타겟 보드에 커널이미지를 올리고 UBI 루트파일 시스템을 올리는데 자꾸 커널 패닉이 뜨네요..

생초짜라서 봐도 잘 모르겠습니다.
아무래도 루트파일 시스템 이미지를 잘못 만들어서 올린것 같은데
뭐가 문제인지 확인을 못하겠어요...
질문이 어이 없을 수도 있지만 도움 부탁드립니다.

Starting kernel ...

Uncompressing Linux...
Decompression OK, 359260 kernel bytes
done, booting the kernel.
Linux version 2.6.29 (root@leedonghwa-desktop) (gcc version 4.2.1 (CodeSourcery
ls
Sourcery G++ Lite 2007q3-51)) #1 PREEMPT Wed Jul 1 13:46:16 KST 2009essor [410fb766] revision 6
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387figned 2048)uxed
mm
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
CPU: VIPT
UBI: data offset: 4096ing instru
Machine: NCPlash/nand pa
Memory policy: ECC disabled, Data cache writeback
UBI: volume 2 ("ubifs"
CPU S3C6410 (id 0x36410101)EBsachine: NCPM testck 547
S3C24XX Clocks, (c) 2004 Simtec Electronics
Memory poli
S3C64XX: PLL settings, A=533000000, M=533000000, E=192000000td3 to ubi0lock 634 at 0x04f40000pu
mmc_bus: source is mout_epll (0), rate is 192000000
UBI: number of PEBs reserved
mmc_bus: source is mout_epll (0), rate is 192000000
mmc
usb-bus-host: source is clk_48m (0), rate is 48000000
UBI: max/mean erase counter:
uclk1: source is dout_mpll (1), rate is 66625000
mm
spi-bus: source is mout_epll (0), rate is 192
irda-bus: source is mout_epll (0), rate is 192000000
W1 # run
g_ether gadget: usi
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 325121 #tor

Registered gadget driver 'g_ether'rce is mout_epll (0), ra
Kernel command line: root=/dev/mtdblock4 rootfstype== ubifs ubi.mtd=3 console=ttce: PS/2 mouse device common for all mice: Registered
ySAC2,115200n8 mem=128M vram=24M mtdparts=onenand:256k(bootloader),128k@0x40000(
input: gpio-keys as /devices/platform/gpio-keys.0/input/input0Hz, Hclk =
params),2m@0x60000(kernel),-(UBI)
PID hash table entries: 512 (ord
i2c-
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Connected!!

S3C Power Management,
Calibrating delay loop... 532.48 BogoMIPS (lpj=2662400)ead 0x50008000 0x0 0x4000
Mount-cache hash table entries: 512
Bluetooth: HCI H4 protocol initi
CPU: Testing write buffer coherency: okth:
net_namespace: 564 bytes

regulator: core
s3c64xx_dma_init1: registering DMA 2 (c8808140)h: HCI socket l
s3c64xx_dma_init1: registering DMA 3 (c8808160)
Bluet
s3c64xx_dma_i

s3c64xx_dma_init1: registering DMA 4 (c8808180) console=ttySAC2,1
s3c64xx_dma_init1: registering DMA 5 (c88081a0)s3c-sdhci.1: clock source 0: hsmmc (133250000 H
s3c64xx_dma_init1: registering DMA 6 (c88081c0)
Sca
s3c64xx_dma_init1: registering DMA 7 (c88081e0)
s3c64xx_d

partition=onen
s3c64xx
s3c64xx_dma_init1: registering DMA 11 (c880c160)
mtd

s3c64xx_dma_init1: registering DMA 12 (c880c180)nnection manager initializedder),128k@0x40000
s3c64xx_dma_init1: registering DMA 13 (c880c1a0)
s3c64
s3c64xx_dma_init1: registering DMA 14 (c880c1c0)8080et layer initialized Lite 2007q3-51)) #1 PRE
s3c64xx_dma_init1: registering DMA 15 (c880c1e0)
PL080: IRQ 74, at c880c000
ncp_sdhci1_cfg_gpio:
S3C6410: Initialising architecture
bio: create slab at 04s
IP route cache
cpufreq: Failed to obtain VDDARM: -19
One na
cpufreq: Only frequency scaling availableing the default (USA)One nand probe 5gica
msgmni has been set to 246
io scheduler noop registered (default)(LM49350)
TCP cubic
s3c-fb s3c-fb: window 0: fb
NET: Registered protoco
s3c-fb s3c-fb: window 1: fb
Bluetooth
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10lized
Bluetooth: SCO (Voice Link) ve
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10ed
Bluetooth: RFCOMM socket layer init
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
loop: module loaded
RP
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright P
One nand probe 8ck4" or unknown-
One nand probe 9
Muxed OneNAND 256MB 1.8V 16-bit (0x40)
Please append a correct "root=" boo
OneNAND version = 0x0121ailable partitions:
s3c64xx_onenand_readw: Illegal access at reg 0xf240, value 0x0<6>Scanning device 256 mtdblock0 (driver?)
1f01
for bad blocksmtdblock1 (driv

