현재 위치

홈 ›› Forums ›› 재미 ›› 자유 게시판

젠투 2004.2 설치 완료 후... 이것저것

warpdory의 이미지
글쓴이: warpdory / 작성시간: 월, 2004/08/23 - 9:06오후

집에 있는 부품 이것저것하고 케이스랑 하드 하나 사서 마루타 겸 파일 서버 하나 만들었습니다.

사양

CPU : P4-2G
램 : 512 MB
VGA : 밀레티엄 2 4메가
NIC : 8139 A 를 쓰는 4천원 주고 산 싸구려 NIC
사운드 카드 : 사운드 트랙 XG (야마하 744  칩셋 사용)

akpil@maruta akpil $ uname -a
Linux maruta.gippum.net 2.6.8-gentoo #1 SMP Sat Aug 21 23:44:52 KST 2004 i686 Intel(R) Pentium(R) 4 CPU 2.00GHz GenuineIntel GNU/Linux

akpil@maruta akpil $ df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/hda1              23G  3.9G   18G  18% /
/dev/hda2             126G   28G   99G  22% /home
/dev/hdb1             112G  108G  4.3G  97% /home/akpil/WORK
none                  252M     0  252M   0% /dev/shm
akpil@maruta akpil $

dmesg 입니다.

Linux version 2.6.8-gentoo (root@livecd) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Sat Aug 21 23:44:52 KST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
 BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
 BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131052
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126956 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f5270
ACPI: RSDT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec0c0
ACPI: BOOT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec030
ACPI: MADT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec058
ACPI: DSDT (v001   ASUS P4B533   0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Gentoo ro root=301
Initializing CPU#0
CPU 0 irqstacks, hard=c04d1000 soft=c04c9000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2019.923 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514056k/524208k available (2578k kernel code, 9408k reserved, 1091k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3997.69 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps:        3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
per-CPU timeslice cutoff: 1463.09 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (3997.69 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2019.0431 MHz.
..... host bus clock speed is 100.0971 MHz.
Brought up 1 CPUs
CPU0:  online
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1ea0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f90c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x90f0, dseg 0xf0000
pnp: 00:10: ioport range 0x290-0x297 has been reserved
pnp: 00:10: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:10: ioport range 0xe400-0xe47f has been reserved
pnp: 00:10: ioport range 0xec00-0xec3f has been reserved
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 00000000
.......     : arbitration: 00
.... register #03: 00000001
.......     : Boot DT    : 1
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B1
 11 001 01  1    1    0   1   0    1    1    D1
 12 001 01  1    1    0   1   0    1    1    C1
 13 001 01  1    1    0   1   0    1    1    B9
 14 001 01  1    1    0   1   0    1    1    E1
 15 001 01  1    1    0   1   0    1    1    D9
 16 001 01  0    1    0   1   0    1    1    A9
 17 001 01  1    1    0   1   0    1    1    C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1093257153.824:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
Using anticipatory io scheduler
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
hda: ST3160023A, ATA DISK drive
hdb: ST3120026A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: GCR-8523B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 1024KiB
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host0/bus0/target1/lun0: p1
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem e080d000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000d800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000d400
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000d000
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 180k freed
Adding 457844k swap on /dev/hda3.  Priority:-1 extents:1
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
eth0: RealTek RTL8139 at 0xb800, 00:c0:26:00:38:62, IRQ 22
eth0:  Identified 8139 chip type 'RTL-8139A'
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
ymfpci: YMF744 at 0xf5000000 IRQ 20
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hda2: warning: - it is slow mode for debugging.
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: journal-1153: found in header: first_unflushed_offset 5945, last_flushed_trans_id 2100
ReiserFS: hda2: journal-1206: Starting replay from offset 9023726294841, trans_id 0
ReiserFS: hda2: journal-1299: Setting newest_mount_id to 27
ReiserFS: hda2: Using r5 hash to sort names
ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
ReiserFS: hdb1: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hdb1: warning: - it is slow mode for debugging.
ReiserFS: hdb1: using ordered data mode
ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb1: checking transaction log (hdb1)
ReiserFS: hdb1: journal-1153: found in header: first_unflushed_offset 6436, last_flushed_trans_id 306364
ReiserFS: hdb1: journal-1206: Starting replay from offset 1315827655645476, trans_id 0
ReiserFS: hdb1: journal-1299: Setting newest_mount_id to 122
ReiserFS: hdb1: Using r5 hash to sort names
Real Time Clock Driver v1.12
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
File attachments: 
첨부파일 크기
Image icon 20040827-02.png229.3 KB
Image icon 20040827-01.png217.47 KB
Image icon 20040827-03.png401.25 KB
Image icon 20040904-01.png348.27 KB
Image icon 20040906-01.png215.65 KB
Image icon 20040908-02.png377.2 KB
Image icon 20040908-01.png413.95 KB
Forums: 
자유 게시판
yaroriri의 이미지

