현재 위치

홈 ›› Forums ›› 공부 ›› 설치 및 활용 QnA

Freeradius 서버 운용하려 하는데 도와주세요 ㅠㅠ

bgyjjang의 이미지
글쓴이: bgyjjang / 작성시간: 일, 2010/08/01 - 4:11오후

Listening on authentication address 10.80.73.114 port 1645
Listening on accounting address 10.80.73.114 port 1813
Listening on command file /usr/local/var/run/radiusd/radiusd.sock
Ready to process requests.

rad_recv: Access-Request packet from host 10.80.73.120 port 1645, id=200, length=137
User-Name = "bgyjjang"
Framed-MTU = 1400
Called-Station-Id = "001f.ca4f.fe70"
Calling-Station-Id = "0022.6947.e014"
Service-Type = Login-User
Message-Authenticator = 0x22a8d4d3de9293a66010bc651923fad5
EAP-Message = 0x0202000d016267796a6a616e67
NAS-Port-Type = Wireless-802.11
NAS-Port = 564
NAS-Port-Id = "564"
NAS-IP-Address = 10.80.73.120
NAS-Identifier = "cisco"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bgyjjang", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 13
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[sql] expand: %{User-Name} -> bgyjjang
[sql] sql_set_user escaped user --> 'bgyjjang'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bgyjjang' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bgyjjang' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'user' ORDER BY id
[sql] User found in group user
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'user' ORDER BY id
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group eap {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 200 to 10.80.73.120 port 1645
EAP-Message = 0x010300160410daebfb07aef45a85d67f883d7bb23872
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ef5c7191ef6c3800c70f475b386b604
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.80.73.120 port 1645, id=201, length=148
User-Name = "bgyjjang"
Framed-MTU = 1400
Called-Station-Id = "001f.ca4f.fe70"
Calling-Station-Id = "0022.6947.e014"
Service-Type = Login-User
Message-Authenticator = 0x982547ccdf34ba975234f7030504c1c9
EAP-Message = 0x020300060319
NAS-Port-Type = Wireless-802.11
NAS-Port = 564
NAS-Port-Id = "564"
State = 0x1ef5c7191ef6c3800c70f475b386b604
NAS-IP-Address = 10.80.73.120
NAS-Identifier = "cisco"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bgyjjang", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[sql] expand: %{User-Name} -> bgyjjang
[sql] sql_set_user escaped user --> 'bgyjjang'
rlm_sql (sql): Reserving sql socket id: 3
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bgyjjang' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bgyjjang' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'user' ORDER BY id
[sql] User found in group user
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'user' ORDER BY id
rlm_sql (sql): Released sql socket id: 3
++[sql] returns ok
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
++[pap] returns noop
Found Auth-Type = EAP
+- entering group eap {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 201 to 10.80.73.120 port 1645
EAP-Message = 0x010400061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ef5c7191ff1de800c70f475b386b604
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.80.73.120 port 1645, id=202, length=259
User-Name = "bgyjjang"
Framed-MTU = 1400
Called-Station-Id = "001f.ca4f.fe70"
Calling-Station-Id = "0022.6947.e014"
Service-Type = Login-User
Message-Authenticator = 0x3b5e7c198124aca247968d6d200ea983
EAP-Message = 0x0204007519800000006b16030100660100006203014c551b605b942103f38e0d5d994d2118c5be3df614752fc7c4bca1570434b823000018002f00350005000ac013c014c009c00a0032003800130004010000210000000d000b0000086267796a6a616e67000a0006000400170018000b00020100
NAS-Port-Type = Wireless-802.11
NAS-Port = 564
NAS-Port-Id = "564"
State = 0x1ef5c7191ff1de800c70f475b386b604
NAS-IP-Address = 10.80.73.120
NAS-Identifier = "cisco"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bgyjjang", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 117
[eap] Continuing tunnel setup.
++[eap] returns ok
[sql] expand: %{User-Name} -> bgyjjang
[sql] sql_set_user escaped user --> 'bgyjjang'
rlm_sql (sql): Reserving sql socket id: 2
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bgyjjang' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bgyjjang' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'user' ORDER BY id
[sql] User found in group user
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'user' ORDER BY id
rlm_sql (sql): Released sql socket id: 2
++[sql] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group eap {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 107
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0066], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 002a], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 202 to 10.80.73.120 port 1645
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0xa73082038fa0030201020209
