C:\Users\user>adb shell root@android:/ # dmesg dmesg <6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.31 (yslee@bluebird) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT Tue Mar 26 19:22:42 KST 2013 <4>[ 0.000000] CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache <4>[ 0.000000] Machine: bluebird <6>[ 0.000000] android_display: setting default resolution 800*1280, bpp=4 <6>[ 0.000000] android_display: tiler1d 32768000 <6>[ 0.000000] android_display: setting fb0.vram to 8519680 <6>[ 0.000000] android_display: setting vram to 8519680 <6>[ 0.000000] android_display: ion carveouts: 90963968 tiler2d, 10485760 nonsecure <6>[ 0.000000] omap4_total_ram_size = 0x40000000 <6>[ 0.000000] omap4_smc_size = 0x300000 <6>[ 0.000000] omap4_ion_heap_secure_input_size = 0x5a00000 <6>[ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_size = 0x1000000 <6>[ 0.000000] omap4_ducati_heap_size = 0x6900000 <6>[ 0.000000] omap4_ion_heap_tiler_mem_size = 0x5800000 <6>[ 0.000000] omap4_ion_heap_nonsec_tiler_mem_size = 0xa00000 <6>[ 0.000000] omap4_smc_addr = 0xbfd00000 <6>[ 0.000000] omap4_ion_heap_secure_input_addr = 0xba300000 <6>[ 0.000000] omap4_ion_heap_secure_output_wfdhdcp_addr = 0xb9300000 <6>[ 0.000000] omap4_ducati_heap_addr = 0xb2a00000 <6>[ 0.000000] omap4_ion_heap_tiler_mem_addr = 0xad200000 <6>[ 0.000000] omap4_ion_heap_nonsec_tiler_mem_addr = 0xac800000 <6>[ 0.000000] omap_ion_init: secure_input id=2 [ba300000-bfd00000] size=5a00000 <6>[ 0.000000] omap_ion_init: secure_output_wfdhdcp id=5 [b9300000-ba300000] size=1000000 <6>[ 0.000000] omap_ion_init: tiler id=1 [ad200000-b2a00000] size=5800000 <6>[ 0.000000] omap_ion_init: nonsecure_tiler id=3 [ac800000-ad200000] size=a00000 <6>[ 0.000000] omap_ion_init: system id=0 [0-0] size=0 <6>[ 0.000000] omap_ion_init: tiler_reservation id=4 [0-0] size=0 <6>[ 0.000000] Reserving 10485760 bytes SDRAM for VRAM <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <6>[ 0.000000] OMAP4430 ES2.3 <6>[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xd000 <7>[ 0.000000] On node 0 totalpages: 179200 <7>[ 0.000000] free_area_init_node: node 0, pgdat c0891de0, node_mem_map c1029000 <7>[ 0.000000] Normal zone: 256 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7 <7>[ 0.000000] HighMem zone: 1792 pages used for memmap <7>[ 0.000000] HighMem zone: 144640 pages, LIFO batch:31 <6>[ 0.000000] Warm Reset WA: succeeded to reconfigure the ABE DPLL <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1834000 s7136 r8192 d13344 u32768 <7>[ 0.000000] pcpu-alloc: s7136 r8192 d13344 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 177152 <5>[ 0.000000] Kernel command line: console=ttyO1,115200n8 mem=1G vmalloc=768M androidboot.console=ttyO1 omap_wdt.timer_margin=30 androidboot.serialno=09118C 4617009014 androidboot.bootloader=U-Boot_1.1.4-20130322_t2^0-dirty <6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) <6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) <6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) <6>[ 0.000000] Memory: 256MB 444MB = 700MB total <5>[ 0.000000] Memory: 698108k/698108k available, 350468k reserved, 585728K highmem <5>[ 0.000000] Virtual kernel memory layout: <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) <5>[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .init : 0xc0008000 - 0xc0058000 ( 320 kB) <5>[ 0.000000] .text : 0xc0058000 - 0xc0826000 (7992 kB) <5>[ 0.000000] .data : 0xc0826000 - 0xc0892940 ( 435 kB) <5>[ 0.000000] .bss : 0xc0892964 - 0xc09e3c28 (1349 kB) <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:410 <4>[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck. <6>[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000061] Calibrating delay loop... 1194.24 BogoMIPS (lpj=4665344) <6>[ 0.070373] pid_max: default: 32768 minimum: 301 <6>[ 0.070709] Mount-cache hash table entries: 512 <6>[ 0.071746] Initializing cgroup subsys debug <6>[ 0.071777] Initializing cgroup subsys cpuacct <6>[ 0.071838] Initializing cgroup subsys freezer <6>[ 0.071899] CPU: Testing write buffer coherency: ok <6>[ 0.072509] L310 cache controller enabled <6>[ 0.072540] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B <4>[ 0.151153] CPU1: Booted secondary processor <6>[ 0.181884] Brought up 2 CPUs <6>[ 0.181915] SMP: Total of 2 processors activated (2388.48 BogoMIPS). <4>[ 0.186279] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw <4>[ 0.186279] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr <4>[ 0.186309] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1 <4>[ 0.186309] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2 <4>[ 0.186340] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe <4>[ 0.186340] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg <4>[ 0.186370] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per <4>[ 0.186370] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup <4>[ 0.186401] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private <4>[ 0.186492] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if <4>[ 0.186553] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci <4>[ 0.186553] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci <4>[ 0.186859] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck. <3>[ 0.192169] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002) <4>[ 0.195220] omap_hwmod: mcpdm: cannot be enabled (3) <6>[ 0.198059] print_constraints: dummy: <6>[ 0.198364] NET: Registered protocol family 16 <6>[ 0.198577] GPMC revision 6.0 <6>[ 0.200042] EMIF0 is enabled with IRQ142 <6>[ 0.200164] EMIF1 is enabled with IRQ143 <6>[ 0.200195] Last reset was warm software reset (PRM_RSTST=0x2) <6>[ 0.200195] <6>[ 0.200805] OMAP GPIO hardware version 0.1 <6>[ 0.203186] omap_mux_init: Add partition: #1: core, flags: 2 <6>[ 0.204620] omap_mux_init: Add partition: #2: wkup, flags: 2 <4>[ 0.206573] BId_0: 0 <4>[ 0.206573] BId_1: 0 <4>[ 