와우7.1에서 g450사용상 문제점입니다.

와우 7.1설치했는데 x가 실행이 안되더군요. 드라이 설정하는데 MGA G450,삼
성 750DF라서 기본적으로 드라이버 지원 됩니다. 근데 X가 되질 않는군요...
고수님들 혹시 G450그래픽카드는 설정 따로 잡아줘야하나요? 아님 VIA칩 보드
인데 그것이 문제인가요? ㅡㅜ 저랑 같은 경험으로 고생하신분이나 해결책을
아시는 분은 꼭 리플 부탁드립니다.

그래픽 G450
모니터 750DF
디폴트 1024*768 16bit컬러

-------------아래글은 dmesg와 XF86Config 파일입니다.---------------------
--> dmesg
[root@localhost /etc]# dmesg
Linux version 2.4.2-2wl (root@jhkim.wowlinux.com) (gcc version 2.96
20000731 (Red Hat Linux 7.1 2.96-85)) #1 금 6월 8 052158 KST 2001
BIOS-provided physical RAM map
BIOS-e820 000000000009e800 @ 0000000000000000 (usable)
BIOS-e820 0000000000001800 @ 000000000009e800 (reserved)
BIOS-e820 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820 000000001feec000 @ 0000000000100000 (usable)
BIOS-e820 0000000000003000 @ 000000001ffec000 (ACPI data)
BIOS-e820 0000000000010000 @ 000000001ffef000 (reserved)
BIOS-e820 0000000000001000 @ 000000001ffff000 (ACPI NVS)
BIOS-e820 0000000000010000 @ 00000000ffff0000 (reserved)
On node 0 totalpages 131052
zone(0) 4096 pages.
zone DMA has max 32 cached pages.
zone(1) 126956 pages.
zone Normal has max 991 cached pages.
zone(2) 0 pages.
zone HighMem has max 1 cached pages.
Kernel command line auto BOOT_IMAGE=linux ro root=2109
BOOT_FILE=/boot/vmlinuz-2.4.2-2wl
Initializing CPU#0
Detected 1007.315 MHz processor.
Console colour VGA+ 80x25
Calibrating delay loop... 2005.40 BogoMIPS
Memory 512532k/524208k available (1567k kernel code, 11284k reserved,
94k data, 528k init, 0k highmem)
Dentry-cache hash table entries 65536 (order 7, 524288 bytes)
Buffer-cache hash table entries 32768 (order 5, 131072 bytes)
Page-cache hash table entries 131072 (order 8, 1048576 bytes)
Inode-cache hash table entries 32768 (order 6, 262144 bytes)
VFS Diskquotas version dquot_6.5.0 initialized
CPU Before vendor init, caps 0183f9ff c1c7f9ff 00000000, vendor = 2
CPU L1 I Cache 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU L2 Cache 256K (64 bytes/line)
CPU After vendor init, caps 0183f9ff c1c7f9ff 00000000 00000000
CPU After generic, caps 0183f9ff c1c7f9ff 00000000 00000000
CPU Common caps 0183f9ff c1c7f9ff 00000000 00000000
CPU AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr detected mtrr type Intel
PCI PCI BIOS revision 2.10 entry at 0xf1150, last bus=1
PCI Using configuration type 1
PCI Probing PCI hardware
Unknown bridge resource 0 assuming transparent
PCI Using IRQ router VIA [1106/0686] at 0004.0
isapnp Scanning for PnP cards...
isapnp No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
pty 256 Unix98 ptys configured
block queued sectors max/low 340309kB/209237kB, 1024 slots per queue
RAMDISK driver initialized 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision 6.31
ide Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE IDE controller on PCI bus 00 dev 21
VP_IDE chipset revision 6
VP_IDE not 100% native mode will probe irqs later
ide Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0004.1
ide0 BM-DMA at 0xd800-0xd807, BIOS settings hdapio, hdbpio
ide1 BM-DMA at 0xd808-0xd80f, BIOS settings hdcpio, hddDMA
PDC20265 IDE controller on PCI bus 00 dev 88
PCI Found IRQ 10 for device 0011.0
PCI The same IRQ used for device 000b.0
PCI The same IRQ used for device 000b.1
PDC20265 chipset revision 2
PDC20265 not 100% native mode will probe irqs later
PDC20265 (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2 BM-DMA at 0x8000-0x8007, BIOS settings hdeDMA, hdfDMA
ide3 BM-DMA at 0x8008-0x800f, BIOS settings hdgDMA, hdhpio
hda IRQ probe failed (0xfffffff8)
hda IRQ probe failed (0xfffffff8)
hda no response (status = 0x0a), resetting drive
hda IRQ probe failed (0xfffffff8)
hda no response (status = 0x0a)
hdb IRQ probe failed (0xfffffff8)
hdb IRQ probe failed (0xfffffff8)
hdb no response (status = 0x0a), resetting drive
hdb IRQ probe failed (0xfffffff8)
hdb no response (status = 0x0a)
hdd CRD-8483B, ATAPI CD/DVD-ROM drive
hde IC35L040AVER07-0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x9400-0x9407,0x9002 on irq 10
hde 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA
(100)
Partition check
hde [PTBL] [5005/255/63] hde1 hde2 < hde5 hde6 hde7 hde8 hde9 >
Floppy drive(s) fd0 is 1.44M
FDC 0 is a post-1991 82077
Serial driver version 5.02 (2000-08-09) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4 Linux TCP/IP 1.0 for NET4.0
IP Protocols ICMP, UDP, TCP, IGMP
IP routing cache hash table of 4096 buckets, 32Kbytes
TCP Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4 Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory 528k freed
Adding Swap 257000k swap-space (priority -1)
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378 FIFO is 16 bytes
0x378 writeIntrThreshold is 8
0x378 readIntrThreshold is 8
0x378 PWord is 8 bits
0x378 Interrupts are ISA-Pulses
0x378 possible IRQ conflict!
0x378 ECP port cfgA=0x10 cfgB=0x00
0x378 ECP settings irq= dma= other means>
parport0 PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,COMPAT,ECP]
parport0 cpp_daisy aa5500ff(38)
parport0 assign_addrs aa5500ff(38)
parport0 cpp_daisy aa5500ff(38)
parport0 assign_addrs aa5500ff(38)
parport_pc Via 686A parallel port io=0x378, irq=7, dma=3
Trying to free free DMA3
ip_conntrack (4095 buckets, 32760 max)
8139too Fast Ethernet driver 0.9.15 loaded
PCI Found IRQ 5 for device 000a.0
eth0 RealTek RTL8139 Fast Ethernet at 0xe083b000, 00e04c391245,
IRQ 5
eth0 Identified 8139 chip type 'RTL-8139C'
PCI Found IRQ 11 for device 000c.0
eth1 RealTek RTL8139 Fast Ethernet at 0xe083d000, 0000e89d6d10,
IRQ 11
eth1 Identified 8139 chip type 'RTL-8139B'
eth0 Setting half-duplex based on auto-negotiated partner ability 0000.
eth1 Setting half-duplex based on auto-negotiated partner ability 0000.
eth0 Promiscuous mode enabled.
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart Maximum main memory to use for agp memory 439M
agpgart Detected Via Apollo Pro KT133 chipset
agpgart AGP aperture is 32M @ 0xe6000000
[drm] AGP 0.99 on VIA Apollo KT133 @ 0xe6000000 32MB
mtrr type mismatch for e6000000,2000000 old write-back new write-
combining
[drm] Initialized mga 2.0.1 20000928 on minor 63
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
[drm] Process 1093 dead (ctx 1, d_s = 0x00)
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
[drm] Process 1101 dead (ctx 2, d_s = 0x00)
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
[drm] Process 1105 dead (ctx 3, d_s = 0x00)
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
[drm] Process 1109 dead (ctx 4, d_s = 0x00)
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
mtrr type mismatch for e4000000,2000000 old write-back new write-
combining
[drm] Process 1113 dead (ctx 5, d_s = 0x00)

