CentOS 5.5 64 사용중인데 서버가 재부팅이 되었습니다.

sylphiel의 이미지

안녕하세요.

CenOS 5.5 64 사용중인데 서버가 재부팅이 되었습니다.

WAS 서버이고, 이벤트 때문에 단기적으로 쓰려고 하는데 불안하네요.

VM이 올라가있고, VM올리는데 서버가 재부팅이 되어있습니다.

messages로그에는 아래 내용뿐이 없어요.

이벤트 중에 서버가 죽어버리면 안되는데, 원인도 모르겠고, 검색해도 알수가 없네요... ㅠㅠ

Apr 22 10:02:50 blade02 kernel: Removing netfilter NETLINK layer.
Apr 22 19:42:20 blade02 gconfd (root-11518): 시작 (버전 2.12.0), pid 5967 사용자 'root'
Apr 22 19:42:20 blade02 gconfd (root-11518): 주소 "xml:readonly:/etc/gconf/gconf.xml.mandatory"을(를) 위치 0에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 22 19:42:20 blade02 gconfd (root-11518): 주소 "xml:readwrite:/home/yjlee/.gconf"을(를) 위치 1에 있는 쓰기 가능한 설정 소스로 확인했습니다
Apr 22 19:42:20 blade02 gconfd (root-11518): 주소 "xml:readonly:/etc/gconf/gconf.xml.defaults"을(를) 위치 2에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 22 19:42:35 blade02 kernel: tap tap-1-51712: 2 getting info
Apr 22 19:42:36 blade02 kernel: device vif1.0 entered promiscuous mode
Apr 22 19:42:36 blade02 kernel: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
Apr 22 19:42:40 blade02 kernel: blktap: ring-ref 8, event-channel 14, protocol 2 (x86_32-abi)
Apr 22 19:42:44 blade02 kernel: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
Apr 22 19:42:44 blade02 kernel: eth1: topology change detected, propagating
Apr 22 19:42:44 blade02 kernel: eth1: port 2(vif1.0) entering forwarding state
Apr 22 19:42:46 blade02 avahi-daemon[5611]: New relevant interface vif1.0.IPv6 for mDNS.
Apr 22 19:42:46 blade02 avahi-daemon[5611]: Joining mDNS multicast group on interface vif1.0.IPv6 with address fe80::fcff:ffff:feff:
ffff.
Apr 22 19:42:46 blade02 avahi-daemon[5611]: Registering new address record for fe80::fcff:ffff:feff:ffff on vif1.0.
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.730: error : xenInotifyXendDomainsDirLookup:158 : internal error finding dom on config li
st
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.730: error : xenInotifyXendDomainsDirAddEntry:243 : internal error Error looking up domai
n
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.748: error : xenInotifyEvent:350 : internal error Error adding file to config cache
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.752: error : xenInotifyXendDomainsDirLookup:158 : internal error finding dom on config li
st
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.752: error : xenInotifyXendDomainsDirAddEntry:243 : internal error Error looking up domai
n
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.752: error : xenInotifyEvent:350 : internal error Error adding file to config cache
Apr 22 20:45:42 blade02 kernel: tap tap-2-51712: 2 getting info
Apr 22 20:45:43 blade02 kernel: device vif2.0 entered promiscuous mode
Apr 22 20:45:43 blade02 kernel: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
Apr 22 20:45:47 blade02 kernel: blktap: ring-ref 8, event-channel 14, protocol 2 (x86_32-abi)
Apr 22 20:45:51 blade02 kernel: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
Apr 22 20:45:51 blade02 kernel: eth1: topology change detected, propagating
Apr 22 20:45:51 blade02 kernel: eth1: port 3(vif2.0) entering forwarding state
Apr 22 20:45:52 blade02 avahi-daemon[5611]: New relevant interface vif2.0.IPv6 for mDNS.
Apr 22 20:45:52 blade02 avahi-daemon[5611]: Joining mDNS multicast group on interface vif2.0.IPv6 with address fe80::fcff:ffff:feff:
ffff.
Apr 22 20:45:52 blade02 avahi-daemon[5611]: Registering new address record for fe80::fcff:ffff:feff:ffff on vif2.0.
Apr 22 23:03:21 blade02 gconfd (root-11518): GConf ?
Apr 22 23:03:21 blade02 gconfd (root-11518):
Apr 23 04:36:49 blade02 gconfd (root-20856): 시작 (버전 2.12.0), pid 2086 사용자 'root'
Apr 23 04:36:49 blade02 gconfd (root-20856): 주소 "xml:readonly:/etc/gconf/gconf.xml.mandatory"을(를) 위치 0에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 23 04:36:49 blade02 gconfd (root-20856): 주소 "xml:readwrite:/home/yjlee/.gconf"을(를) 위치 1에 있는 쓰기 가능한 설정 소스로 확인했습니다
Apr 23 04:36:49 blade02 gconfd (root-20856): 주소 "xml:readonly:/etc/gconf/gconf.xml.defaults"을(를) 위치 2에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 23 04:41:53 blade02 syslogd 1.4.1: restart.
Apr 23 04:41:53 blade02 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 23 04:41:53 blade02 kernel: Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
Apr 23 04:41:53 blade02 kernel: Linux version 2.6.18-194.32.1.el5xen (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (R
ed Hat 4.1.2-48)) #1 SMP Wed Jan 5 18:44:24 EST 2011
Apr 23 04:41:53 blade02 kernel: BIOS-provided physical RAM map:
Apr 23 04:41:53 blade02 kernel: Xen: 0000000000000000 - 000000085fd46000 (usable)
Apr 23 04:41:53 blade02 kernel: DMI 2.7 present.
Apr 23 04:41:53 blade02 kernel: >>> ERROR: Invalid checksum
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x04] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x32] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x02] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x16] lapic_id[0x26] disabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] disabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x36] disabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x06] disabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x11] lapic_id[0x21] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x19] lapic_id[0x31] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x09] lapic_id[0x01] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x15] lapic_id[0x25] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x35] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x13] lapic_id[0x23] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x33] enabled)
Apr 23 04:41:54 blade02 rpc.statd[5129]: Version 1.0.9 Starting
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x03] enabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x17] lapic_id[0x27] disabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] disabled)
Apr 23 04:41:54 blade02 rpc.statd[5129]: statd running as root. chown /var/lib/nfs/statd/sm to choose different user
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x37] disabled)
Apr 23 04:41:54 blade02 kernel: ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x07] disabled)
Apr 23 04:41:55 blade02 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
Apr 23 04:41:55 blade02 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
Apr 23 04:41:55 blade02 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
Apr 23 04:41:55 blade02 kernel: ACPI: IOAPIC (id[0x00] address[0xfec80000] gsi_base[24])
Apr 23 04:41:55 blade02 kernel: IOAPIC[1]: apic_id 0, version 32, address 0xfec80000, GSI 24-47