0.206604] BId_2: 1 <4>[ 0.206604] BId_3: 1 <4>[ 0.206634] Board Revision : 3 <4>[ 0.207092] bp 50 i2c_4_BP50 : 3 <4>[ 0.207122] mpu3050_data : 28 <4>[ 0.207122] mpu3050_data : 28 <4>[ 0.208618] brcm_wlan_init: start <4>[ 0.208648] BId_0: 0 <4>[ 0.208648] BId_1: 0 <4>[ 0.208648] BId_2: 1 <4>[ 0.208648] BId_3: 1 <4>[ 0.208679] Board Revision : 3 <4>[ 0.314697] BId_0: 0 <4>[ 0.314697] BId_1: 0 <4>[ 0.314697] BId_2: 1 <4>[ 0.314727] BId_3: 1 <4>[ 0.314727] Board Revision : 3 <4>[ 0.314727] wlan_GPIO : 36 <4>[ 0.315307] ========= DC5V_EN2 error <6>[ 0.477264] OMAP DMA hardware revision 0.0 <3>[ 0.477996] omap_rproc_get_pool: dsp - no carveout memory is available at all <4>[ 0.478179] omap_rproc_get_pool: ipu - carveout memory is unavailable: 0x0, 0x0 <6>[ 0.489257] bio: create slab at 0 <4>[ 0.490112] i2c-core: driver [twl] using legacy suspend method <4>[ 0.490142] i2c-core: driver [twl] using legacy resume method <5>[ 0.490539] SCSI subsystem initialized <6>[ 0.490753] usbcore: registered new interface driver usbfs <6>[ 0.490936] usbcore: registered new interface driver hub <6>[ 0.491088] usbcore: registered new device driver usb <6>[ 0.491973] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz <4>[ 0.492767] Skipping twl internal clock init and using bootloader value (unknown osc rate) <6>[ 0.496856] twl6030: PIH (irq 39) chaining IRQs 368..387 <6>[ 0.499603] print_constraints: VUSB: 3300 mV normal standby <6>[ 1.017761] PC detected <6>[ 1.017791] twl6030_usb twl6030_usb: Initialized TWL6030 USB module <6>[ 1.018646] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby <6>[ 1.019592] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby <6>[ 1.020446] print_constraints: VUSIM: 3000 mV normal standby <6>[ 1.021759] print_constraints: VCXIO: 1800 mV normal standby <6>[ 1.023010] print_constraints: VDAC: 1800 mV normal standby <6>[ 1.023620] print_constraints: VAUX1_6030: 1000 <--> 3000 mV at 2800 mV normal standby <6>[ 1.024169] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby <6>[ 1.025115] print_constraints: VAUX3_6030: 1000 <--> 1800 mV at 1200 mV normal standby <6>[ 1.026550] print_constraints: VDD1: <6>[ 1.028015] print_constraints: VDD2: <6>[ 1.029479] print_constraints: V2V1: at 2100 mV <6>[ 1.030731] print_constraints: VANA: 2100 mV normal standby <6>[ 1.031738] print_constraints: CLK32KG: <6>[ 1.032745] print_constraints: CLK32KAUDIO: <6>[ 1.034088] print_constraints: SYSEN: <6>[ 1.035400] print_constraints: REGEN1: <6>[ 1.036407] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz <6>[ 1.036834] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz <6>[ 1.037109] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz <6>[ 1.038208] omap-rproc omap-rproc.0: dsp is available <6>[ 1.038299] omap-rproc omap-rproc.1: ipu is available <6>[ 1.038482] Advanced Linux Sound Architecture Driver Version 1.0.24. <6>[ 1.039337] Bluetooth: Core ver 2.16 <6>[ 1.039398] NET: Registered protocol family 31 <6>[ 1.039428] Bluetooth: HCI device and connection manager initialized <6>[ 1.039459] Bluetooth: HCI socket layer initialized <6>[ 1.039459] Bluetooth: L2CAP socket layer initialized <6>[ 1.039520] Bluetooth: SCO socket layer initialized <6>[ 1.040069] cfg80211: Calling CRDA to update world regulatory domain <6>[ 1.041320] Switching to clocksource 32k_counter <6>[ 1.043701] musb-hdrc: version 6.0, musb-dma, peripheral <7>[ 1.044036] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) <7>[ 1.044097] musb-hdrc: MHDRC RTL version 2.0 <7>[ 1.044128] musb-hdrc: setup fifo_mode 4 <7>[ 1.044128] musb-hdrc: 28/31 max ep, 16384/16384 memory <6>[ 1.044128] musb-hdrc musb-hdrc: USB Peripheral mode controller at fc0ab000 using DMA, IRQ 124 <6>[ 1.044708] NET: Registered protocol family 2 <6>[ 1.045288] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) <6>[ 1.045288] TCP established hash table entries: 16384 (order: 5, 131072 bytes) <6>[ 1.045288] TCP bind hash table entries: 16384 (order: 6, 393216 bytes) <6>[ 1.046813] TCP: Hash tables configured (established 16384 bind 16384) <6>[ 1.047973] TCP reno registered <6>[ 1.047973] UDP hash table entries: 64 (order: 0, 4096 bytes) <6>[ 1.047973] UDP-Lite hash table entries: 64 (order: 0, 4096 bytes) <6>[ 1.047973] NET: Registered protocol family 1 <6>[ 1.049041] Switched to NOHz mode on CPU #0 <6>[ 1.049041] Switched to NOHz mode on CPU #1 <6>[ 1.049255] RPC: Registered named UNIX socket transport module. <6>[ 1.049285] RPC: Registered udp transport module. <6>[ 1.049285] RPC: Registered tcp transport module. <6>[ 1.049316] RPC: Registered tcp NFSv4.1 backchannel transport module. <6>[ 1.049316] Trying to unpack rootfs image as initramfs... <6>[ 1.066558] Freeing initrd memory: 160K <4>[ 1.189819] omap_init_opp_table: no hwmod or odev for hsi, [18] cannot add OPPs. <4>[ 1.189819] omap_init_opp_table: no hwmod or odev for hsi, [19] cannot add OPPs. <4>[ 1.189819] [BCM4330]bcm4330_bluetooth_probe 111 <4>[ 1.199462] [BCM4330]-rfkill_register <4>[ 1.199707] [BCM4330]set_power blocked(0) <4>[ 1.199829] [BCM4330]set_power blocked(1) <4>[ 1.199829] [BCM4330]bcm_bt_lpm_init <4>[ 1.199859] [BCM4330]bcm_bt_lpm_init 333 <4>[ 1.199859] [BCM4330]bcm_bt_lpm_init:host_wake(1) <4>[ 1.199890] [BCM4330]bcm_bt_lpm_init:gpio_to_irq(BT_HOST_WAKE_GPIO) irq(215) <4>[ 1.199890] [BCM4330]bcm_bt_lpm_init:irq_set_irq_wake <4>[ 1.200103] [BCM4330]bcm_bt_lpm_init+ <4>[ 1.200103] [BCM4330]+probe <6>[ 1.200103] ram_console: got buffer at 90000000, size 200000 <6>[ 1.200103] ram_console: found existing buffer, size 355539, start 355539 <6>[ 2.472442] console [ram-1] enabled <6>[ 2.472442] omap-iommu omap-iommu.0: ducati registered <6>[ 2.473724] omap-iommu omap-iommu.1: tesla registered <4>[ 2.489501] highmem bounce pool size: 64 pages <6>[ 2.489501] ashmem: initialized <6>[ 2.500549] fuse init (API version 7.16) <6>[ 2.500549] msgmni has been set to 219 <6>[ 2.502319] Registering