우분투 브리지 + ati9250 + dual 설치하기...
글쓴이: yshwindow / 작성시간: 월, 2006/01/23 - 8:09오후
우분투 브리지 + ati9250 + dual 설치하고 있습니다만 잘 안되네요...
ati 홈페이지에서 ATI Driver Installer 8.21.7 을 다운받아 Installer instructions에
따라서 드라이버를 설치했고, /usr/X11R6/bin/aticonfig를 실행하여 xorg.conf를
구성하였습니다.
aticonfig 옵션은..
sudo ./aticonfig --initial=dual-head --dtop=horizontal --screen-layout=right --iagp=off -v
와 같이 주었습니다...
xorg.conf는 다음과 같습니다.
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# paths to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 0"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig Monitor 1"
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon 9200 Pro (RV280)"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 0"
Driver "fglrx"
Option "(null)"
Option "DesktopSetup" "Horizontal,Reverse"
Option "UseInternalAGPGART" "off"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "ATI Graphics Adapter 1"
Driver "fglrx"
BusID "PCI:1:0:1"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
# Device "ATI Technologies, Inc. Radeon 9200 Pro (RV280)"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 0"
Device "ATI Graphics Adapter 0"
Monitor "aticonfig Monitor 0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig Screen 1"
Device "ATI Graphics Adapter 1"
Monitor "aticonfig Monitor 1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "aticonfig Screen 0" 0 0
Screen 1 "aticonfig Screen 1" RightOf "aticonfig Screen 0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Identifier "Default Screen"
는 기존의 것입니다...
그리고 그래픽 카드는 다음과 같이 잡혀있습니다.
toma@toma:/etc/X11$ lspci | grep ATI 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) 0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev 01)
흠... 드라이버가 잘 못 잡혀있는건가요???
위와같이 실행했을시에..
시스템/기본 설정/화면해상도에 2048x1024가 나오며. 선택시 이 해상도로 나오게 됩니다.
허나 모니터 한쪽만 나올뿐 right쪽은 나오지 않습니다... ㅡㅡ;; 절반이 안나오는...
정말 가슴이 아픕니다... 어찌해야 할까요???
아.. 그리고 DVI를 사용하는 모니터가 좀 흐릿한데... ati 그래픽카드 사용하시는 분들 원래 이런가요? 반품할까 생각중입니다... ㅡㅡ;
그럼 답변 부탁드리겠습니다..
Forums:
댓글 달기