[질문] ubuntu에서 TV수신카드를 설치하고 싶습니다.

푸른·가람의 이미지

TV수신카드를 사용하려는 목적은 TV수신카드를 통해서 PS2를 즐기기 위함입니다. ;; 윈도우컴퓨터가 AS로 날아가서 즐길 거리가 떨어졌는데, 마침 (중고로) 산지 얼마 안 되어서 한 번도 써 보지 않은 TV수신카드가 눈에 들어와서 이걸로 PS2나 즐겨보자ㅡ 하고 시작했으니까요.

TV 수신카드는 ON-AIR TV입니다.

제가 리눅스를 접한지 얼마 안 되는 리눅맹이라서 어느정도의 정보를 드려야 하는지를 잘 몰라, 다른 질문글들을 볼 때 있는 정보 제시부분을 따라서 흉내 내 보았습니다. 더 필요한 정보가 있으면 그 정보를 얻는 방법도 함께 부탁드리겠습니다.

lsmod시 다음과 같은 정보가 나옵니다.

Quote:

rfcomm 34972 0
l2cap 22404 5 rfcomm
bluetooth 43012 4 rfcomm,l2cap
speedstep_lib 4228 0
cpufreq_userspace 4444 0
cpufreq_stats 5124 0
freq_table 4484 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 5916 0
cpufreq_conservative 6820 0
radeon 68352 1
drm 58004 2 radeon
video 16004 0
tc1100_wmi 6916 0
sony_acpi 5516 0
pcc_acpi 11392 0
hotkey 9508 0
dev_acpi 11396 0
i2c_acpi_ec 5760 0
button 6672 0
battery 9604 0
container 4608 0
ac 4996 0
ipv6 217408 15
floppy 52692 0
pcspkr 3652 0
rtc 11832 0
ohci1394 30644 0
bt878 9912 0
msp3400 23336 0
bttv 141456 1 bt878
video_buf 19844 1 bttv
firmware_class 9472 1 bttv
i2c_algo_bit 8584 1 bttv
v4l2_common 5888 1 bttv
btcx_risc 4872 1 bttv
tveeprom 12568 1 bttv
i2c_core 19728 5 i2c_acpi_ec,msp3400,bttv,i2c_algo_bit,tveeprom
videodev 9344 1 bttv
snd_intel8x0 30144 2
snd_ac97_codec 72188 1 snd_intel8x0
snd_pcm_oss 46368 0
snd_mixer_oss 16128 1 snd_pcm_oss
snd_pcm 78344 4 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21764 2 snd_pcm
snd 48644 8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10120 2 snd_intel8x0,snd_pcm
tpm_atmel 5504 0
tpm_nsc 6528 0
tpm 9504 2 tpm_atmel,tpm_nsc
hw_random 5268 0
shpchp 80612 0
pci_hotplug 24628 1 shpchp
intel_agp 21276 1
agpgart 32328 2 drm,intel_agp
dm_mod 50364 1
tsdev 7616 0
evdev 9088 0
sr_mod 15652 0
sbp2 21128 0
scsi_mod 124872 2 sr_mod,sbp2
ieee1394 90936 2 ohci1394,sbp2
psmouse 26116 0
mousedev 10912 1
parport_pc 31812 1
lp 11460 0
parport 32072 2 parport_pc,lp
md 40656 0
ext3 115976 1
jbd 48536 1 ext3
thermal 13192 0
processor 23100 1 thermal
fan 4740 0
e100 32768 0
8139too 23552 0
8139cp 18432 0
mii 5248 3 e100,8139too,8139cp
ehci_hcd 29448 0
uhci_hcd 28048 0
usbcore 104316 3 ehci_hcd,uhci_hcd
ide_disk 16128 4
ide_cd 36996 0
cdrom 33952 2 sr_mod,ide_cd
ide_generic 1664 0
piix 9476 1
ide_core 125268 4 ide_disk,ide_cd,ide_generic,piix
unix 24624 776
vesafb 8088 0
capability 5000 0
commoncap 6784 1 capability
vga16fb 12232 1
vgastate 8320 1 vga16fb
softcursor 2432 2 vesafb,vga16fb
cfbimgblt 2944 2 vesafb,vga16fb
cfbfillrect 3840 2 vesafb,vga16fb
cfbcopyarea 4480 2 vesafb,vga16fb
fbcon 34176 72
tileblit 2560 1 fbcon
font 8448 1 fbcon
bitblit 5248 1 fbcon

dmesg를 했을 때의 결과는 다음과 같습니다.