char device tf_driver (122:0) <6>[ 2.502319] SMCAG01.06p6.0 D <6>[ 2.505340] io scheduler noop registered <6>[ 2.505432] io scheduler deadline registered <6>[ 2.505432] io scheduler cfq registered (default) <6>[ 2.505432] start plist test <6>[ 2.510162] end plist test <6>[ 2.513397] OMAP DSS rev 4.0 <3>[ 2.516479] Keyboard driver not present <7>[ 2.517456] LD070WX3 display0: ld070wx3_probe <7>[ 2.517486] LD070WX3 display0: update brightness to 127 <7>[ 2.533966] LD070WX3 display0: ld070wx3_probe done <6>[ 2.534515] dsscomp: initializing. <7>[ 2.534515] misc dsscomp: display0=LD070WX3 <7>[ 2.534851] misc dsscomp: display1=hdmi_panel <6>[ 2.534973] misc dsscomp: found 2 displays and 4 overlays, WB overlay 1 <3>[ 2.535644] could not allocate slot <7>[ 2.620330] LD070WX3 display0: enable <7>[ 2.620330] LD070WX3 display0: power_on <4>[ 2.635131] dsi_dcs_write_0: c0856d40/1 <4>[ 2.660705] [bluedisk] LCD ID Read 0 <4>[ 2.660705] [bluedisk] LCD LCM MIPI Command Write Start <7>[ 2.792968] LD070WX3 display0: power_on done <6>[ 2.792968] cannot apply mgr(tv) on inactive device <4>[ 2.792968] omapfb omapfb: failed to apply dispc config <6>[ 2.792968] cannot apply mgr(lcd2) on inactive device <4>[ 2.792968] omapfb omapfb: failed to apply dispc config <6>[ 2.797821] omap-rproc omap-rproc.1: powering up ipu <6>[ 2.798095] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully <6>[ 2.799194] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully <6>[ 2.799194] omap_uart.0: ttyO0 at MMIO 0x4806c000 (irq = 105) is a OMAP UART0 <6>[ 2.801574] omap_uart.1: ttyO1 at MMIO 0x48020000 (irq = 106) is a OMAP UART1 <6>[ 4.207641] console [ttyO1] enabled <6>[ 4.211761] omap_uart.2: ttyO2 at MMIO 0x4806e000 (irq = 102) is a OMAP UART2 <6>[ 4.220306] omap_ion_probe: adding heap secure_input of type 2 with ba300000@5a00000 <6>[ 4.229248] omap_ion_probe: adding heap secure_output_wfdhdcp of type 2 with b9300000@800000 <6>[ 4.238555] omap_ion_probe: adding heap tiler of type 4 with ad200000@5800000 <6>[ 4.238586] omap_ion_probe: adding heap nonsecure_tiler of type 4 with ac800000@a00000 <6>[ 4.255401] omap_ion_probe: adding heap system of type 0 with 0@0 <6>[ 4.262145] omap_ion_probe: adding heap tiler_reservation of type 5 with 0@0 <6>[ 4.278747] brd: module loaded <6>[ 4.284912] loop: module loaded <4>[ 4.290679] gps_probe() : gpio - 0 <4>[ 4.295166] valuepack_probe() <4>[ 4.295166] DC5V_EN1 init OK <4>[ 4.301971] Cradle_en init OK <4>[ 4.301971] Valuepack_en init OK <4>[ 4.309020] Valuepack_upgrade init OK <4>[ 4.313262] Valuepack_wakeup init OK <4>[ 4.317260] valuepack_probe(): create sysfs <4>[ 4.317260] hotswap_probe() : gpio - 56 <6>[ 4.317260] i2c i2c-4: mpu3050: +bma150 <6>[ 4.330963] i2c i2c-4: Installing Accel irq using 189 <6>[ 4.336975] i2c i2c-4: mpu3050: +ams0303 <4>[ 4.341369] i2c i2c-4: WARNING: Compass irq not assigned <4>[ 4.347381] i2c i2c-4: mpu3050: No Pressure Present <4>[ 4.353027] mldl_cfg:Reset MPU3050 <6>[ 4.434997] i2c i2c-4: Installing irq using 198 <6>[ 4.440155] i2c i2c-4: Module Param interface = mpuirq <6>[ 4.440155] input: mpu-accel as /devices/virtual/input/input0 <4>[ 4.452911] i2c-core: driver [mpu3050] using legacy suspend method <4>[ 4.452911] i2c-core: driver [mpu3050] using legacy resume method <7>[ 4.466552] mpu_init <6>[ 4.469238] USB3803 USB HUB driver init <4>[ 4.469238] ### USB3803 HW Config <6>[ 4.635345] [usb3803_set_mode] write SP_ILOCK_REG (attempt 0) <6>[ 4.642059] [usb3803_set_mode] read SP_ILOCK_REG : 0x3 <6>[ 4.648193] [usb3803_set_mode] read CFGP_REG : 0x10 (default) <6>[ 4.655029] [usb3803_set_mode] read CFGP_REG : 0x90 <6>[ 4.660827] [usb3803_set_mode] read CFG1_REG : 0x1b (default) <6>[ 4.667663] [usb3803_set_mode] read CFG1_REG : 0x9b <6>[ 4.673645] [usb3803_set_mode] read SP_ILOCK_REG : 0x0 <4>[ 4.673645] USB3803 probed on mode hub <3>[ 4.692779] ============= vib probe =======### PN544_REQUEST_RESOURCE <6>[ 4.701721] PPP generic driver version 2.4.2 <6>[ 4.708160] PPP Deflate Compression module registered <6>[ 4.708160] PPP BSD Compression module registered <6>[ 4.720397] PPP MPPE Compression module registered <6>[ 4.726013] NET: Registered protocol family 24 <6>[ 4.739196] tun: Universal TUN/TAP device driver, 1.6 <6>[ 4.744812] tun: (C) 1999-2004 Max Krasnyansky <6>[ 4.752258] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <7>[ 4.759552] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 <7>[ 4.766204] ehci-omap ehci-omap.0: failed to get ehci port0 regulator <7>[ 4.773742] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3 <7>[ 4.782928] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM <6>[ 4.792694] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller <7>[ 4.799194] drivers/usb/core/inode.c: creating file 'devices' <7>[ 4.799194] drivers/usb/core/inode.c: creating file '001' <6>[ 4.805572] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 <7>[ 4.819946] ehci-omap ehci-omap.0: park 0 <7>[ 4.819946] ehci-omap ehci-omap.0: support lpm <6>[ 4.829498] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00 <7>[ 4.835845] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT <7>[ 4.845703] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN <6>[ 4.854949] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 <7>[ 4.861541] usb usb1: default language 0x0409 <7>[ 4.861541] usb usb1: udev 1, busnum 1, minor = 0 <6>[ 4.871643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 4.879241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 4.887298] usb usb1: Product: OMAP-EHCI Host Controller <6>[ 4.893188] usb usb1: Manufacturer: Linux 3.0.31 ehci_hcd <6>[ 4.899169] usb usb1: SerialNumber: ehci-omap.0 <7>[ 4.899169] usb usb1: usb_probe_device <7>[ 4.908813] usb usb1: configuration #1 chosen from 1 choice <7>[ 4.915191] usb usb1: adding 1-0:1.0 (config #1, interface 0) <7>[ 4.922088] hub 1-0:1.0: usb_probe_interface <7>[ 4.927062] hub 1-0:1.0: usb_probe_interface - got id <6>[ 4.932739] hub 1-0:1.0: USB hub found <6>[ 4.937042] hub 1-0:1.0: 3 ports detected <7>[ 4.937042] hub 1-0:1.0: standalone hub <7>[ 4.945953] hub 1-0:1.0: individual port power switching <7>[ 4.951965] hub 1-0:1.0: individual port over-current protection <7>[ 4.958587] hub 1-0:1.0: power on to power good time: 20ms <7>[ 4.964782] hub 1-0:1.0: local power source is good <7>[ 4.970184] hub 1-0:1.0: enabling power on all ports <7>[ 4.970184] drivers/usb/core/inode.c: creating file '001' <7>[ 4.982086] ehci-omap ehci-omap.0: ...powerup ports... <6>[ 5.018005] usbcore: registered new interface driver cdc_acm <6>[ 5.024566] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters <6>[ 5.033630] usbcore: registered new interface driver usblp <6>[ 5.033630] usbcore: registered new interface driver cdc_wdm <6>[ 5.046142] Initializing USB Mass Storage driver... <6>[ 5.046142] usbcore: registered new interface driver usb-storage <6>[ 5.058319] USB Mass Storage support registered. <6>[ 5.058319] usbcore: registered new interface driver usbserial <6>[ 5.070129] USB Serial support registered for generic <6>[ 5.070129] usbcore: registered new interface driver usbserial_generic <7>[ 5.083099] ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT <6>[ 5.092926] usbserial: USB Serial Driver core <6>[ 5.097930] USB Serial support registered for cp210x <7>[ 5.103424] hub 1-0:1.0: port 1: status 0501 change 0001 <6>[ 5.109466] usbcore: registered new interface driver cp210x <6>[ 5.115783] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver <6>[ 5.123352] USB Serial support registered for FTDI USB Serial Device <6>[ 5.130615] usbcore: registered new interface driver ftdi_sio <6>[ 5.130615] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver <6>[ 5.143585] USB Serial support registered for GSM modem (1-port) <6>[ 5.143585] usbcore: registered new interface driver option <6>[ 5.143585] option: v0.7.2:USB Driver for GSM modems <6>[ 5.164367] android_usb gadget: Mass Storage Function, version: 2009/09/11 <6>[ 5.171997] android_usb gadget: Number of LUNs=1 <6>[ 5.177215] lun0: LUN: removable file: (no medium) <6>[ 5.183044] android_usb gadget: android_usb ready <6>[ 5.188385] mousedev: PS/2 mouse device common for all mice <6>[ 5.194854] input: omap4-keypad as /devices/platform/omap/omap4-keypad/input/input1 <6>[ 5.204162] input: maXTouch as /devices/platform/omap/omap_i2c.2/i2c-2/2-004a/input/input2 <7>[ 5.215332] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000 <7>[ 5.221588] hub 1-0:1.0: devnum:1 devpath:0 route:0 ttport:0 parent:0 <7>[ 5.221649] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s <7>[ 5.283569] ehci-omap ehci-omap.0: port 1 high speed <7>[ 5.289337] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT <3>[ 5.316070] mxt_power_on is finished <6>[ 5.407318] usb 1-1: new high speed USB device number 2 using ehci-omap <7>[ 5.499450] ehci-omap ehci-omap.0: port 1 high speed <7>[ 5.499450] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT <3>[ 5.619537] mxt_power_off is finished <3>[ 5.801300] mxt_power_on is finished <7>[ 5.837066] usb 1-1: udev 2, busnum 1, minor = 1 <6>[ 5.837127] usb 1-1: New USB device found, idVendor=0424, idProduct=3803 <6>[ 5.849700] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 <7>[ 5.849700] usb 1-1: usb_probe_device <7>[ 5.862060] usb 1-1: configuration #1 chosen from 1 choice <7>[ 5.868286] usb 1-1: adding 1-1:1.0 (config #1, interface 0) <7>[ 5.874816] hub 1-1:1.0: usb_probe_interface <7>[ 5.879577] hub 1-1:1.0: usb_probe_interface - got id <6>[ 5.885253] hub 1-1:1.0: USB hub found <6>[ 5.889587] hub 1-1:1.0: 3 ports detected <7>[ 5.894073] hub 1-1:1.0: compound device; port removable status: FFR <7>[ 5.894073] hub 1-1:1.0: individual port power switching <7>[ 5.906982] hub 1-1:1.0: individual port over-current protection <7>[ 5.913940] hub 1-1:1.0: TT per port <7>[ 5.918060] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) <7>[ 5.925140] hub 1-1:1.0: power on to power good time: 0ms <7>[ 5.956848] hub 1-1:1.0: local power source is good <7>[ 5.956848] hub 1-1:1.0: enabling power on all ports <7>[ 6.085937] drivers/usb/core/inode.c: creating file '002' <4>[ 6.111694] [jhjo] func(mxt_init_touch), line:1489 <6>[ 6.117431] Atmel MXT1664S 2-004a: family: 0xa2 variant: 0x0 version: 0x11 build: 0xaa matrix X,Y size: 32,52 number of obect: 27 <6>[ 6.134857] Atmel MXT1664S 2-004a: maXTouch: 27 Objects <6>[ 6.140747] Atmel MXT1664S 2-004a: maXTouch: 60 report ID <7>[ 6.281188] hub 1-1:1.0: port 3: status 0101 change 0001 <7>[ 6.400787] usb 1-1: link qh256-0001/c7b2b680 start 1 [1/0 us] <7>[ 6.407287] hub 1-1:1.0: state 7 ports 3 chg 0008 evt 0000 <7>[ 6.560485] hub 1-1:1.0: devnum:2 devpath:1 route:0 ttport:0 parent:c7b27c00 <6>[ 6.568420] Atmel MXT1664S 2-004a: Mxt touch success initialization <7>[ 6.575500] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s <6>[ 6.575500] twl6030_pwrbutton_probe: Enter <6>[ 6.576232] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input3 <4>[ 6.580993] !!!!!!!!!!!!!! light suspend <6>[ 6.581512] input: isl29023 light sensor as /devices/virtual/input/input4 <4>[ 6.581665] isl29023 input_dev success <6>[ 6.614624] Atmel MXT1664S 2-004a: calibration is on going !! <6>[ 6.621154] isl29023 4-0044: driver version 1.0 enabled <6>[ 6.627075] Atmel MXT1664S 2-004a: reset is ongoing <4>[ 6.627105] i2c-core: driver [isl29023] using legacy suspend method <4>[ 6.627136] i2c-core: driver [isl29023] using legacy resume method <6>[ 6.630615] using rtc device, twl_rtc, for alarms <6>[ 6.630615] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 <6>[ 6.658386] i2c /dev entries driver <6>[ 6.662536] Atmel MXT1664S 2-004a: normal mode <6>[ 6.663299] lirc_dev: IR Remote Control driver registered, major 249 <6>[ 6.663299] IR NEC protocol handler initialized <6>[ 6.663299] IR RC5(x) protocol