글쓴이: yaroriri / 작성시간: 월, 2004/08/23 - 9:53오후

오우...
VGA : 밀레티엄 2 4메가
쇼킹쇼킹!
저희집에도 하나 있다는 사실이 더 쇼킹!
아직도 사용하는 분이 계셨군요. ㅠ,ㅠ
지금까지도 2D 에선 최강이라 생각합니다만, 쓰고있지는 않습니다. 보관만... ^^

jiniri의 이미지

글쓴이: jiniri / 작성시간: 월, 2004/08/23 - 10:55오후

하드가 엄청나군요..
WORK는 멀 개발하시길래 저렇게 엄청난 용량을 ^^
부럽습니다 하드...

Necromancer의 이미지

글쓴이: Necromancer / 작성시간: 월, 2004/08/23 - 11:39오후

저는 제 작업 컴퓨터겸 서버에 160G 하드 두개달고 쓰는중,

==3 =3=3=3

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda1             24413968   9744856  14669112  40% /
/dev/sda3            131339440  79577936  51761504  61% /var
/dev/hda1            156212008    114512 156097496   1% /user
none                    256088         0    256088   0% /dev/shm


ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
hda: ST3160023A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ata_piix version 1.02
ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xEFF0 ctl 0xEFE6 bmdma 0xEF90 irq 18
ata2: SATA max UDMA/133 cmd 0xEFA8 ctl 0xEFE2 bmdma 0xEF98 irq 18
ata1: SATA port has no device.
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : ata_piix
  Vendor: ATA       Model: ST3160023AS       Rev: 3.18
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sda: drive cache: write back
 /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0

Written By the Black Knight of Destruction

gnobus의 이미지

글쓴이: gnobus / 작성시간: 화, 2004/08/24 - 12:38오전

마루타, 악필.. 이름들이 참 거시기 하네요. :)

저번에 뭐가 안돼서 때려치셨다고 하더니 다시 성공하신 거 축하드립니다.

저는 80G 두 개로 잘 버티고 있습니다. 정 공간이 부족해지면 부팅도 거의 안 하는 윈도 파티션을 날릴 생각입니다. 8)

maddie의 이미지

글쓴이: maddie / 작성시간: 화, 2004/08/24 - 12:51오전 

maddie@localhost ~ $ df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda3             8.1G  4.4G  3.4G  57% /
none                  189M     0  189M   0% /dev/shm
/dev/sda1              23M  2.8M   19M  13% /boot
maddie@localhost ~ $

정말 행복한 컴퓨팅 하시네용.
언제쯤 업글할꺼나. ㅋ

힘없는자의 슬픔

warpdory의 이미지

글쓴이: warpdory / 작성시간: 화, 2004/08/24 - 5:30오후

실치하고 이틀만에 emerge -u world

뭔가 하는 게 많군요. 흠..
컴파일 옵션을 좀 바꿨으니... 다시 다 하려나 ?


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

warpdory의 이미지

글쓴이: warpdory / 작성시간: 금, 2004/08/27 - 11:37오후

스크린 샷입니다.

처음으로 잡아 봅니다.

댓글 첨부 파일: 
첨부파일 크기
Image icon 0바이트
Image icon 0바이트
Image icon 0바이트


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

warpdory의 이미지

글쓴이: warpdory / 작성시간: 토, 2004/09/04 - 9:44오후

뭔가 꼬여서... vim 도 안 되고 해서. . emerge rsync 한 뒤에 emerge -ep world 하고 있습니다.

대충 설치된 패키지가 540 개.. 더군요. 어젯밤 11시부터 돌리시 시작해서 지금 대충 470 개째 패키지가 컴파일 중입니다.

실치된 것들이 이런 거더군요. 내일까진 끝나겠죠 ?