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ef5c7191cf0de800c70f475b386b604
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.80.73.120 port 1645, id=203, length=148
User-Name = "bgyjjang"
Framed-MTU = 1400
Called-Station-Id = "001f.ca4f.fe70"
Calling-Station-Id = "0022.6947.e014"
Service-Type = Login-User
Message-Authenticator = 0x7f85b4b8b547746a7dda0135fe03e968
EAP-Message = 0x020500061900
NAS-Port-Type = Wireless-802.11
NAS-Port = 564
NAS-Port-Id = "564"
State = 0x1ef5c7191cf0de800c70f475b386b604
NAS-IP-Address = 10.80.73.120
NAS-Identifier = "cisco"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bgyjjang", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
[sql] expand: %{User-Name} -> bgyjjang
[sql] sql_set_user escaped user --> 'bgyjjang'
rlm_sql (sql): Reserving sql socket id: 1
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bgyjjang' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bgyjjang' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'user' ORDER BY id
[sql] User found in group user
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'user' ORDER BY id
rlm_sql (sql): Released sql socket id: 1
++[sql] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group eap {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 203 to 10.80.73.120 port 1645
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 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
EAP-Message = 0x547abd4691390993
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ef5c7191df3de800c70f475b386b604
Finished request 3.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.80.73.120 port 1645, id=204, length=148
User-Name = "bgyjjang"
Framed-MTU = 1400
Called-Station-Id = "001f.ca4f.fe70"
Calling-Station-Id = "0022.6947.e014"
Service-Type = Login-User
Message-Authenticator = 0x6c1f1632e7ca144d950944ee1f4262cd
EAP-Message = 0x020600061900
NAS-Port-Type = Wireless-802.11
NAS-Port = 564
NAS-Port-Id = "564"
State = 0x1ef5c7191df3de800c70f475b386b604
NAS-IP-Address = 10.80.73.120
NAS-Identifier = "cisco"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bgyjjang", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 6 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
[sql] expand: %{User-Name} -> bgyjjang
[sql] sql_set_user escaped user --> 'bgyjjang'
rlm_sql (sql): Reserving sql socket id: 0
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bgyjjang' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bgyjjang' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'user' ORDER BY id
[sql] User found in group user
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'user' ORDER BY id
rlm_sql (sql): Released sql socket id: 0
++[sql] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group eap {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 204 to 10.80.73.120 port 1645
EAP-Message = 0x010700b5190050e2ce60bac7021853623a3138c0f0b7e29701529e3049a2a0e80144117a58207f3ffe1c2726cd9f5e098681e4bebde456a5b58a9a65d42f93872e8d80fbff56d969744151119fe37e7bd6690c995ce20f397cce0e16153f70696caa713779148d5b8fedc4258101f5cca35db50a45df3f1454cf240b48b77b462fce45554af2c58f691307b437738c4a2c500841adc85d01512c247e90ccfa17c48bf43ee2c7fdc54ee0269816030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ef5c7191af2de800c70f475b386b604
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.80.73.120 port 1645, id=205, length=148
User-Name = "bgyjjang"
Framed-MTU = 1400
Called-Station-Id = "001f.ca4f.fe70"
Calling-Station-Id = "0022.6947.e014"
Service-Type = Login-User
Message-Authenticator = 0xc3f37726a74d4ee02b3621f3fdb788e0
EAP-Message = 0x020700061900
NAS-Port-Type = Wireless-802.11
NAS-Port = 564
NAS-Port-Id = "564"
State = 0x1ef5c7191af2de800c70f475b386b604
NAS-IP-Address = 10.80.73.120
NAS-Identifier = "cisco"
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
[suffix] No '@' in User-Name = "bgyjjang", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 7 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
[sql] expand: %{User-Name} -> bgyjjang
[sql] sql_set_user escaped user --> 'bgyjjang'
rlm_sql (sql): Reserving sql socket id: 4
[sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'bgyjjang' ORDER BY id
[sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'bgyjjang' ORDER BY priority
[sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'user' ORDER BY id
[sql] User found in group user
[sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'user' ORDER BY id
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[pap] returns noop
Found Auth-Type = EAP
+- entering group eap {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 205 to 10.80.73.120 port 1645
EAP-Message = 0x010800061900
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ef5c7191bfdde800c70f475b386b604
Finished request 5.
Going to the next request
Waking up in 4.9 seconds.