handler initialized <6>[ 6.663330] IR RC6 protocol handler initialized <6>[ 6.663330] IR JVC protocol handler initialized <6>[ 6.663360] IR Sony protocol handler initialized <6>[ 6.663360] IR RC5 (streamzap) protocol handler initialized <6>[ 6.663360] IR LIRC bridge handler initialized <6>[ 6.663360] Linux video capture interface: v2.00 <6>[ 6.663391] usbcore: registered new interface driver uvcvideo <6>[ 6.663574] USB Video Class driver (v1.1.0) <6>[ 6.663574] dmm: probe base: fd300000, irq 145 <6>[ 6.667358] max17040 1-0036: MAX17040 Fuel-Gauge Ver 02 <6>[ 6.739166] Atmel MXT1664S 2-004a: normal mode <6>[ 6.820831] usb 1-1.3: new full speed USB device number 3 using ehci-omap <4>[ 6.979125] soc1 0x73 soc2 0x89 <4>[ 7.133300] Battery model was loaded successful <4>[ 7.138519] i2c-core: driver [max17040] using legacy suspend method <4>[ 7.145568] i2c-core: driver [max17040] using legacy resume method <7>[ 7.153625] usb 1-1.3: skipped 3 descriptors after interface <7>[ 7.160522] usb 1-1.3: skipped 4 descriptors after interface <7>[ 7.166931] usb 1-1.3: skipped 2 descriptors after interface <7>[ 7.173370] usb 1-1.3: skipped 2 descriptors after interface <7>[ 7.179931] usb 1-1.3: default language 0x0409 <7>[ 7.186126] usb 1-1.3: udev 3, busnum 1, minor = 2 <6>[ 7.186126] usb 1-1.3: New USB device found, idVendor=0482, idProduct=0232 <6>[ 7.199127] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 <6>[ 7.207275] usb 1-1.3: Product: KCMP <6>[ 7.211334] usb 1-1.3: Manufacturer: KYOCERA CORPORATION <7>[ 7.218200] usb 1-1.3: usb_probe_device <7>[ 7.222625] usb 1-1.3: configuration #1 chosen from 1 choice <7>[ 7.229827] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) <7>[ 7.238281] usbserial_generic 1-1.3:1.0: usb_probe_interface <7>[ 7.244689] usbserial_generic 1-1.3:1.0: usb_probe_interface - got id <7>[ 7.252441] usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) <7>[ 7.259765] cdc_acm 1-1.3:1.1: usb_probe_interface <7>[ 7.259765] cdc_acm 1-1.3:1.1: usb_probe_interface - got id <6>[ 7.271697] twl6030_bci twl6030_bci: Battery Voltage at Bootup is 0 mV <6>[ 7.279174] cdc_acm 1-1.3:1.1: ttyACM0: USB ACM device <7>[ 7.285980] usb 1-1.3: adding 1-1.3:1.2 (config #1, interface 2) <7>[ 7.293457] usb 1-1.3: adding 1-1.3:1.3 (config #1, interface 3) <7>[ 7.301422] cdc_wdm 1-1.3:1.3: usb_probe_interface <7>[ 7.306823] cdc_wdm 1-1.3:1.3: usb_probe_interface - got id <7>[ 7.313323] cdc_wdm 1-1.3:1.3: looking for a minor, starting at 176 <6>[ 7.320587] cdc_wdm 1-1.3:1.3: cdc-wdm0: USB WDM device <7>[ 7.327087] usb 1-1.3: adding 1-1.3:1.4 (config #1, interface 4) <6>[ 7.335723] OMAP Watchdog Timer Rev 0x00: initial timeout 30 sec <6>[ 7.343322] Bluetooth: HCI UART driver ver 2.2 <7>[ 7.348663] usbserial_generic 1-1.3:1.4: usb_probe_interface <7>[ 7.355041] usbserial_generic 1-1.3:1.4: usb_probe_interface - got id <6>[ 7.362274] Bluetooth: HCI H4 protocol initialized <6>[ 7.367950] cpuidle: using governor ladder <7>[ 7.368377] drivers/usb/core/inode.c: creating file '003' <7>[ 7.368377] hub 1-1:1.0: state 7 ports 3 chg 0000 evt 0008 <6>[ 7.384674] cpuidle: using governor menu <6>[ 7.398834] usbcore: registered new interface driver usbhid <6>[ 7.404998] usbhid: USB HID core driver <6>[ 7.410339] logger: created 256K log 'log_main' <6>[ 7.415771] logger: created 256K log 'log_events' <6>[ 7.415771] logger: created 256K log 'log_radio' <6>[ 7.426422] logger: created 256K log 'log_system' <3>[ 7.432159] No CPUfreq policy at this point. <3>[ 7.437408] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! <6>[ 7.452606] SDP4430 SoC init <6>[ 7.466186] input: headset_hook as /devices/virtual/input/input5 <4>[ 7.466186] twl6040-codec twl6040-codec: couldn't get VDDHF regulator -19 <6>[ 7.491333] asoc: null-codec-dai <-> MultiMedia1 mapping ok <6>[ 7.500213] asoc: null-codec-dai <-> MultiMedia2 mapping ok <6>[ 7.508728] asoc: null-codec-dai <-> Voice mapping ok <6>[ 7.515991] asoc: null-codec-dai <-> Tones mapping ok <6>[ 7.522430] asoc: null-codec-dai <-> Vibra mapping ok <6>[ 7.530151] asoc: null-codec-dai <-> MODEM mapping ok <6>[ 7.536804] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok <6>[ 7.544769] mmc0: new high speed DDR MMC card at address 0001 <6>[ 7.551666] mmcblk0: mmc0:0001 SEM16G 14.6 GiB <6>[ 7.557281] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok <6>[ 7.565185] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB <6>[ 7.572021] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB <6>[ 7.572326] asoc: twl6040-dl1 <-> mcpdm-dl mapping ok <6>[ 7.575592] asoc: dmic-hifi <-> omap-dmic-dai-0 mapping ok <4>[ 7.578277] twl6040-codec twl6040-codec: ASoC: Failed to create Aux/FM Stereo In debugfs file <6>[ 7.579437] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok <6>[ 7.580688] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok <6>[ 7.581848] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok <6>[ 7.583007] asoc: twl6040-vib <-> mcpdm-vib mapping ok <6>[ 7.584136] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok <6>[ 7.585357] asoc: Bluetooth <-> omap-mcbsp-dai.0 mapping ok <6>[ 7.586761] asoc: FM Digital <-> omap-mcbsp-dai.1 mapping ok <6>[ 7.588012] asoc: MODEM <-> omap-mcbsp-dai.1 mapping ok <6>[ 7.589233] asoc: dmic-hifi <-> omap-dmic-abe-dai-0 mapping ok <6>[ 7.590240] asoc: dmic-hifi <-> omap-dmic-abe-dai-1 mapping ok <6>[ 7.591583] asoc: dmic-hifi <-> omap-dmic-abe-dai-2 mapping ok <6>[ 7.592590] asoc: null-codec-dai <-> omap-abe-vxrec-dai mapping ok <6>[ 7.595672] input: BP50 Headset Jack as /devices/platform/soc-audio/sound/card0/input6 <6>[ 7.599426] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok <6>[ 7.599426] ALSA device list: <6>[ 7.599426] #0: TI OMAP4 Board <6>[ 7.600952] #1: OMAP4HDMI <6>[ 7.600952] GACT probability NOT on <6>[ 7.601165] Mirror/redirect action on <6>[ 7.601165] u32 classifier <6>[ 7.601196] Actions configured <6>[ 