--->XF86Config

# File generated by anaconda.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/7100"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# NoTrapSignals

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

# DontZap

# Uncomment this to disable the / mode
switching
# sequences. This allows clients to receive these key events.

# DontZoom
EndSection

# Pointer section
# **********************************************************************

Section "Pointer"
Protocol "IMPS/2"
Device "/dev/input/mice"
"XF86Config" 482L, 16336C

# Pointer section
# **********************************************************************

Section "Pointer"
Protocol "IMPS/2"
Device "/dev/input/mice"

# For wheel support - can not be used with Emulate3Buttons
#
# ZAxisMapping 4 5

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Protocol "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice
# BaudRate 9600
# SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Emulate3Buttons
Emulate3Timeout 50

# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle

EndSection

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"
Protocol "Standard"

AutoRepeat 500 5

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Protocol "Xqueue"

# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
# ServerNumLock

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Xleds 1 2 3

# To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock

LeftAlt Meta
RightAlt Meta
ScrollLock Compose
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with
# XkbLayout "de"
# or
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use
# XkbOptions "ctrlswapcaps"
#
# If you'd like to disable the capslock key, use
# XkbOptions "ctrlnocaps"

XkbRules "xfree86"
XkbModel "pc105"
XkbLayout "us"
#XkbVariant ""
#XkbOptions ""
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync 31.5
# VertRefresh 60
HorizSync 35.15
VertRefresh 55-65

# ModeLine "640x480" 25.175 640 664 760 800
# 480 491 493 525

# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024
600 601 603 625
EndSection

Section "Monitor"
Identifier "SAM1156"
VendorName "Unknown"
ModelName "Unknown"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30 - 85

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50 - 160

# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.