U-Boot 1.3.4-00354-g37aa198-dirty (Apr 9 2009 - 11:43:50) for W1dblock2 (driver?)
1f03

CPU: S3C6410@533MHz Revision 1
Fclk = 533MHz, Hclk = 133MHz, Pclk = 66MHz (SYNC Mode)
1f05 220720 mtdblock5 (driver?
Board: W1(New Concept Pho

Bad eraseblock 634 at 0x04f4000033MHz Revision 1
Bad eraseblock 1099 at 0x0896000033MHz, Hclk = 133MHz, Pclk = 66MH
Bad eraseblock 1239 at 0x09ae0000
Bad eraseblock 1722 at 0x0d740000hone)
OneNAND: 256 MB
M
In: serial56MB 1.8V 16-
Out: serial
Err: serial
OneNA
Hit any key to stop autoboot: 0
Scanning device for b
W1 #ocks
W1 #
W1 #
W1 #
W1 #ad e
W1 # usb 547 at
Start USB Downloader (ver1 - Apr 9 2009, 11:43:57)block 634 at 0x04f40000
Set GPIOs!!seblock 109
USB Start!! - High Speed

Connected!!ck 1239 at
Download request from
OneNAND: 256 MB
COMMAND_WRITE_UBI
Out
onenand erase 260000 0xfda0000
Err: seri
Erase block from 19 to 2047
Hit any key t
Skip erase bad block 547 at 0x4460000
W1 # usb
Start
Skip erase bad block 634 at 0x4f40000:43:57)
Skip erase bad block 1099 at 0x8960000NAND Sync. Burst Read enabledsum
Skip erase bad block 1239 at 0x9ae0000!!(kernel),-(
US
Skip erase bad block 1722 at 0xd740000
Connected!!
One

onenand write 0x50000000 0x260000 0x2000000
4 c
Receive the p
Write from 0x260000 to 0x2260000 (256 + 0 blocks)

COMMAND_DOWNLOAD_IMAGE: 4, 65536 b

COMMAND_DOWNLOAD_IMAGE
Download to 0x5
Download to 0x50000000, 1703936 bytes

Uncompres
COMMAND_WRITE_WR
DRAM: 128 MB00 0x2260000
Muxed OneNAND 256MB 1.8V 16-bit (0x40)
Write
OneNAND version = 0x0121000 (13 + 0 blocks)e:
Scanning device for bad blocksusing r
Bad eraseblock 547 at 0x04460000
Bad eraseblock 634 at 0x04f40000

Bad eraseblock 1099 at 0x08
Hit any key to stop autoboot: 0
OneNAND version = 0x0121
Read from 0x60000 to 0x260000 (16 + 0 blocks)ocks
Bad eraseb
## Booting kernel from Legacy Image at 51008000 ...e)
Image Name: Linux-2.6.29 634 at 0x04f40000s 533000000
Image Type: ARM Linux Kernel Image (uncompressed)
Bad eraseblock 1099 at 0x08960000
Data Size: 1918964 Bytes = 1.8 MBae0000 using random self ethernet addre
Load Address: 50008000
Entry Point: 50008000ock 1722 at 0x0d740000 ra
Verifying Checksum ... OK
Loading Kernel Image ... OK
In: serial
OK

Starting kernel ...