Quote:

[4294668.794000] VFS: Disk quotas dquot_6.5.1
[4294668.794000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.794000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294668.794000] devfs: boot_options: 0x0
[4294668.794000] Initializing Cryptographic API
[4294668.794000] isapnp: Scanning for PnP cards...
[4294669.149000] isapnp: No Plug & Play device found
[4294669.164000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[4294669.166000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.166000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.166000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294669.166000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.166000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294669.168000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.168000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294669.168000] io scheduler noop registered
[4294669.168000] io scheduler anticipatory registered
[4294669.168000] io scheduler deadline registered
[4294669.168000] io scheduler cfq registered
[4294669.169000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.169000] EISA: Probing bus 0 at eisa.0
[4294669.169000] EISA: Detected 0 cards.
[4294669.169000] NET: Registered protocol family 2
[4294669.178000] IP: routing cache hash table of 16384 buckets, 128Kbytes
[4294669.178000] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[4294669.180000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.180000] TCP: Hash tables configured (established 524288 bind 65536)
[4294669.181000] NET: Registered protocol family 8
[4294669.181000] NET: Registered protocol family 20
[4294669.181000] ACPI wakeup devices:
[4294669.181000] TANA P0P3 AC97 USB0 USB1 USB2 USB3 USB7 UAR1 SLPB
[4294669.181000] ACPI: (supports S0 S1 S3 S4 S5)
[4294669.181000] Freeing unused kernel memory: 224k freed
[4294669.196000] vga16fb: initializing
[4294669.196000] vga16fb: mapped to 0xc00a0000
[4294669.327000] Console: switching to colour frame buffer device 80x30
[4294669.327000] fb0: VGA16 VGA frame buffer device
[4294669.335000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294670.440000] Capability LSM initialized
[4294670.450000] NET: Registered protocol family 1
[4294670.464000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.464000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.464000] ACPI: bus type ide registered
[4294670.471000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294670.471000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294670.471000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[4294670.471000] ICH5: chipset revision 2
[4294670.471000] ICH5: not 100% native mode: will probe irqs later
[4294670.471000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[4294670.471000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[4294670.471000] Probing IDE interface ide0...
[4294671.143000] hda: GCR-8523B, ATAPI CD/DVD-ROM drive
[4294671.857000] hdb: HL-DT-ST GCE-8321B, ATAPI CD/DVD-ROM drive
[4294671.908000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.908000] Probing IDE interface ide1...
[4294672.172000] hdc: ST380011A, ATA DISK drive
[4294672.427000] hdd: SAMSUNG SP0802N, ATA DISK drive
[4294672.478000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.478000] Probing IDE interface ide2...
[4294672.991000] Probing IDE interface ide3...
[4294673.503000] Probing IDE interface ide4...
[4294674.015000] Probing IDE interface ide5...
[4294674.535000] hda: ATAPI 52X CD-ROM drive, 128kB Cache
[4294674.535000] Uniform CD-ROM driver Revision: 3.20
[4294674.540000] hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
[4294674.544000] hdc: max request size: 1024KiB
[4294674.544000] hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294674.545000] hdc: cache flushes supported
[4294674.545000] /dev/ide/host0/bus1/target0/lun0: p1 p2 < p5 >
[4294674.581000] hdd: max request size: 1024KiB
[4294674.581000] hdd: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294674.581000] hdd: cache flushes supported
[4294674.581000] /dev/ide/host0/bus1/target1/lun0: p1
[4294674.948000] Attempting manual resume
[4294674.948000] swsusp: Suspend partition has wrong signature?
[4294674.969000] usbcore: registered new driver usbfs
[4294674.969000] usbcore: registered new driver hub
[4294674.969000] USB Universal Host Controller Interface driver v2.2
[4294674.969000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294674.969000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294674.969000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
[4294675.031000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294675.031000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[4294675.031000] hub 1-0:1.0: USB hub found
[4294675.031000] hub 1-0:1.0: 2 ports detected
[4294675.034000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[4294675.034000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294675.034000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
