데비안 3.0 r2 깔고 한글 설정...

데비안을 깔고, Konquerer 에서 한글이 안 나오길래, dselect로 백묵폰트를 깔았습니다.

그리고 .xsession 파일을 만들어
export LANG=ko_KR.eucKR
한 줄을 넣어줬습니다.

그랬더니, startx 를 하면,

warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.20-8um i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jul 18 19:09:34 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "NVIDIA GeForce"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,
/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,
/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) NVidia GeForce2 MX DDR rev 178, Mem @ 0xec000000/24, 0xe0000000/27
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.1
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2,
	RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta),
	RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR,
	Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra,
	Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR,
	GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2),
	GeForce3 (rev 3)
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce2 MX DDR found
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce2 MX DDR"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xE0000000
(--) NV(0): MMIO registers at 0xEC000000
(--) NV(0): VideoRAM: 32768 kBytes
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.2.0
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): I2C device "DDC:ddc2" registered.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): I2C device "DDC:ddc2" registered.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0): DDC Monitor info: 0x82b42d0
(II) NV(0): Manufacturer: ELM  Model: 1700  Serial#: 31
(II) NV(0): Year: 2003  Week: 10
(II) NV(0): EDID Version: 1.2
(II) NV(0): Analog Display Input,  Input Voltage Level: 0.714/0.286 V
(II) NV(0): Sync:  Separate
(II) NV(0): Max H-Image Size [cm]: horiz.: 31  vert.: 23
(II) NV(0): Gamma: 2.07
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): redX: 0.625 redY: 0.340   greenX: 0.280 greenY: 0.595
(II) NV(0): blueX: 0.150 blueY: 0.063   whiteX: 0.283 whiteY: 0.298
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) NV(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) NV(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) NV(0): #3: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz   Image Size:  330 x 320 mm
(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 65.0 MHz   Image Size:  330 x 320 mm
(II) NV(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) NV(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 40.0 MHz   Image Size:  330 x 320 mm
(II) NV(0): h_active: 800  h_sync: 840  h_sync_end 968 h_blank_end 1056 h_border: 0
(II) NV(0): v_active: 600  v_sync: 601  v_sync_end 605 v_blanking: 628 v_border: 0
(II) NV(0): Ranges: V min: 56  V max: 75 Hz, H min: 30  H max: 85 kHz, PixClock max 130 MHz
(II) NV(0): end of DDC Monitor info

(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): My Monitor: Using hsync range of 31.50-64.30 kHz
(II) NV(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "1400x1050" (hsync out of range)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(++) NV(0): DPI set to (100, 100)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
(--) Depth 24 pixmap format is 32 bpp
(==) NV(0): Write-combining range (0xe0000000,0x2000000)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Mouse1: Protocol: "PS/2"
(**) Mouse1: Core Pointer
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!

와 같은 에러메시지가 뜨면서 X 가 실행되지 않습니다.

그런데, .xsession 파일에서 export LANG=ko_KR.eucKR 을 빼주면 실행이 잘 되구요. (물론 한글이 안 보이니 소용 없지만요)

데비안에 입문하려고 하는데, 한글 설정이 어렵네요.

어디가 잘못 된 것인가요?

그리고, Debian Woody 3.0 r2 를 기준으로 한글 사용을 위한 지침 문서 같은 것 없을 까요?

KDE 데스크탑 환경입니다.