7.601196] Netfilter messages via NETLINK v0.30. <6>[ 7.601196] nf_conntrack version 0.5.0 (10910 buckets, 43640 max) <6>[ 7.602783] ctnetlink v0.93: registering with nfnetlink. <6>[ 7.602783] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 <6>[ 7.602874] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. <6>[ 7.602874] xt_time: kernel timezone is -0000 <6>[ 7.605895] ip_tables: (C) 2000-2006 Netfilter Core Team <6>[ 7.606872] arp_tables: (C) 2002 David S. Miller <6>[ 7.606964] TCP cubic registered <6>[ 7.606964] NET: Registered protocol family 10 <6>[ 7.611724] Mobile IPv6 <6>[ 7.611724] ip6_tables: (C) 2000-2006 Netfilter Core Team <6>[ 7.611724] IPv6 over IPv4 tunneling driver <6>[ 7.619537] NET: Registered protocol family 17 <6>[ 7.624725] NET: Registered protocol family 15 <5>[ 7.624786] Bridge firewalling registered <6>[ 7.625274] Bluetooth: RFCOMM TTY layer initialized <6>[ 7.625366] Bluetooth: RFCOMM socket layer initialized <6>[ 7.625366] Bluetooth: RFCOMM ver 1.11 <6>[ 7.625396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 <6>[ 7.625396] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 <6>[ 7.625549] L2TP core driver, V2.0 <6>[ 7.625549] PPPoL2TP kernel driver, V2.0 <6>[ 7.625549] NET: Registered protocol family 35 <6>[ 7.626007] lib80211: common routines for IEEE802.11 drivers <7>[ 7.626007] lib80211_crypt: registered algorithm 'NULL' <6>[ 7.626037] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 <6>[ 7.854553] ThumbEE CPU extension supported. <5>[ 7.864227] Registering SWP/SWPB emulation handler <4>[ 7.872070] Alternate GPT is invalid, using primary GPT. <4>[ 7.872924] ------------[ cut here ]------------ <4>[ 7.872924] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:135 l3_interrupt_handler+0x2e0/0x380() <4>[ 7.872985] CUSTOM SRESP error with SOURCE:L4 PER2 <4>[ 7.872985] Modules linked in: <4>[ 7.872985] Backtrace: <4>[ 7.873016] [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) <4>[ 7.873016] r6:00000087 r5:c0088b1c r4:c782bb08 r3:c782a000 <4>[ 7.873077] [] (dump_stack+0x0/0x1c) from [] (warn_slowpath_common+0x5c/0x6c) <4>[ 7.873077] [] (warn_slowpath_common+0x0/0x6c) from [] (warn_slowpath_fmt+0x38/0x40) <4>[ 7.873077] r8:00000002 r7:c8844b48 r6:00080003 r5:c0856764 r4:c8844b00 <4>[ 7.873168] r3:00000009 <4>[ 7.873168] [] (warn_slowpath_fmt+0x0/0x40) from [] (l3_interrupt_handler+0x2e0/0x380) <4>[ 7.873199] r3:c07884f0 r2:c07883f4 <4>[ 7.873199] [] (l3_interrupt_handler+0x0/0x380) from [] (handle_irq_event_percpu+0x58/0x188) <4>[ 7.873199] [] (handle_irq_event_percpu+0x0/0x188) from [] (handle_irq_event+0x44/0x64) <4>[ 7.873260] [] (handle_irq_event+0x0/0x64) from [] (handle_fasteoi_irq+0xa4/0x144) <4>[ 7.873291] r6:0000002a r5:c0829b8c r4:c0829b40 r3:c00564f0 <4>[ 7.873291] [] (handle_fasteoi_irq+0x0/0x144) from [] (generic_handle_irq+0x40/0x48) <4>[ 7.873291] r5:c0056eb0 r4:c0838590 <4>[ 7.873291] [] (generic_handle_irq+0x0/0x48) from [] (asm_do_IRQ+0x60/0xc0) <4>[ 7.873291] [] (asm_do_IRQ+0x0/0xc0) from [] (__irq_svc+0x48/0xe0) <4>[ 7.873291] Exception stack(0xc782bbf8 to 0xc782bc40) <4>[ 7.873413] bbe0: c782bc28 00000000 <4>[ 7.873413] bc00: c782a000 c0855824 a0000113 c08525fc a0000113 c085a9d4 3b9aca00 c782bca0 <4>[ 7.873413] bc20: 00000000 c782bc54 ffffffff c782bc40 c063ecec c063ecf0 60000113 ffffffff <4>[ 7.873474] r7:00000002 r6:0000002a r5:fa240100 r4:ffffffff <4>[ 7.873474] [] (_raw_spin_unlock_irqrestore+0x0/0x44) from [] (omap_hwmod_idle+0x3c/0x44) <4>[ 7.873535] r4:c08525b0 r3:c0855824 <4>[ 7.873535] [] (omap_hwmod_idle+0x0/0x44) from [] (omap_device_idle_hwmods+0x30/0x44) <4>[ 7.873535] r6:00000000 r5:c7892c00 r4:00000001 r3:00000001 <4>[ 7.873596] [] (omap_device_idle_hwmods+0x0/0x44) from [] (_omap_device_deactivate+0x7c/0x118) <4>[ 7.873596] r5:c085a9d4 r4:c7892c00 <4>[ 7.873596] [] (_omap_device_deactivate+0x0/0x118) from [] (omap_device_idle+0x28/0x74) <4>[ 7.873657] [] (omap_device_idle+0x0/0x74) from [] (_od_runtime_suspend+0x24/0x2c) <4>[ 7.873657] r4:00000000 <4>[ 7.873687] [] (_od_runtime_suspend+0x0/0x2c) from [] (rpm_callback+0x54/0x68) <4>[ 7.873687] r5:c7892c08 r4:c0091250 <4>[ 7.873718] [] (rpm_callback+0x0/0x68) from [] (rpm_suspend+0x110/0x494) <4>[ 7.873718] r6:00000000 r5:00000000 r4:c7892c08 r3:c085a250 <4>[ 7.873718] [] (rpm_suspend+0x0/0x494) from [] (__pm_runtime_suspend+0x80/0xac) <4>[ 7.873718] [] (__pm_runtime_suspend+0x0/0xac) from [] (pm_generic_runtime_idle+0x4c/0x54) <4>[ 7.873809] r7:c7892c7c r6:c0091218 r5:c7892c08 r4:c7892c08 <4>[ 7.873840] [] (pm_generic_runtime_idle+0x0/0x54) from [] (_od_runtime_idle+0x10/0x14) <4>[ 7.873840] r4:00000000 r3:00000000 <4>[ 7.873870] [] (_od_runtime_idle+0x0/0x14) from [] (rpm_idle+0xe0/0x180) <4>[ 7.873870] [] (rpm_idle+0x0/0x180) from [] (__pm_runtime_idle+0x6c/0x98) <4>[ 7.873901] r7:60000113 r6:c7892c7c r5:00000004 r4:c7892c08 <4>[ 7.873901] [] (__pm_runtime_idle+0x0/0x98) from [] (omap_i2c_idle+0x88/0xcc) <4>[ 7.873901] r7:c08d6668 r6:c78d8000 r5:c7892c08 r4:c78d8000 <4>[ 7.873901] [] (omap_i2c_idle+0x0/0xcc) from [] (omap_i2c_xfer+0x180/0x7c4) <4>[ 7.873992] r5:c78d80a8 r4:c78d8000 <4>[ 7.873992] [] (omap_i2c_xfer+0x0/0x7c4) from [] (i2c_transfer+0xb8/0xec) <4>[ 7.874023] [] (i2c_transfer+0x0/0xec) from [] (twl_i2c_read+0xc8/0x158) <4>[ 7.874023] [] (twl_i2c_read+0x0/0x158) from [] (twl_i2c_read_u8+0x14/0x18) <4>[ 7.874114] [] (twl_i2c_read_u8+0x0/0x18) from [] (twl6030_set_offset+0x34/0x130) <4>[ 7.874114] [] (twl6030_set_offset+0x0/0x130) from [] (twl_set_4430vcore+0x10/0x28) <4>[ 7.874145] r5:c003de28 r4:c003dd44 <4>[ 7.874145] [] (twl_set_4430vcore+0x0/0x28) from [] (omap_pmic_register_data+0xe8/0x158) <4>[ 7.874145] [] (omap_pmic_register_data+0x0/0x158) from [] (omap_twl_init+0x2c/0x34) <4>[ 7.874206] r6:00000000 r5:c003c600 r4:c0892980 <4>[ 7.874206] [] (omap_twl_init+0x0/0x34) from [] (omap_pmic_data_init+0x10/0x14) <4>[ 7.874206] [] (omap_pmic_data_init+0x0/0x14) from [] (omap2_common_pm_late_init+0x10/0xcc) <4>[ 7.874267] [] (omap2_common_pm_late_init+0x0/0xcc) from [] (do_one_initcall+0x3c/0x18c) <4>[ 7.874298] r4:c0892980 r3:c782a000 <4>[ 7.874298] [] (do_one_initcall+0x0/0x18c) from [] (kernel_init+0xb0/0x13c) <4>[ 7.874298] r9:00000000 r8:00000000 r7:00000013 r6:c00b1ff4 r5:c003c600 <4>[ 7.874359] r4:c003c58c <4>[ 7.874359] [] (kernel_init+0x0/0x13c) from [] (do_exit+0x0/0x720) <4>[ 7.874359] r5:c0008334 r4:00000000 <4>[ 7.874450] ---[ end trace 4801d175ccd2c65c ]--- <3>[ 7.874450] Master 0x0 MPU <3>[ 7.874450] L4 PER2 OPCODE 0x00000000 <6>[ 7.877349] Reprogramming LPDDR2 timings to 400000000 Hz <4>[ 8.125885] sr_init: No PMIC hook to init smartreflex <6>[ 8.125946] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized <6>[ 8.126434] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized <6>[ 8.126647] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized <6>[ 8.469360] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 <6>[ 8.469390] SmartReflex class 1.5 driver: initialized (86400000ms) <6>[ 8.469696] cpufreq_interactive_input_connect: connect to maXTouch <3>[ 8.470458] Power Management for TI OMAP4. <6>[ 8.470642] OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1. <6>[ 8.470642] OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3. <6>[ 8.480957] clock: disabling unused clocks to save power <6>[ 8.518981] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1076140 margin=0 <6>[ 8.529846] twl_rtc twl_rtc: setting system clock to 2013-03-27 07:27:32 UTC (1364369252) <6>[ 8.539184] Atmel MXT1664S 2-004a: calibration is on going !! <6>[ 8.539215] mmcblk0boot1: unknown partition table <6>[ 8.551544] Atmel MXT1664S 2-004a: normal mode <6>[ 8.556549] Freeing init memory: 320K <6>[ 8.560791] mmcblk0boot0: unknown partition table <3>[ 8.568450] init: could not import file init.modem.rc <3>[ 8.574523] init: /init.bluebird.rc: 229: invalid option 'insmod' <4>[ 8.581542] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. <6>[ 8.591125] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=950000Calib=860920 margin=0 <6>[ 8.729034] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=962000Calib=898900 margin=0 <6>[ 8.740112] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1025000Calib=898900 margin=0 <6>[ 8.822723] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1200000Calib=1076140 margin=0 <6>[ 8.854858] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: <6>[ 8.939849] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1325000Calib=1126780 margin=0 <6>[ 8.955688] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 8.971466] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit <6>[ 8.987396] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit <3>[ 8.997558] EXT4-fs (mmcblk0p4): VFS: Can't find ext4 filesystem <6>[ 9.033599] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1388000Calib=1253380 margin=0 <6>[ 9.199981] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 6581428 <6>[ 9.263793] omap-rproc omap-rproc.1: remote processor ipu is now up <6>[ 9.283111] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 9.290161] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 9.299682] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 9.307586] omap_rpmsg_mbox_callback: received echo reply from ipu ! <3>[ 9.311889] HDCP: failed to load keys <3>[ 9.322570] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' <6>[ 9.334045] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60! <3>[ 9.344543] android_usb: already disabled <6>[ 9.353576] adb_open <6>[ 9.357635] mtp_bind_config <6>[ 9.361083] adb_bind_config <6>[ 9.443176] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60! <6>[ 9.573394] warning: `rild' uses 32-bit capabilities (legacy support in use) <6>[ 9.649749] omaplfbOMAPLFBInit: Blitsville gc2d not present, blits disabled <7>[ 9.658203] omaplfb: OMAPLFBInitIonOmap: Device 0: Requesting 2 TILER 2D framebuffers <6>[ 9.733367] android_work: sent uevent USB_STATE=CONNECTED <6>[ 9.752563] android_work: sent uevent USB_STATE=DISCONNECTED <6>[ 9.803771] android_usb gadget: high speed config #1: android <6>[ 9.810455] android_work: sent uevent USB_STATE=CONFIGURED <6>[ 9.927185] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null) <6>[ 9.992889] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null) <7>[ 10.091644] LD070WX3 display0: update brightness to 127 <7>[ 10.111358] LD070WX3 display0: update brightness to 127 <7>[ 10.129058] LD070WX3 display0: update brightness to 127 <7>[ 10.695709] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 10.962951] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 10.969757] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 10.976257] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 10.984527] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 11.032409] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 11.038818] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 12.016540] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 12.025085] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 15.030059] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 15.036407] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 15.294433] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 15.301391] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 15.349029] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 15.355377] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <4>[ 16.072906] !!!!!!!!!!!!!! light resume <4>[ 16.080200] !!!!!!!!!!!!!! light suspend <7>[ 16.111541] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 16.119476] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <6>[ 18.545074] request_suspend_state: wakeup (3->0) at 18542755129 (2013-03-27 07:27:42.555877686 UTC) <7>[ 18.559051] LD070WX3 display0: update brightness