[4294675.096000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294675.096000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[4294675.096000] hub 2-0:1.0: USB hub found
[4294675.096000] hub 2-0:1.0: 2 ports detected
[4294675.099000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[4294675.099000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.099000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3
[4294675.161000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.161000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[4294675.161000] hub 3-0:1.0: USB hub found
[4294675.161000] hub 3-0:1.0: 2 ports detected
[4294675.164000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[4294675.164000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294675.164000] uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
[4294675.226000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294675.226000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[4294675.226000] hub 4-0:1.0: USB hub found
[4294675.226000] hub 4-0:1.0: 2 ports detected
[4294675.255000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[4294675.255000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294675.255000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
[4294675.255000] ehci_hcd 0000:00:1d.7: debug port 1
[4294675.255000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294675.255000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffaffc00
[4294675.259000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294675.259000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294675.259000] hub 5-0:1.0: USB hub found
[4294675.259000] hub 5-0:1.0: 8 ports detected
[4294675.337000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294675.337000] 8139cp: pci dev 0000:02:01.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294675.337000] 8139cp: Try the "8139too" driver instead.
[4294675.338000] 8139too Fast Ethernet driver 0.9.27
[4294675.338000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 22
[4294675.339000] eth0: RealTek RTL8139 at 0xc800, 00:0e:2e:27:b3:35, IRQ 22
[4294675.339000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294675.353000] e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
[4294675.353000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294675.353000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294675.376000] e100: eth1: e100_probe: addr 0xff9fe000, irq 20, MAC addr 00:11:11:45:A0:DD
[4294677.864000] ACPI: CPU0 (power states: C1[C1])
[4294677.864000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294678.047000] Attempting manual resume
[4294678.074000] swsusp: Suspend partition has wrong signature?
[4294678.101000] kjournald starting. Commit interval 5 seconds
[4294678.101000] EXT3-fs: mounted filesystem with ordered data mode.
[4294679.187000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294682.682000] Adding 2650684k swap on /dev/hdc5. Priority:-1 extents:1
[4294682.944000] EXT3 FS on hdc1, internal journal
[4294687.637000] parport: PnPBIOS parport detected.
[4294687.637000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294687.723000] lp0: using parport0 (interrupt-driven).
[4294687.744000] mice: PS/2 mouse device common for all mice
[4294687.833000] ieee1394: Initialized config rom entry `ip1394'
[4294687.839000] SCSI subsystem initialized
[4294687.847000] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
[4294688.108000] input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
[4294688.427000] ts: Compaq touchscreen protocol output
[4294690.157000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294690.997000] cdrom: open failed.
[4294690.998000] cdrom: open failed.
[4294693.357000] Linux agpgart interface v0.101 (c) Dave Jones
[4294693.365000] agpgart: Detected an Intel 865 Chipset.
[4294693.382000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294693.465000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294693.475000] shpchp: shpc_init : shpc_cap_offset == 0
[4294693.475000] shpchp: shpc_init : shpc_cap_offset == 0
[4294693.475000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294693.799000] hw_random hardware driver 1.0.0 loaded
[4294694.196000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
[4294694.196000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294694.508000] intel8x0_measure_ac97_clock: measured 49401 usecs
[4294694.508000] intel8x0: clocking to 48000
[4294694.911000] Linux video capture interface: v1.00
[4294694.952000] bttv: driver version 0.9.15 loaded
[4294694.952000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294694.955000] bttv: Bt8xx card found (0).
[4294694.956000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[4294694.956000] bttv0: Bt878 (rev 17) at 0000:02:00.0, irq: 21, latency: 32, mmio: 0xf6afe000