Convert-ASN1-0.18
Crypt-SSLeay-0.51
Crypt-SmbHash-0.02
DBD-mysql-2.9003
DBI-1.43
Digest-MD4-1.3
Digest-MD5-2.33
HTML-Parser-3.36
HTML-Tagset-3.03-r2
IO-Socket-SSL-0.96
Locale-gettext-1.01-r1
MIME-Base64-3.01
Net-Daemon-0.38
Net-SSLeay-1.23
PlRPC-0.2016-r1
SGMLSpm-1.03-r5
Storable-2.12
URI-1.31
XML-Parser-2.34
Xaw3d-1.5-r1
a2ps-4.13c-r1
acl-2.2.13-r1
acpid-1.0.2-r2
alsa-headers-1.0.6a
alsa-lib-1.0.6
ant-1.6.2-r2
antlr-2.7.4
apache-2.0.50
apmd-3.0.2-r3
arj-3.10g
arphicfonts-0.1-r2
artwiz-fonts-2.4-r1
aspell-0.50.5-r4
aspell-en-0.51.1
atk-1.6.1
attr-2.4.7-r1
audiofile-0.2.6-r1
autoconf-2.59-r4
automake-1.8.5-r1
avalon-logkit-bin-1.2.2
baekmuk-fonts-2.2
base64-1.3
baselayout-1.10.4
bash-3.0-r5
bc-1.06-r5
bcel-5.1
beecrypt-3.1.0-r2
beep-media-player-0.9.7_rc2-r1
bin86-0.16.13
binutils-2.15.90.0.1.1-r3
bison-1.875
bitchx-1.1-r1
bittornado-0.3.7
bittorrent-3.4.2-r1
bittorrent-stats-3.2.1b-r4
blackdown-jdk-1.4.2_rc1-r1
blackdown-jre-1.4.1
boehm-gc-6.3-r1
bonobo-1.0.22
bootsplash-0.6.1-r6
bsh-2.0_beta1
bug-buddy-2.6.1
build-docbook-catalog-1.2
bzip2-1.0.2-r3
cdrtools-2.01_alpha37
chkrootkit-0.43-r4
cjk-latex-4.5.2
clamav-0.75.1
commons-logging-1.0.4
commons-net-1.2.2
compface-1.4
control-center-1.4.0.5-r1
control-center-2.6.1
coreutils-5.2.1-r2
cpio-2.5
cpu-1.4.3
cracklib-2.7-r10
cronbase-0.3.1
ctags-5.5.4
cups-1.1.21_rc2
curl-7.12.0-r2
cvs-1.11.17
db-1.85-r2
db-3.2.9-r10
db-4.1.25_p1-r3
db-4.2.52_p2
dbh-1.0.19
debianutils-1.16.7-r4
desklet-battery-0.2
desklet-calendar-0.2.5.2
desklet-clock-0.32-r1
desklet-cornerxmms-0.0.5-r1
desklet-goodweather-0.4
desklet-ltvariations-0.26
desklet-multitail-0.3.1
desklet-psidisplays-20040420
desklet-psiextras-0.1
desklet-psisensors-20040420
desklet-rhythmlet-0.3g
desklet-rssgrab-0.6.2
desklet-starterbar-0.30
desklet-sysinfo-0.25
desklet-temperature-0.2
desklet-weather-0.25
desklet-wireless-0.2
devfsd-1.3.25-r8
dgs-0.5.10-r1
dhcpcd-1.3.22_p4-r5
dialog-0.9_beta20031207-r1
dietlibc-0.26-r1
diffutils-2.8.7
digest-base-1.05
docbook-dsssl-stylesheets-1.77-r2
docbook-sgml-dtd-3.0-r1
docbook-sgml-dtd-3.1-r1
docbook-sgml-dtd-4.0-r1
docbook-sgml-dtd-4.1-r1
docbook-sgml-utils-0.6.12-r2
docbook-xml-dtd-4.1.2-r5
docbook-xml-dtd-4.3
docbook-xml-simple-dtd-1.0
docbook-xml-simple-dtd-4.1.2.4
docbook-xsl-stylesheets-1.65.1
dosbox-0.61
e2fsprogs-1.35