to 127 <3>[ 18.877258] init: no such service 'dhcpcd_:-h android-a1fb592f05430a99 ' <6>[ 18.972625] acc_open <6>[ 18.975036] acc_release <7>[ 19.448516] usb 1-1.3: link qh16-0e01/c691bcc0 start 3 [1/2 us] <7>[ 20.154296] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 20.160552] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <4>[ 20.278686] gps enable 1 <7>[ 20.492431] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 20.509094] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 20.556182] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 20.562500] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <6>[ 20.674621] mtp_open <7>[ 21.766998] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 21.783905] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 25.883605] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 25.890441] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 26.151519] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 26.158508] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 26.165771] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 26.172760] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 26.180267] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 26.228027] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 26.234741] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 27.424682] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 27.433685] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 27.440307] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 27.447296] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 30.467498] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 30.474243] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 30.735260] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 30.743347] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 30.751373] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 30.761596] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d80 <7>[ 30.809112] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 30.815826] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 32.005462] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 32.013641] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 32.020019] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 32.033660] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 35.084655] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 35.091461] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 35.352569] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 35.359741] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 35.368103] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 35.375213] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 35.383666] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 35.431671] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 35.438385] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 36.563568] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 36.571777] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d80 <7>[ 40.624969] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 40.631835] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 40.905059] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 40.913238] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 40.922515] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 40.929779] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 40.937408] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 40.985870] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 40.992431] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 42.179840] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 42.191314] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 42.198303] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 42.204925] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 45.254364] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 45.260986] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 45.522308] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 45.530242] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 45.539550] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 45.547393] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 45.594848] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 45.601409] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 46.652679] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 46.660675] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 50.713439] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 50.720275] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 50.986877] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 50.994049] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 51.001800] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 51.011352] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d80 <7>[ 51.022460] usb 1-1: clear tt buffer port 3, a3 ep2 t80808d82 <7>[ 51.070770] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 51.077331] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 52.262268] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 52.270324] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d80 <7>[ 52.276947] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 55.307220] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 55.313964] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 55.574981] usb 1-1.3: unlink qh16-0e01/c6ebc680 start 2 [1/2 us] <7>[ 55.582153] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 55.590118] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 55.598175] usb 1-1: clear tt buffer port 3, a3 ep2 t00808d82 <7>[ 55.645385] ehci-omap ehci-omap.0: reused qh c6ebc680 schedule <7>[ 55.652099] usb 1-1.3: link qh16-0e01/c6ebc680 start 2 [1/2 us] root@android:/ #