Entry Point: 500080000> a
Machine: NCP
Verifyin
Memory policy: ECC disabled, Data cache writeback
CPU S3C6410 (id 0x36410101).. OK
S3C24XX Clocks, (c) 2004 Simtec Electronics,128k@0x4
Li
mout_apll: source is fout_apll (1), rate is 533000000ion 4.2.1 (CodeSourcery
mout_epll: source is fout_epll (1), rate is 192000000AND version = 0x0121steri
mout_mpll: source is mpll (1), rate is 533000000
Machine: NCP
mmc_bus: source is mout_epll (0), rate is 192000000he writeback
mmc_bus: source is mout_epll (0), rate is 1920000000x36410101)eded in detecting devicees)
mmc_bus: source is mout_epll (0), rate is 192000000ocks, (c) 2004 Simtec Electronics
usb-bus-host: source is clk_48m (0), rate is 48000000000000, M=533000000, E=192000000
uclk1: source is dout_mpll (1), r
input: max735
mo
audio-bus: source is mout_epll (0), rate is 192000000
Er
irda-bus: source is mout_epll (0), rate is 192000000ci1_cfg_gpio: setup sdhci bus 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
spi-bus: source is m
Kernel command line: root=/dev/mtdblock4 rootfstype== ubifs ubi.mtd=3 console=tt
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3
ySAC2,115200n8 mem=128M vram=24M mtdparts=onenand:256k(bootloader),128k@0x40000(
audio-bus: source is mout_epll (0
console [ttySAC2] enabled
Bad
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)es)TD parti
Memory: 128MB = 128MB total Genslabs=12, HWalign=32, O
Memory: 126192KB available (3196K code, 258K data, 92K init)
Bluetooth:
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1g delay loop... 532.48 BogoMIPS (lpj=2662400)
Calibrating delay loop... 532.48 BogoMIPS (lpj=2662400)i2sialized880818
Mount-cache hash table entriesie
net_namespace: 564
NET: Registered protocol family 16ator: core version 0.5ed pro
S3C Power Management, Copyright 2004 Simtec Electronicsfamily 162=c0004120, 3=80808080che hash tab
s3c64xx_dma_init: Registering DMA channels
S3C Power Management, Copyri
s3c64xx_dma_init1: registering DMA 0 (c8808100)
s3c64xx_dma_
s3c64xx_dma_init1: registering DMA 1 (c8808120)vice 80x
s3c64xx_dma_init1: registering DMA 2 (c8808140) registering DMA 7 (c88081e0)rnet Emulation) ve
s3c64xx_dma_init1: registering DMA 3 (c8808160)
s3c64xx_dma_init1: registering DMA 4 (c8808180)
s3c64xx_dma_init1: register
s3c64xx_dma_init1: registering DMA 5 (c88081a0)

s3c64
i2
1f00 256
s3c64xx_dma_init1: registering DMA 9 (c880c120)a_init1: registering DMA 14 (c880c1c0) a
s3c64xx_dma_init1: registering DMA 10 (c880c140)xx_dma_init1: registering DMA 15 (c880c1e0) 12
s3c64xx_dma_init1: registering DMA 11 (c880c160)
s3c64xx_dma_init1: registering DMA 12 (c880c180) IRQ 74, at c880c000
S
s3c64xx_dma_init1: registering DMA 13 (c880c1a0)
1f02 2048 mtd
s3c64xx_dma_init1: registering DMA 14 (c880c1c0)at 0
Bluetooth: Cor
s3c64xx_dma_init1: registering DMA 15 (c880c1e0) 1

NET: Registered protocol family 2nfigured (established 4096 bind 4
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP reno regis
TCP established hash table entries: 4096 (order: 3, 32768 bytes)ed 2048)rom
regulato
TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
Bad eraseblock 123
TCP: Hash tables configured (established 4096 bin

s3c6400-uart.1: s3c
msgmni has been set to 2465400 (irq = 20) is a S3C64
io scheduler noop registered (default)
s3c-fb s3c-fb: window 0: fb
Erase block
s3c-fb s3c-fb: window 1: fbs3c2410_serial2 at MMIO 0x7
s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
Skip erase bad block 547 at 0x4460000S
s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
libertas_sdio: Libertas SDIO driver
s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (ick

Bad eraseblock 1099 at 0x089
One nand probe
One nand probe a
Bad
One nand probe 2at 0x09ae0000ini
One nand probe 3PS/2 mouse de
One nand probe 4
One nand probe 5
Ba
One nand probe 6 at 0x0d740000
One nand probe 7

One nand probe 80
One nand probe 9Burst Read enabl
Muxed OneNAND 256MB 1.8V 16-bit (0x40) S3C6410@533MHz Revision 1fg_gpio
OneNAND version = 0x0121
0x00000004
s3c64xx_onenand_readw: Illegal access at reg 0xf240, value 0x0<6>Scanning devicentries
0x000000060000-0x000000260000 : "kernel"Hz, Pclk = 66MHz
for bad blocks/device
Bad eraseblock 547 at 0x04460000
Bad eraseblock 634 at 0x04f400000000 : "UBI"0u
Bad eraseblock 1099 at 0x0896000obe 12

0x000000060000-0x000000260000 : "kernel" 253 MiB4: usi
0x000000260000-0x000010000000 : "UBI"
UBI: number of good PEBs: 20
One nand probe 12
UBI: attaching mtd3 to ubi0
UBI: number of bad PEBs:
UBI: physical eraseblock size: 131072 bytes (128 KiB)from 0x60000 to 0x2

