페도라6에 오라클10g 설치시 문제 해결 좀 부탁드려요!
오라클 설치 초반에 체크하는 부분에서 2가지 실패가 떳습니다;
페도라4에선 아무문제 없이 깔렸는데 6에선 왜 그런지 모르겠네요..
여기저기 찾아봤는데 페도라6+오라클 에대한 글을 찾기 어려워서 질문드립니다.
질문 1: 다음과 같은 경고가 생겼는데 실제메모리를 늘려주는 방법이 있다면 가르켜주세요~
Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 484MB
Check complete. The overall result of this check is: Failed
Problem: The system does not have sufficient physical memory to perform the install.
Recommendation: Increase the amount of physical memory available to your system before continuing with the installation.
질문 2: 두번째로 이런에러가 떳는데요.. 페도라 설치시 정적IP로 설정해서 설치했거든요.. 뭐가 문제인지 알 수 있을까요?
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
다른부분은 어떻게 찾아서 에러를 해결햇는데 이 두가지에대해선 찾기가 어렵네요.. 부탁드립니다!
1. 뭐하는데 쓰는지는
1. 뭐하는데 쓰는지는 몰라도 메모리를 절반 가까이를 뭘 하는데 쓰고 계시군요.
메모리 늘리는 방법이 별다른가요? 그냥 사서 다는거죠 -_-
2. Installation Guide를 참조하라는군요. -_- 뭐 static ip를 쓰셨다고는 하는데 진짜로 static인지 다시 한번 확인하세요 -_- 설정 확인하시고 뭔가 이상하시면 우선 시스템 리부팅부터 해보시길..
기본적으로 오라클 설치하기 전에 기 설정되어야 하는 내용들은 설정 다 하셨겠지요? 이전에도 해보신 것 같으니 말이지요 :-|
==
아 씨끄러 씨끄러~ 조용해!!
레드햇 9 이하 사용금지!
댓글 달기