...back 1 page
Apr 22 02:29:54 blade02 kernel: input: HP Virtual Keyboard as /class/input/input3
Apr 22 02:29:54 blade02 kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:01:00.4-1
Apr 22 02:29:54 blade02 kernel: input: HP Virtual Keyboard as /class/input/input4
Apr 22 02:29:54 blade02 kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:01:00.4-1
Apr 22 02:32:01 blade02 kernel: usb 6-1: USB disconnect, address 3
Apr 22 02:32:01 blade02 kernel: usb 6-1: new full speed USB device using uhci_hcd and address 4
Apr 22 02:32:02 blade02 kernel: usb 6-1: configuration #1 chosen from 1 choice
Apr 22 02:32:02 blade02 kernel: input: HP Virtual Keyboard as /class/input/input5
Apr 22 02:32:02 blade02 kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:01:00.4-1
Apr 22 02:32:02 blade02 kernel: input: HP Virtual Keyboard as /class/input/input6
Apr 22 02:32:02 blade02 kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:01:00.4-1
Apr 22 02:42:45 blade02 kernel: usb 6-1: USB disconnect, address 4
Apr 22 02:42:45 blade02 kernel: usb 6-1: new full speed USB device using uhci_hcd and address 5
Apr 22 02:42:45 blade02 kernel: usb 6-1: configuration #1 chosen from 1 choice
Apr 22 02:42:45 blade02 kernel: input: HP Virtual Keyboard as /class/input/input7
Apr 22 02:42:45 blade02 kernel: input: USB HID v1.01 Keyboard [HP Virtual Keyboard ] on usb-0000:01:00.4-1
Apr 22 02:42:45 blade02 kernel: input: HP Virtual Keyboard as /class/input/input8
Apr 22 02:42:45 blade02 kernel: input: USB HID v1.01 Mouse [HP Virtual Keyboard ] on usb-0000:01:00.4-1
Apr 22 10:02:50 blade02 kernel: Removing netfilter NETLINK layer.
Apr 22 19:42:20 blade02 gconfd (root-11518): 시작 (버전 2.12.0), pid 11518 사용자 'root'
Apr 22 19:42:20 blade02 gconfd (root-11518): 주소 "xml:readonly:/etc/gconf/gconf.xml.mandatory"을(를) 위치 0에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 22 19:42:20 blade02 gconfd (root-11518): 주소 "xml:readwrite:/home/yjlee/.gconf"을(를) 위치 1에 있는 쓰기 가능한 설정 소스로 확인했습니다
Apr 22 19:42:20 blade02 gconfd (root-11518): 주소 "xml:readonly:/etc/gconf/gconf.xml.defaults"을(를) 위치 2에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 22 19:42:35 blade02 kernel: tap tap-1-51712: 2 getting info
Apr 22 19:42:36 blade02 kernel: device vif1.0 entered promiscuous mode
Apr 22 19:42:36 blade02 kernel: ADDRCONF(NETDEV_UP): vif1.0: link is not ready
Apr 22 19:42:40 blade02 kernel: blktap: ring-ref 8, event-channel 14, protocol 2 (x86_32-abi)
Apr 22 19:42:44 blade02 kernel: ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
Apr 22 19:42:44 blade02 kernel: eth1: topology change detected, propagating
Apr 22 19:42:44 blade02 kernel: eth1: port 2(vif1.0) entering forwarding state
Apr 22 19:42:46 blade02 avahi-daemon[5611]: New relevant interface vif1.0.IPv6 for mDNS.
Apr 22 19:42:46 blade02 avahi-daemon[5611]: Joining mDNS multicast group on interface vif1.0.IPv6 with address fe80::fcff:ffff:feff:
ffff.
Apr 22 19:42:46 blade02 avahi-daemon[5611]: Registering new address record for fe80::fcff:ffff:feff:ffff on vif1.0.
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.730: error : xenInotifyXendDomainsDirLookup:158 : internal error finding dom on config li
st
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.730: error : xenInotifyXendDomainsDirAddEntry:243 : internal error Error looking up domai
n