# These two are equivalent

# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817
Interlace

# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode

# This is a set of standard mode timings. Modes that are out of monitor
spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# --320x200--
# 320x200 @ 70 Hz, 31.5 kHz hsync, 85 aspect ratio
Modeline "320x200" 12.588 320 336 384 400
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.

# --320x200--
# 320x200 @ 70 Hz, 31.5 kHz hsync, 85 aspect ratio
Modeline "320x200" 12.588 320 336 384 400
200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 43 aspect ratio
Modeline "320x240" 12.588 320 336 384 400
240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400
240 244 246 262 Doublescan
# --400x300--
# 400x300 @ 56 Hz, 35.2 kHz hsync, 43 aspect ratio
ModeLine "400x300" 18 400 416 448 512
300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528
300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520
300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 85 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616
300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632
300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632
300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624
300 319 322 333 Doublescan

# Normal video modes

# -- 512x384
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640
384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640
384 385 388 404 -HSync -VSync

# -- 640x400 --
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800
400 409 411 450
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832
400 401 404 445 -HSync +VSync

# --- 640x480 ---
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800
480 491 493 525
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864
480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840
480 481 484 500 -HSync -VSync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832
480 481 484 509 -HSync -VSync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864
480 488 494 530 -HSync -VSync

# --- 800x600 ---
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024
600 601 603 625
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056
600 601 605 628 +hsync +vsync
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040
600 637 643 666 +hsync +vsync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088
600 616 621 657 -HSync -VSync
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088
600 604 610 640 -HSync -VSync

# --- 1024x768 ---
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344
768 771 777 806 -hsync -vsync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328
768 771 777 806 -hsync -vsync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360
768 784 787 823
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408
768 782 788 822 -HSync -VSync
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440
768 771 781 802 -HSync -VSync

# --- 1152x864 ---
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680
864 868 876 892 -HSync -VSync
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552
864 864 876 908
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776
864 864 876 908
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536
864 866 885 902 -HSync -VSync

# -- 1280x1024 --
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712
1024 1025 1028 1054
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696
1024 1032 1040 1068 -HSync -VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712
1024 1027 1030 1064
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664
1024 1027 1030 1064
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728
1024 1025 1028 1072 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696
1024 1031 1046 1072 -HSync -VSync

# -- 1400x1050 --
# 1400x1050 @ 60Hz, 65.8 kHz hsync
Modeline "1400x1050" 129 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 70Hz, 76.8 kHz hsync
Modeline "1400x1050" 151 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 75Hz, 82.3 kHz hsync
Modeline "1400x1050" 162 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# 1400x1050 @ 85Hz, 93.2 kHz hsync
Modeline "1400x1050" 184 1400 1464 1656 1960
1050 1051 1054 1100 +HSync +VSync

# -- 1600x1200 --
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160
1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160
1200 1201 1204 1250 -HSync -VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080
1200 1204 1207 1244 +HSync +VSync

# -- 1800x1400 --

# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392
1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392
1440 1441 1444 1490 +HSync +VSync

# -- 1920x1200 --

# 1920x1200 @ 70Hz, 87.50 KHz hsync
Modeline "1920x1200" 230 1920 1936 2096 2528
1200 1201 1204 1250 +HSync +VSync

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
Identifier "Generic VGA Card"
VendorName "Unknown"
BoardName "Unknown"
Chipset "generic"
EndSection

Section "Device"
Identifier "Matrox Millennium G450"
VideoRam 32768
EndSection

# **********************************************************************
# Screen section
# **********************************************************************

# The kernel framebuffer server
Section "Screen"
Driver "fbdev"
Device "Generic VGA Card"
Monitor "SAM1156"
Subsection "Display"
# Depth 16
Depth 16
Modes "default"
EndSubsection
# The 16-color VGA server
Section "Screen"
Driver "vga16"
Device "Generic VGA Card"
Monitor "SAM1156"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection

# The Mono server
Section "Screen"
Driver "vga2"
Device "Generic VGA Card"
Monitor "SAM1156"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection

# The svga server
Section "Screen"
Driver "svga"
Device "Matrox Millennium G450"
Monitor "SAM1156"
DefaultColorDepth 16

Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection

# The accel server
Section "Screen"
Driver "accel"
Device "Matrox Millennium G450"
Monitor "SAM1156"
DefaultColorDepth 16

Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection

---긴글 읽어주시느라 정말 감사드립니다. 꼭 리플 부탁드립니다.-----