ed-0.2-r3
ee-0.3.12-r2
eel-2.6.2
eject-2.0.13
elfutils-0.94-r1
emacs-21.3-r4
enchant-1.1.3
eog-2.6.1
epiphany-1.2.7-r1
epm-0.8.8
esound-0.2.35
eterm-0.9.2-r5
expat-1.95.7
f2c-20030320
faad2-2.0-r3
fam-2.7.0-r1
fbset-2.1
fetch-1.0
fftw-2.1.5-r1
file-4.10
file-roller-2.6.1
findutils-4.1.20-r1
flex-2.5.4a-r5
fontconfig-2.2.3
foomatic-db-engine-3.0.1
foomatic-filters-3.0.1
fox-1.2.6-r1
fpconst-0.6.0
freetype-1.3.1-r4
freetype-2.1.5-r1
g-wrap-1.3.4-r1
gail-1.6.6
gaim-0.82.1
gaim-encryption-2.30
gal-0.24
gawk-3.1.3-r1
gcalctool-4.3.51
gcc-3.3.4-r1
gcc-config-1.3.6-r1
gconf-1.0.9
gconf-2.6.2
gconf-editor-2.6.2
gd-2.0.28
gdb-6.0
gdbm-1.8.3-r1
gdesklets-core-0.26.2
gdk-pixbuf-0.22.0-r2
gdm-2.6.0.4
gedit-2.6.2
genkernel-3.0.2f
gentoo-dev-sources-2.6.8
gentoo-dev-sources-2.6.8-r1
gentoo-dev-sources-2.6.8-r3
gentoolkit-0.2.0_pre8
gettext-0.12.1-r1
gftp-2.0.17
ggv-2.6.1
ghostscript-7.07.1-r5
giflib-4.1.0-r3
gimp-2.0.4
gimp-freetype-0.5
gimp-print-4.2.7
gkrellm-2.2.2
gle-3.0.1-r2
glib-1.2.10-r5
glib-2.4.6
glibc-2.3.4.20040808
glibmm-2.4.4
glut-3.7.1
gmp-4.1.3
gnome-2.6.2-r1
gnome-applets-2.6.2
gnome-common-2.4.0
gnome-cups-manager-0.23
gnome-desktop-2.6.2
gnome-games-2.6.2
gnome-icon-theme-1.2.3
gnome-keyring-0.2.1
gnome-libs-1.4.2
gnome-media-2.6.2
gnome-mime-data-2.4.1
gnome-netstatus-2.6.2
gnome-panel-2.6.2
gnome-print-0.37
gnome-python-2.0.2
gnome-session-2.6.2
gnome-system-monitor-2.6.0
gnome-terminal-2.6.1
gnome-themes-2.6.2
gnome-themes-extras-0.7
gnome-utils-2.6.2-r1
gnome-vfs-1.0.5-r3
gnome-vfs-2.6.1.1
gnome-vfs-extras-0.99.11
gnome2-user-docs-2.6.0.1
gnucash-1.8.9
gnuconfig-20040214
gnumeric-1.2.13
gnupg-1.2.6
gpdf-0.132
gperf-3.0.1
gpgme-0.3.14-r1
gpgme-0.3.16
gpm-1.20.1
grep-2.5.1-r6
groff-1.19
gst-plugins-0.8.3
gst-plugins-alsa-0.8.3
gst-plugins-esd-0.8.3
gst-plugins-gnomevfs-0.8.3
gst-plugins-mad-0.8.3
gst-plugins-ogg-0.8.3
gst-plugins-oss-0.8.3
gst-plugins-vorbis-0.8.3
gstreamer-0.8.5
gtk+-1.2.10-r11
gtk+-2.4.9
gtk-engines-2.2.0
gtk-engines-mac2-1.0.3-r1
gtk-engines-smooth-0.5.8
gtk-engines-xfce-2.1.9
gtk-gnutella-0.94
gtk-theme-switch-2.0.0_rc2-r1
gtkglarea-1.2.3-r1
gtkglarea-1.99.0
gtkhtml-1.1.10-r1
gtksourceview-1.0.1
gtkspell-2.0.4-r1
gucharmap-1.4.1
guile-1.6.4-r1
guppi-0.40.3-r2
gvim-6.3
gxmms-0.1.1
gzip-1.3.5-r1
hanterm-xf-2.0.5
hashalot-0.3
