우분투 듀얼모니터 D-sub와 DVI질문입니다.
글쓴이: System.JS / 작성시간: 월, 2008/01/07 - 2:42오전
안녕하세요..
우분투 gutsy 사용하고있습니다.
제가 D-sub랑 DVI 모니터 2대가 있어서 듀얼로 구성했습니다.듀얼로 쓰구있구요..
근데 문제는 계속 D-sub가 주 모니터로 잡힌다는 점입니다.
sudo nvidia-settings 으로도 수정해봤구 /etc/X11/xorg.conf에 들어가서도
수정해봤는데.. 제가못하는건인지 계속 D-Sub가 메인X로 고정이 되더군요.. ;;
왠만한건 다따라해봤는데 안되네요 ;;
DVI가 메인X로 잡힐려면 어떻게 해야하죠?
$ xorg.conf
Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 1 "Screen1" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "kr"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "HPC"
HorizSync 31.0 - 75.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "HPC"
HorizSync 31.0 - 75.0
VertRefresh 50.0 - 150.0
EndSection
Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
EndSection
Section "Screen"
Identifier "Screen0"
Device "nVidia Corporation NV34 [GeForce FX 5200]"
Monitor "Monitor1"
DefaultDepth 24
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: 1280x1024 +1280+0, DFP: nvidia-auto-select +0+0"
EndSectionForums:
Option "metamodes"
Option "metamodes" "CRT: 1280x1024 +1280+0, DFP: nvidia-auto-select +0+0"
CRT와 DFP의 순서를 바꾸어 보셨나요?
네
네 바꾸어 보았습니다..
안되더군요..;;
저도 그런 문제였는데...
Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" ...삽질하다가 성공한 설정입니다.
=======================================
아프다...
=======================================
.
댓글 달기