[4294694.956000] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[4294694.956000] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[4294694.965000] tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
[4294694.965000] bttv0: using tuner=-1
[4294694.965000] bttv0: i2c: checking for MSP34xx @ 0x80... found
[4294695.011000] msp34xx: init: chip=MSP3420G-B8 +nicam +simple +simpler +radio mode=simpler
[4294695.011000] msp34xxg: daemon started
[4294695.068000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294695.070000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294695.072000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294695.075000] bttv0: registered device video0
[4294695.076000] bttv0: registered device vbi0
[4294695.326000] bt878: AUDIO driver version 0.0.0 loaded
[4294695.329000] bt878: Bt878 AUDIO function found (0).
[4294695.329000] ACPI: PCI Interrupt 0000:02:00.1[A] -> GSI 21 (level, low) -> IRQ 21
[4294695.329000] bt878(0): Bt878 (rev 17) at 02:00.1, irq: 21, latency: 32, memory: 0xf6aff000
[4294695.477000] ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
[4294695.477000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294695.531000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ff9ff000-ff9ff7ff] Max Packet=[2048]
[4294696.791000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001111000045a0dd][4294697.008000] Real Time Clock Driver v1.12
[4294697.172000] input: PC Speaker
[4294697.324000] Floppy drive(s): fd0 is 1.44M
[4294697.339000] FDC 0 is a post-1991 82077
[4294698.642000] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[4294700.439000] NET: Registered protocol family 10
[4294700.439000] Disabled Privacy Extensions on device c02eb280(lo)
[4294700.439000] IPv6 over IPv4 tunneling driver
[4294702.673000] ACPI: Power Button (FF) [PWRF]
[4294702.673000] ACPI: Sleep Button (CM) [SLPB]
[4294702.765000] ibm_acpi: ec object not found
[4294708.482000] [drm] Initialized drm 1.0.0 20040925
[4294708.485000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[4294708.487000] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon RV200 QW [Radeon 7500]
[4294708.487000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294708.487000] agpgart: reserved bits set in mode 0x1f004201. Fixed.
[4294708.487000] agpgart: Device is in legacy mode, falling back to 2.x
[4294708.487000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
[4294708.487000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[4294710.318000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294710.318000] apm: overridden by ACPI.
[4294710.621000] eth0: no IPv6 routers present
[4294715.636000] Bluetooth: Core ver 2.7
[4294715.636000] NET: Registered protocol family 31
[4294715.636000] Bluetooth: HCI device and connection manager initialized
[4294715.636000] Bluetooth: HCI socket layer initialized
[4294715.648000] Bluetooth: L2CAP ver 2.7
[4294715.648000] Bluetooth: L2CAP socket layer initialized
[4294715.677000] Bluetooth: RFCOMM ver 1.5
[4294715.677000] Bluetooth: RFCOMM socket layer initialized
[4294715.677000] Bluetooth: RFCOMM TTY layer initialized
[4295373.299000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295373.299000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295373.393000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295373.393000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295570.968000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295570.968000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295571.059000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295571.059000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295571.173000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295571.173000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295571.814000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295571.814000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295572.096000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295572.096000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295572.211000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295572.211000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295572.374000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0).
[4295572.374000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.
[4295572.491000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0).
[4295572.491000] atkbd.c: Use 'setkeycodes e02a <keycode>' to make it known.

modules.conf의 내용은 다음과 같습니다.

Quote:

alias char-major-81 videodev
alias char-major-81-0 bttv
options bttv card=43
options tuner type32=2 options msp3400 mixer=1
pre-install bttv modprobe -k tuner
(인터넷에서 보고 대충 배꼈습니다 ;;)

이 상태에서 xawtv로 플레이를 시도하면, 지직거리는 모습만이 화면에 나타날 뿐 그 외에는 아무것도 되지 않았습니다.

이 컴퓨터가 정체불명의 이유로 사운드가 나지 않기는 하나, 그건 그냥 메인보드 내장 사운드카드가 고장났다고 생각하고 넘기는 중이구요.

어떤식으로 해야 해결 가능할지 답변 부탁드립니다

댓글 달기

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.