hdparm-5.6
help2man-1.33.1
hermes-1.3.2-r2
hicolor-icon-theme-0.5
host-991529
http-fetcher-1.0.3
ical-2.2.1
iceicons-0.10.0
icewm-1.2.16-r1
id3lib-3.8.3-r2
imagemagick-6.0.5.2
imaging-1.1.4
imlib-1.9.14-r1
imlib2-1.1.2
indent-2.2.9
intltool-0.30
iozone-3.221
iptables-1.2.11-r2
iputils-021109-r3
jadetex-3.12
java-config-1.2.10
javacc-3.2-r2
jdepend-2.7
jpeg-6b-r3
jython-bin-2.1-r4
kbd-1.12-r2
kochi-substitute-20030809-r3
kudzu-1.1.43
lame-3.96.1
lcms-1.12
less-382-r2
lftp-3.0.7-r1
lib-compat-1.3
libIDL-0.8.3
libaal-1.0.1
libao-0.8.5
libart_lgpl-2.3.16
libast-0.5-r2
libbonobo-2.6.2
libbonoboui-2.6.1
libcroco-0.5.1
libdv-0.102
libexif-0.5.12-r1
libf2c-20021004-r1
libghttp-1.0.9-r4
libglade-0.17-r6
libglade-2.4.0
libgnome-2.6.1.2
libgnomecanvas-2.6.1.1
libgnomecups-0.1.10
libgnomeprint-2.6.2
libgnomeprintui-2.6.2
libgnomeui-2.6.1.1
libgsf-1.10.0
libgtkhtml-2.6.2
libgtop-2.6.0
libid3tag-0.15.1b
libmad-0.15.1b
libmikmod-3.1.11-r1
libmng-1.0.8
libnet-1.19
libogg-1.1
libol-0.3.14
libpcap-0.8.3-r1
libpcre-4.5
libperl-5.8.5
libpng-1.2.5-r8
librsvg-2.6.5
libsdl-1.2.7-r2
libsigc++-2.0.1
libtool-1.5.2-r5
libungif-4.1.0.1b
libunicode-0.4-r1
libvorbis-1.0.1-r2
libwnck-2.6.2.1
libwww-5.4.0-r2
libwww-perl-5.800
libxfce4mcs-4.0.6
libxfce4util-4.0.6
libxfcegui4-4.0.6
libxklavier-1.02
libxml-1.8.17-r2
libxml2-2.6.12
libxslt-1.1.9
libzvt-2.0.1-r2
lilo-22.5.9-r2
linc-1.0.3
linux26-headers-2.6.8.1
log4j-1.2.8
lynx-2.8.5
m4-1.4.1
madplay-0.15.2b
mailbase-0.00-r6
make-3.80
man-1.5m-r1
man-pages-1.67
mc-4.6.0-r10
metacity-2.8.1
metacity-themes-1.0
mime-types-1.0-r1
miscfiles-1.3-r1
mixxx-1.2.1
mlterm-2.8.1_pre20040815
module-init-tools-3.0-r2
mozilla-1.7.2-r1
mozilla-firefox-0.9.3-r1
mozilla-launcher-1.16
mpeg2vidcodec-12-r1
mpg123-0.59s-r3
mpg321-0.2.10-r1
mplayer-1.0_pre5-r3
mplayer-skins-0.2-r4
mplayerplug-in-2.66
mrtg-2.10.15
mysql-4.0.20-r1
nabi-0.14
nano-1.3.4
nasm-0.98.38
nautilus-2.6.3-r1
ncompress-4.2.4
ncurses-5.4-r5
net-tools-1.60-r9
netpbm-10.20
netscape-flash-7.0.25
netscape-navigator-4.80
newt-0.50.35-r3
nmap-3.70
nspr-4.4.1
nss-3.9.2
numlockx-1.0
oaf-0.6.10
opengl-update-1.8.1-r1
openjade-1.3.2-r1
openldap-2.1.30-r3
openmotif-2.1.30-r5
openoffice-ximian-1.3.2
opensp-1.5.1
openssh-3.9_p1
openssl-0.9.7d-r1
orbit-0.5.17
orbit-2.10.4
oro-2.0.8
pam-0.77-r1
pam-login-3.14