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.748: error : xenInotifyEvent:350 : internal error Error adding file to config cache
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.752: error : xenInotifyXendDomainsDirLookup:158 : internal error finding dom on config li
st
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.752: error : xenInotifyXendDomainsDirAddEntry:243 : internal error Error looking up domai
n
Apr 22 20:17:07 blade02 libvirtd: 20:17:07.752: error : xenInotifyEvent:350 : internal error Error adding file to config cache
Apr 22 20:45:42 blade02 kernel: tap tap-2-51712: 2 getting info
Apr 22 20:45:43 blade02 kernel: device vif2.0 entered promiscuous mode
Apr 22 20:45:43 blade02 kernel: ADDRCONF(NETDEV_UP): vif2.0: link is not ready
Apr 22 20:45:47 blade02 kernel: blktap: ring-ref 8, event-channel 14, protocol 2 (x86_32-abi)
Apr 22 20:45:51 blade02 kernel: ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
Apr 22 20:45:51 blade02 kernel: eth1: topology change detected, propagating
Apr 22 20:45:51 blade02 kernel: eth1: port 3(vif2.0) entering forwarding state
Apr 22 20:45:52 blade02 avahi-daemon[5611]: New relevant interface vif2.0.IPv6 for mDNS.
Apr 22 20:45:52 blade02 avahi-daemon[5611]: Joining mDNS multicast group on interface vif2.0.IPv6 with address fe80::fcff:ffff:feff:
ffff.
Apr 22 20:45:52 blade02 avahi-daemon[5611]: Registering new address record for fe80::fcff:ffff:feff:ffff on vif2.0.
Apr 22 23:03:21 blade02 gconfd (root-11518): GConf ?
Apr 22 23:03:21 blade02 gconfd (root-11518): ?
Apr 23 04:36:49 blade02 gconfd (root-20856): 시작 (버전 2.12.0), pid 5967 사용자 'root'
Apr 23 04:36:49 blade02 gconfd (root-20856): 주소 "xml:readonly:/etc/gconf/gconf.xml.mandatory"을(를) 위치 0에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 23 04:36:49 blade02 gconfd (root-20856): 주소 "xml:readwrite:/home/yjlee/.gconf"을(를) 위치 1에 있는 쓰기 가능한 설정 소스로 확인했습니다
Apr 23 04:36:49 blade02 gconfd (root-20856): 주소 "xml:readonly:/etc/gconf/gconf.xml.defaults"을(를) 위치 2에 있는 읽기 전용 설정 소스로 확인했습니다
Apr 23 04:41:53 blade02 syslogd 1.4.1: restart.
Apr 23 04:41:53 blade02 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Apr 23 04:41:53 blade02 kernel: Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
Apr 23 04:41:53 blade02 kernel: Linux version 2.6.18-194.32.1.el5xen (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (R
ed Hat 4.1.2-48)) #1 SMP Wed Jan 5 18:44:24 EST 2011
Apr 23 04:41:53 blade02 kernel: BIOS-provided physical RAM map:
Apr 23 04:41:53 blade02 kernel: Xen: 0000000000000000 - 000000085fd46000 (usable)
Apr 23 04:41:53 blade02 kernel: DMI 2.7 present.
Apr 23 04:41:53 blade02 kernel: >>> ERROR: Invalid checksum
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x10] lapic_id[0x20] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x18] lapic_id[0x30] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x14] lapic_id[0x24] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x34] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x04] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x12] lapic_id[0x22] enabled)
Apr 23 04:41:53 blade02 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)

adaylily의 이미지

일단 서버가 리부팅 이전에 에러로그가 좀 보이네요.
그걸 먼저 트러블 슈팅 하시는게 먼저 일것 같습니다.
좀 의문이긴 하네요.
vm이 먼저 리부팅 되었던가요?
vm 설정을 먼저 확인해보시기 바랍니다.
뭔가 초과된것 같은데, 이것만 봐서는 설정화면을 모르니까, 뭐가 설정 초과인지 모르겠습니다.