지만....

암턴 이런 문제가 있을때
/var/log/httpd/error_log 를 유심히 보십시요..

gnobus의 이미지

kookooo wrote:

LimitRequestBody 524288

이 값을 늘려 주시기 바랍니다.

오~ 감사합니다. 밤새도록 찾아 해맸는데 여기서 답을 찾았습니다.

참고로, 젠투 1.4 에서

apache-2.0.48
mysql-4.0.14
mod_php-4.3.3

설치하고 jsboard 2.0.6 에서 파일이 조금만 커져도 업로드가 안 되서 고민중이었지요.
php.ini 하고 jsboard 의 global.ph를 아무리 고쳐도 안 됐는데...ㅋㅋ

제 경우에는 설정 파일이

/etc/apache2/conf/modules.d/70_mod_php.conf

이 놈이더군요. 힌트 보고 금방 찾았습니다. :lol:

댓글 달기

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.