pango-1.4.1-r1
patch-2.5.9
patchutils-0.2.30
pciutils-2.1.11-r2
perl-5.8.5
perl-ldap-0.3202
pkgconfig-0.15.0
pmake-1.45-r4
popt-1.7-r1
portage-2.0.50-r10
portmap-5b-r8
procps-3.2.3
proftpd-1.2.10_rc3-r1
psmisc-21.4
psutils-1.17
pwdb-0.62
pygtk-2.2.0
pyopengl-2.0.0.44
pyorbit-2.0.0
python-2.3.4
python-fchksum-1.7.1
pyxdg-0.6
pyxml-0.8.3-r1
pyxmms-2.02
qt-3.3.3
rar-3.3.0
rdate-990821-r1
readline-5.0
regexp-bin-1.3
reiser4progs-1.0.1
rhino-1.5_rc5
rhythmbox-0.8.5
rpm-4.2.1
rpm2targz-9.0-r2
rsync-2.6.0-r3
samba-3.0.6-r3
sash-3.7
scrollkeeper-0.3.14
sdl-net-1.2.5
sed-4.0.9
setserial-2.17-r2
sgml-common-0.6.3-r4
shadow-4.0.4.1-r3
shared-mime-info-0.14
sharutils-4.2.1-r9
slang-1.4.9-r1
slib-2.4.6
slocate-2.7-r5
sniffit-0.3.7-r1
soappy-0.11.3
splat-0.08
ssmtp-2.60.9
startup-notification-0.7
sudo-1.6.7_p5
svgalib-1.9.19
swig-1.3.21
sylpheed-0.9.12-r3
sylpheed-iconset-20040525
syslog-ng-1.6.5
sysvinit-2.85-r1
tar-1.14
tcl-8.4.6
tcp-wrappers-7.6-r8
tcpdump-3.8.3-r1
tcsh-6.12-r3
telnet-bsd-1.0
tetex-2.0.2-r3
texinfo-4.7-r1
tiff-3.6.1-r1
tk-8.4.6-r1
traceroute-1.4_p12-r2
tripwire-2.3.1.2-r1
ttf-bitstream-vera-1.10-r3
ttmkfdir-3.0.9-r1
ucl-1.03
unfonts-0.0.20040526
unrar-3.4.2
unzip-5.50-r2
upx-1.25
utempter-0.5.5.5
util-linux-2.12-r4
vim-6.3
vim-core-6.3-r1
vixie-cron-3.0.1-r5
vmware-workstation-4.5.2.8848-r1
vorbis-tools-1.0.1
vte-0.11.11
w3m-0.5.1-r1
wget-1.9.1-r2
which-2.16
win32codecs-20040703
windowmaker-0.80.2-r4
wine-20040716
wireless-tools-27_pre23
wm-icons-0.4.0_pre1-r1
wxGTK-2.4.2-r3
wxpython-2.4.2.4
xalan-2.6.0
xchat-2.4.0
xemacs-gtk-21.4.8-r3
xerces-2.6.2-r1
xfcalendar-0.1.9
xfce-3.8.18-r2
xfce-mcs-manager-4.0.6
xfce-mcs-plugins-4.0.6
xfce-utils-4.0.6
xfce4-4.0.6
xfce4-base-4.0.6
xfce4-battery-0.2.0
xfce4-iconbox-4.0.6
xfce4-minicmd-0.2.0
xfce4-mixer-4.0.6
xfce4-netload-0.2.2
xfce4-panel-4.0.6
xfce4-showdesktop-0.3.0
xfce4-systemload-0.3.4
xfce4-systray-4.0.6
xfce4-themes-4.0.6
xfce4-toys-4.0.6
xfce4-trigger-launcher-4.0.6
xfdesktop-4.0.6
xfe-0.70
xffm-4.0.6
xffm-icons-4.0.6
xfprint-4.0.6
xfwm4-4.0.6
xfwm4-themes-4.0.6
xinetd-2.3.13
xloadimage-4.1-r1
xmms-1.2.10-r5
xmp-2.0.5_pre3-r1
xorg-x11-6.7.0-r2
xosview-1.8.1
xprobe-0.0.2
xscreensaver-4.16
xterm-196
xtraceroute-0.9.1
xv-3.10a-r6
yacc-1.9.1-r2
yelp-2.6.1
zenity-2.6.2
zip-2.3-r2
zlib-1.2.1-r3