UBI: logical eraseblock
UBI: attached mtd3 to ubi0
UBI: MTD device name: "UBI" 0
UBI: MTD device size: 253 MiB024-003a: keys FIFO is 0x3f
UBI: number of good PEBs: 2024
Lo
g_ether gadg
UBI: number of bad PEBs: 5essx
UBI: max. allowed volumes: 128.6.29 (root@leedonghwa-desktop)
UBI: wear-leveling threshold: 4096
g_ether gadget: using random host
UBI: number of internal volumes: 1
u
UBI: number of user volumes: 2
sdhci: Secure D
mice: PS/2 mouse device common for all m
g_ether gadget: using random self ethernet addressdio: Co
regulator: DCDC1: 1200
g_ether gadget: using random host ethernet address
regulator: DCDC2: 1000 <
usb0: MAC 32:70:13:c0:fc:6c
usb0: HOST MAC 26:4e:3c:d4:8c:54DC3: 3000 mV
g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
regulator: LDO2: 2600 mV dout_mpll (1), rate i
g_ether gadget: g_ether ready

input: MELPAS MCS-5000 Touchscreen as /devices/platform/i2c-gpio.3/i2c-adapter/i
audio-bus: source
2c-3/3-0020/input/input1
input:
i2c-gpio i2c-gpio.3: using pins 20 (SDA) and 18 (SCL)r/i2c-0/0-003a/input
i2c-gpio i2c-gpio.2: using pins 33 (SDA) and 32 (SCL)
VFS:
lm49350: d
/input2
s3c2440
regulator: DCDC1: 1200 mV S3C I2C adapter00000-i2s
regulator: DCDC2: 1000 <--> 1200 mV
regulator: DCDC3: 3000 mVdriver ver 2.2
regulator: LDO1: 3000 mVPIO-59 autorequ
regulator: LDO2: 2600 mV4 pro
VFS: C
input: max7359 as /devices/platform/s3c2440-i2c.0/i2c-adapter/i2c-0/0-003a/input
s3c64xx_dma_init1: regi
/input2
s
s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter0808080
Bluetooth: HCI UART driver ver 2.2e block 0-204
Bluetooth: HCI H4 protocol initializeddhci bus 1, wid
sdhci: Secure Digital Host Controller Interface driver
Motor enable gpio 0ng DMA 14 (c880c1c0
sdhci: Copyright(c) Pierre Ossman4xx vibetones registed
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133250000 Hz)sion 1.0.18a.
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133250000 Hz)
ncp_sdhci1_cfg_gpio: setup sdhci bu
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (192000000 Hz)
s3c6410_setup_sdhci0_cfg_card
ncp_sdhci1_cfg_gpio: setup sdhci bus 1, width 0

PL080: IRQ
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080fg_card: CTRL 2=c0004120, 3=00008080
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004100, 3=80808080
GPIO-59 auto
ncp_sdhci1_cfg_gpio: setup sdhci bus 1, width 1stede loadedr IEEE802
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004120, 3=80808080vironm

GPIO-146 autorequested SDIO driver W1(Ne
Registered motor device: vibetones
ALSA device list:
Motor enable gpio 0: SCO socket layer
s3c64xx vibetones registed
Bl
Advanced Linux Sound Architecture Driver Version 1

libertas: 00:13:e0:f8
ncp_sdhci1_cfg_gpio: setup sdhci bus 1, width 1
l
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004120, 3=80808080
ncp_sdhci1_cfg_gpio: setup sdhci bus 1, width 1yet
s3c6410_setup_sdhci0_cfg_card: CTRL 2=c0004120, 3=00008080
libertas: PREP_CMD: c
1f00 256 mtdblock0 (driver?)
libertas_sdio mmc0:0001:1: firmware: using built-in firmware sd8686.bin
1f02 2048 mtdblock2 (driver?)
No device for DAI s3c64xx-i2s
1f03 259712 mtdb
LM49350 Audio Codec 0.01
asoc: LM49350 HIFI <-> s3c64xx-i2s mapping ok)
1f0
GPIO-59 autorequestedlock5 (driver?)
GPIO-24 autorequested
Kernel p
lm49350: dapm reg = 7S: Unable to mount ro
GPIO-146 autorequested31,4)
ALSA device list:
Bluetooth: SCO socket layer initialized
libertas: 00:13:e0:f8:61:17, fw 9.70.3p36, cap 0x00000303
libertas: unidentified region code; using the default (USA)
eth0 (libertas_sdio): not using net_device_ops yet
libertas: PREP_CMD: command 0x00a3 failed: 2
libertas: PREP_CMD: command 0x00a3 failed: 2
libertas: eth0: Marvell WLAN 802.11 adapter
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
VFS: Cannot open root device "mtdblock4" or unknown-block(31,4)
Please append a correct "root=" boot option; here are the available partitions:
1f00 256 mtdblock0 (driver?)
1f01 128 mtdblock1 (driver?)
1f02 2048 mtdblock2 (driver?)
1f03 259712 mtdblock3 (driver?)
1f04 27164 mtdblock4 (driver?)
1f05 220720 mtdblock5 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)