[Q] xine 설치가 잘 되지 않아요.

http://xinehq.de
위 사이트에서 xine-lib-1-rc4.tar.gz를 받아서 다음과 같이 설치했습니다.
$./configure
$make
$make install

플레이를 하기 위해 gxine-0.3.3.tar.gz를 받아 설치하려고 하는데 configure에서 다음과 같은 에러가 발생합니다.
( /etc/ld.so.conf 에는 /usr/src/lib 를 추가 했습니다.)

$./configure
...생략...
checking for xine-config... /usr/local/bin/xine-config
checking for XINE-LIB version >= 1.0.0... no
*** Could not run XINE test program, checking why...
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding XINE or finding the wrong
*** version of XINE. If it is not finding XINE, you'll need to set your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location Also, make sure you have run ldconfig if that
*** is required on your system
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying LD_LIBRARY_PATH
***
configure: error: *** Please install xine-lib first ***
[root@dvb gxine-0.3.3]#