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

eou4의 이미지

글쓴이: eou4 / 작성시간: 토, 2004/09/04 - 9:51오후

하드가 많으면 열은 어떻게 하시는지..

저도 집에서 서버를 하나 두고있는데요.

올해 여름은 잘 버텨주네요..

도중에 드르르륵 하는 현상은 있었어요 :cry:

쿨링이 잘돼는 케이스는 비싸서 엄두를 못내겠더군요..

ㅎㅁㅎ

warpdory의 이미지

글쓴이: warpdory / 작성시간: 토, 2004/09/04 - 9:56오후

하드는 그냥 팬 달아놓은 걸로 해결합니다.

케이스에 하드 달 수 있는 베이가 꽤 되는데, 요새 케이스들 보면 케이스 앞면 아래쪽에 팬을 달 수 있죠. 그쪽까지 하드를 달 수 있게 되어 있기 때문에 그쪽에 하드를 달고 씁니다. 그려면 자연히 공냉이 가능해지죠. 열 문제는 그래서 별로 걱정 안합니다. 가끔 뜯어서 진공청소기로 먼지만 빨아주면 됩니다.


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

warpdory의 이미지

글쓴이: warpdory / 작성시간: 토, 2004/09/04 - 11:24오후

하는 김에 커널도 새로 바꿨습니다.... 아흠..

Linux version 2.6.8-gentoo-r3 (root@maruta.gippum.net) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Wed Sep 1 23:01:44 KST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
 BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
 BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
 BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131052
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126956 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f5270
ACPI: RSDT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec000
ACPI: FADT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec0c0
ACPI: BOOT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec030
ACPI: MADT (v001 ASUS   P4B533   0x42302e31 MSFT 0x31313031) @ 0x1ffec058
ACPI: DSDT (v001   ASUS P4B533   0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Gentoo-2.6.8-r3 ro root=301
Initializing CPU#0
CPU 0 irqstacks, hard=c0467000 soft=c045f000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2019.899 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514488k/524208k available (2272k kernel code, 8976k reserved, 980k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3997.69 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  3febfbff 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps:        3febfbff 00000000 00000000 00000080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
per-CPU timeslice cutoff: 1463.09 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (3997.69 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2019.0592 MHz.
..... host bus clock speed is 100.0979 MHz.
Brought up 1 CPUs
CPU0:  online
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1ea0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f90c0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x90f0, dseg 0xf0000
pnp: 00:10: ioport range 0x290-0x297 has been reserved
pnp: 00:10: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:10: ioport range 0xe400-0xe47f has been reserved
pnp: 00:10: ioport range 0xec00-0xec3f has been reserved
PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 00000000
.......     : arbitration: 00
.... register #03: 00000001
.......     : Boot DT    : 1
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B1
 11 001 01  1    1    0   1   0    1    1    D1
 12 001 01  1    1    0   1   0    1    1    C1
 13 001 01  1    1    0   1   0    1    1    B9
 14 001 01  1    1    0   1   0    1    1    E1
 15 001 01  1    1    0   1   0    1    1    D9
 16 001 01  0    1    0   1   0    1    1    A9
 17 001 01  1    1    0   1   0    1    1    C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1094307594.4294967274:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: devfs_debug: 0x0
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
hda: ST3160023A, ATA DISK drive
hdb: ST3120026A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: GCR-8523B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 1024KiB
hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host0/bus0/target1/lun0: p1
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem e0823000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0000d800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000d400
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000d000
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 172k freed
Adding 457844k swap on /dev/hda3.  Priority:-1 extents:1
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
eth0: RealTek RTL8139 at 0xb800, 00:c0:26:00:38:62, IRQ 22
eth0:  Identified 8139 chip type 'RTL-8139A'
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
ymfpci: YMF744 at 0xf5000000 IRQ 20
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hda2: warning: - it is slow mode for debugging.
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: journal-1153: found in header: first_unflushed_offset 782, last_flushed_trans_id 6309
ReiserFS: hda2: journal-1206: Starting replay from offset 27101243638542, trans_id 0
ReiserFS: hda2: journal-1299: Setting newest_mount_id to 64
ReiserFS: hda2: Using r5 hash to sort names
ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
ReiserFS: hdb1: warning: CONFIG_REISERFS_CHECK is set ON
ReiserFS: hdb1: warning: - it is slow mode for debugging.
ReiserFS: hdb1: using ordered data mode
ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb1: checking transaction log (hdb1)
ReiserFS: hdb1: journal-1153: found in header: first_unflushed_offset 3827, last_flushed_trans_id 306646
ReiserFS: hdb1: journal-1206: Starting replay from offset 1317038836420339, trans_id 0
ReiserFS: hdb1: journal-1299: Setting newest_mount_id to 159
ReiserFS: hdb1: Using r5 hash to sort names
Real Time Clock Driver v1.12
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

warpdory의 이미지

글쓴이: warpdory / 작성시간: 토, 2004/09/04 - 11:31오후

emerge -ep world 후의 스크린 샷.. 입니다.

댓글 첨부 파일: 
첨부파일 크기
Image icon 0바이트


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

warpdory의 이미지

글쓴이: warpdory / 작성시간: 월, 2004/09/06 - 8:33오후

마루타 머신을 좀 바꿨습니다.

P4-2G -> AMD athlon-xp 2500+ ...
덕분에 삽질 중입니다.

완전히 ... 삽질 중 --- 온통 컴파일 중입니다. 흠냐 흠냐.