Cleaning up request 0 ID 200 with timestamp +12
Cleaning up request 1 ID 201 with timestamp +12
Cleaning up request 2 ID 202 with timestamp +12
Cleaning up request 3 ID 203 with timestamp +12
Cleaning up request 4 ID 204 with timestamp +12
Cleaning up request 5 ID 205 with timestamp +12
Ready to process requests.

무선 AP 접속을 Radius 서버로 인증하려고 하는데요

AP와 EAP 를 사용해서 ID와 PASS 인증 하려고 하는데요 ID, PASS는 MYSQL 연동 하구 있구요

현재 증상이 Access-Challenge 메세지만 주고 받다가 그냥 끝나버려요 리젝트가 뜨는것도 아니고 ㅠㅠ

뭐가 잘못된건가요?? Client 는 윈도우 7 Radius Server는 centos 사용중입니다 ㅠㅠ

Forums: 
설치 및 활용 QnA

댓글 달기

텍스트 포맷에 대한 자세한 정보

Filtered HTML

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

BBCode

  • 텍스트에 BBCode 태그를 사용할 수 있습니다. URL은 자동으로 링크 됩니다.
  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param>
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.

Textile

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • You can use Textile markup to format text.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Markdown

  • 다음 태그를 이용하여 소스 코드 구문 강조를 할 수 있습니다: <code>, <blockcode>, <apache>, <applescript>, <autoconf>, <awk>, <bash>, <c>, <cpp>, <css>, <diff>, <drupal5>, <drupal6>, <gdb>, <html>, <html5>, <java>, <javascript>, <ldif>, <lua>, <make>, <mysql>, <perl>, <perl6>, <php>, <pgsql>, <proftpd>, <python>, <reg>, <spec>, <ruby>. 지원하는 태그 형식: <foo>, [foo].
  • Quick Tips:
    • Two or more spaces at a line's end = Line break
    • Double returns = Paragraph
    • *Single asterisks* or _single underscores_ = Emphasis
    • **Double** or __double__ = Strong
    • This is [a link](http://the.link.example.com "The optional title text")
    For complete details on the Markdown syntax, see the Markdown documentation and Markdown Extra documentation for tables, footnotes, and more.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 사용할 수 있는 HTML 태그: <p><div><span><br><a><em><strong><del><ins><b><i><u><s><pre><code><cite><blockquote><ul><ol><li><dl><dt><dd><table><tr><td><th><thead><tbody><h1><h2><h3><h4><h5><h6><img><embed><object><param><hr>

Plain text

  • HTML 태그를 사용할 수 없습니다.
  • web 주소와/이메일 주소를 클릭할 수 있는 링크로 자동으로 바꿉니다.
  • 줄과 단락은 자동으로 분리됩니다.
댓글 첨부 파일
이 댓글에 이미지나 파일을 업로드 합니다.
파일 크기는 8 MB보다 작아야 합니다.
허용할 파일 형식: txt pdf doc xls gif jpg jpeg mp3 png rar zip.
CAPTCHA
이것은 자동으로 스팸을 올리는 것을 막기 위해서 제공됩니다.