우분투 7.10 듀얼 모니터 질문입니다.

안녕하세요.. 새해 잘보내시구요 ^^

우분투 듀얼모니터 설정이 잘안되어서요 뭐가 문제가있는지 잘모르겠네요

우분투 7.10 이구요

제가 DVI(LCD) 모니터 / D-sub(CRT) 모니터 이렇게 2개가 있거든요..

sudo nvidia-settings 에서 X server Display conf 에서 레이아웃을 설정하였습니다.

LCD / CRT 모두 1280X1204로 설정하였구요

LCD쪽에 포지션을 Absolute로 놓았구요.. CRT쪽에는 Right of로 놓았는데 재부팅하면서 자꾸 Absolute로 바뀌네요..

지금 X의 주모니터가 CRT 입니다. Nvidia의 경우 D-sub가 먼저 인식된다는 글을봣었는데요..

여러가지 검색해보았지만 계속 CRT가 주 모니터로 잡히는 현상이 있습니다.

복구모드 몇번 들어갔다 왔습니다 --;;

DVI가 주 모니터로 잡히는 설정좀 가르쳐주세요..

아래는 /etc/X11/xorg.conf 파일 내용 입니다.

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerFlags"
Option "Xinerama" "0"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "kr"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "일반 모니터"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "HPC"
HorizSync 31.0 - 75.0
VertRefresh 50.0 - 150.0
EndSection

Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5200"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5200]"
Monitor "일반 모니터"
DefaultDepth 24
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "1"
Option "metamodes" "CRT: 1280x1024 +1280+0, DFP: nvidia-auto-select +0+0"
EndSection

감사합니다.!