Linux version 2.6.8-gentoo-r3 (root@livecd) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 SMP Sun Sep 5 23:58:11 Local time zone must be set--see zic m
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia                                    ) @ 0x000f6b80
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff79c0
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Gentoo ro root=301
Initializing CPU#0
CPU 0 irqstacks, hard=c04bb000 soft=c04b3000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1830.112 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514196k/524224k available (2515k kernel code, 9268k reserved, 1050k data, 196k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3620.86 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) XP 2500+ stepping 00
per-CPU timeslice cutoff: 1462.76 usecs.
task migration cache decay timeout: 2 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Total of 1 processors activated (3620.86 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1829.0692 MHz.
..... host bus clock speed is 332.0671 MHz.
Brought up 1 CPUs
CPU0:  online
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf00
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf30, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 23
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 22 (level, high) -> IRQ 22
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 18 (level, high) -> IRQ 18
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  1    0    0   0   0    0    0    00
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  1    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    1    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 001 01  1    1    0   0   0    1    1    C9
 13 001 01  1    1    0   0   0    1    1    D1
 14 001 01  1    1    0   0   0    1    1    C1
 15 001 01  1    1    0   0   0    1    1    B9
 16 001 01  1    1    0   0   0    1    1    B1
 17 001 01  1    1    0   0   0    1    1    A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1094497588.540:0): initialized
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
udf: registering filesystem
ACPI: Power Button (FF) [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (34 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized mga 3.1.0 20021029 on minor 0: Matrox Graphics, Inc. MGA G400 AGP
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
acpi_floppy_resource: 6 ioports at 0x3f0
acpi_floppy_resource: 1 ioports at 0x3f7
floppy: controller ACPI FDC0 at I/O 0x3f0-0x3f5, 0x3f7-0x3f7 irq 6 dma channel 2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340014A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IRQ probe failed (0xffffad7c)
hdc: IRQ probe failed (0xffffad7c)
hdc: no response (status = 0x0a), resetting drive
hdc: IRQ probe failed (0xffffad7c)
hdc: no response (status = 0x0a)
hdd: GCR-8521B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 20, pci mem e0846000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
ALSA device list:
  No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 196k freed
Adding 522104k swap on /dev/hda3.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 18 (level, high) -> IRQ 18
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc000. Vers LK1.1.19
Intel 810 + AC97 Audio, version 1.01, 23:53:07 Sep  5 2004
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:06.0 to 64
i810: NVIDIA nForce Audio found at IO 0xd800 and 0xd400, MEM 0x0000 and 0x0000, IRQ 22
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
i810_audio: setting clocking to 48648
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 1x mode
댓글 첨부 파일: 
첨부파일 크기
Image icon 0바이트


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

warpdory의 이미지

글쓴이: warpdory / 작성시간: 수, 2004/09/08 - 6:27오후

오픈 오피스 1.3.3-r1 + tetex + 기타 몇가지를 동시에 emerge 하고 있습니다.

흠냐... 망할 인텔 ... 왜 타버렸는지 .. - 오늘 온다던 DHL 은 내일 오후에나 온다는군요. 젠장.

댓글 첨부 파일: 
첨부파일 크기
Image icon 0바이트
Image icon 0바이트


---------
귓가에 햇살을 받으며 석양까지 행복한 여행을...
웃으며 떠나갔던 것처럼 미소를 띠고 돌아와 마침내 평안하기를...
- 엘프의 인사, 드래곤 라자, 이영도

즐겁게 놀아보자.

neogeo의 이미지

글쓴이: neogeo / 작성시간: 수, 2004/09/08 - 6:41오후

ganadist 님이 저에게 알려주신 vino 가 워낙 멋져서요

gnome 2.7.9X 버젼 만세

Neogeo - Future is Now.

무한포옹의 이미지

글쓴이: 무한포옹 / 작성시간: 수, 2004/09/08 - 6:44오후

역시 깔끔하네요~

오리지널 아쿠아 테마는 아닌 거 같고 (잘 모름당~) 애플걸도 이쁘고

bottom 그놈 패널의 맨 왼쪽 아이콘이 사이즈가 모자라 좀 잘린게 안쓰럽네요~

이것도 완성형은 아니겠지요? gnome 2.7의 세계로 빨리 오세요..

좀 있으면 2.8도 나온다는데오~

-------------------------------
== warning 대부분 틀린 얘기입니다 warning ===

둘러보기